sacadm(1M)						  System Administration Commands						sacadm(1M)

NAME

       sacadm - service access controller administration

SYNOPSIS

       sacadm -a -p pmtag -t type -c cmd -v ver [ -f dx] [-n count] [-y comment] [-z script]

       sacadm -r -p pmtag

       sacadm -s -p pmtag

       sacadm -k -p pmtag

       sacadm -e -p pmtag

       sacadm -d -p pmtag

       sacadm -l [-p pmtag | -t type]

       sacadm -L [-p pmtag | -t type]

       sacadm -g -p pmtag [-z script]

       sacadm -G [-z script]

       sacadm -x [-p pmtag]

DESCRIPTION

       sacadm  is  the	administrative	command for the upper level of the Service Access Facility hierarchy (port monitor administration). sacadm
       performs the following functions:

	 o  adds or removes a port monitor

	 o  starts or stops a port monitor

	 o  enables or disables a port monitor

	 o  installs or replaces a per-system configuration script

	 o  installs or replaces a per-port monitor configuration script

	 o  prints requested port monitor information

       Requests about the status of port monitors (-l and -L) and requests to print per-port monitor and per-system configuration scripts (-g  and
       -G without the -z option) may be executed by any user on the system. Other sacadm commands may be executed only by the super-user.

OPTIONS

       -a	       Add  a port monitor. When adding a port monitor, sacadm creates the supporting directory structure in /etc/saf and /var/saf
		       and adds an entry for the new port monitor to /etc/saf/_sactab. The file _sactab already exists on  the	delivered  system.
		       Initially, it is empty except for a single line, which contains the version number of the Service Access Controller. Unless
		       the command line that adds the new port monitor includes the -f option with the -x argument, the new port monitor  will	be
		       started.  Because  of the complexity of the options and arguments that follow the - a option, it may be convenient to use a
		       command script or the menu system to add port monitors.

       -c cmd	       Execute the command string cmd to start a port monitor. The -c option may be used only with a -a. A -a  option  requires  a
		       -c.

       -d	       Disable the port monitor pmtag.

       -e	       Enable the port monitor pmtag.

       -f dx	       The  -f	option	specifies one or both of the following two flags which are then included in the flags field of the _sactab
		       entry for the new port monitor. If the -f option is not included on the command line, no flags are set and the default con-
		       ditions prevail. By default, a port monitor is started. A -f option with no following argument is illegal.

		       d	Do not enable the new port monitor.

		       x	Do not start the new port monitor.

       -g	       The  -g	option	is  used  to  request  output  or  to  install	or  replace  the  per-port  monitor  configuration  script
		       /etc/saf/pmtag/_config. -g requires a -p option. The -g option with only a -p option prints the per-port monitor configura-
		       tion  script  for  port monitor pmtag. The -g option with a -p option and a -z option installs  the file script as the per-
		       port monitor configuration script for port monitor pmtag. Other combinations of options with -g are invalid.

       -G	       The -G option is used to request output or to install or replace the per-system configuration  script  /etc/saf/_sysconfig.
		       The -G option by itself prints the per-system configuration script. The -G option in combination with a -z option  installs
		       the file script as the per-system configuration script. Other combinations of options with a -G option are invalid.

       -k	       Stop port monitor pmtag.

       -l	       The -l option is used to request port monitor information. The -l by itself lists all port monitors on the system.  The	-l
		       option  in  combination with the -p option lists only the  port monitor specified by pmtag. A -l in combination with the -t
		       option lists all port monitors of type type. Any other combination of options with the -l option is invalid.

       -L	       The -L option is identical to the -l option except that the output appears in a condensed format.

       -n count        Set the restart count to count. If a restart count is not specified, count is set to 0. A count of  0  indicates  that  the
		       port monitor is not to be restarted if it fails.

       -p pmtag        Specifies the tag associated with a port monitor.

       -r	       Remove  port monitor pmtag. sacadm removes the port monitor entry from /etc/saf/_sactab. If the removed port monitor is not
		       running, then no further action is taken. If the removed port monitor is running, the Service Access Controller (SAC) sends
		       it SIGTERM to indicate that it should shut down. Note that the port monitor's directory structure remains intact.

       -s	       Start a port monitor. The SAC starts the port monitor pmtag.

       -t type	       Specifies the port monitor type.

       -v ver	       Specifies the version number of the port monitor. This version number may be given as

		       -v `pmspec -V`

		       where  pmspec  is  the special administrative command for port monitor pmtag. This special command is ttyadm for ttymon and
		       nlsadmin for listen. The version stamp of the port monitor is known by the command and is returned when pmspec  is  invoked
		       with a -V option.

       -x	       The  -x	option	by  itself  tells the SAC to read its database file (_sactab). The -x option with the -p option tells port
		       monitor pmtag to read its administrative file.

       -y comment      Include comment in the _sactab entry for port monitor pmtag.

       -z script       Used with the -g and -G options to specify the name of a file that contains a configuration script.  With  the  -g  option,
		       script  is a per-port monitor configuration script; with -G it is a per-system configuration script. Modifying a configura-
		       tion script is a three-step procedure. First a copy of the existing script is made (-g or -G). Then  the  copy  is  edited.
		       Finally, the copy is put in place over the existing script (-g or -G with -z).

OUTPUT

       If  successful,	sacadm	will  exit  with  a  status of 0. If sacadm fails for any reason, it will exit with a nonzero status. Options that
       request information will write the information on the standard output. In the condensed format (-L), port monitor information is printed as
       a sequence of colon-separated fields; empty fields are indicated by two successive colons. The standard format (-l) prints a header identi-
       fying the columns, and port monitor information is aligned under the appropriate headings. In this format, an empty field is indicated by a
       hyphen. The comment character is #.

EXAMPLES

       Example 1: A sample output of the sacadm command.

       The  following  command	line  adds  a port monitor. The port monitor tag is npack; its type is listen; if necessary, it will restart three
       times before failing; its administrative command is nlsadmin; and the configuration script to be read is in the file script:

       sacadm -a -p npack -t listen -c /usr/lib/saf/listen npack
       -v `nlsadmin -V` -n 3 -z script

       Remove a port monitor whose tag is pmtag:

       sacadm -r -p pmtag

       Start the port monitor whose tag is pmtag:

       sacadm -s -p pmtag

       Stop the port monitor whose tag is pmtag:

       sacadm -k -p pmtag

       Enable the port monitor whose tag is pmtag:

       sacadm -e -p pmtag

       Disable the port monitor whose tag is pmtag:

       sacadm -d -p pmtag

       List status information for all port monitors:

       sacadm -l

       List status information for the port monitor whose tag is pmtag:

       sacadm -l -p pmtag

       List the same information in condensed format:

       sacadm -L -p pmtag

       List status information for all port monitors whose type is listen:

       sacadm -l -t listen

       Replace the per-port monitor configuration script associated with the port monitor whose tag  is  pmtag	with  the  contents  of  the  file
       file.config:

       sacadm -g -p pmtag -z file.config

FILES

       /etc/saf/_sactab

       /etc/saf/_sysconfig

       /etc/saf/pmtag/_config

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       pmadm(1M), sac(1M), doconfig(3NSL), attributes(5)

SunOS 5.10							    14 Sep 1992 							sacadm(1M)