Ok,
in HMC for that particular LPAR what is the Keylock position?
Check to see if any body has set it to manual, if so reset it to Normal and reactivate the LPAR.
Hi guys
I have joined a new department and one of my tasks is to investigate the feasibility of upgrading our current AIX v 4.3 to V5.3.
I do not know anything about AIX and any actual work will be done by an outside consultant until such time as I have built up my own knowledge.
The system we... (3 Replies)
Hello everyone, I have to do a ML upgrade on AIX 5.2 from 01 to 09
this is the first time iam going to do it.
are there any command i have to keep in mind??
thanks! (1 Reply)
I have an IBM P520 that I need to upgrade from 5.2 to 5.3. My background in Unix is from 15 years ago so I don't remember much. IBM documentation is hard to find. Any help would be appreciated. (1 Reply)
I have an AIX LPAR that is one half of a Oracle RAC cluster running over a GPFS filesystem.
The OS version in the LPAR was 5300-05-01
I ran an upgrade to 5300-07-05 (Apply only, Commit=NO and preserve old files).
The preview passed with no failures detected.
The actual upgrade failed... (5 Replies)
Hello Folks,
i am facing some weired issues.
case is like this :-
initially i was on AIX 5.3
i have installed filesets related to my application and those were in APPLY state.(COMMIT is set as NO)
Then i have taken lslpp -l| grep -i <apps name>
in that i confirmed whether the filesets are... (1 Reply)
i upgrade aix ml 5.3.2.1 to 5.3.2.2 but when running commnd #oslevel -r
shows out put, again 5.3.2.1-- where should i chek???
2-can any one tell me when mknfs command run which files get updated?? (2 Replies)
Hi all,
i would like to know if it's possible upgrade AIX 5.3 to 6.1 on a LPAR without use the HMC.
so i would like to know if i must use the console to do it or i can do all from the up&running system on LPAR.
Thanks in advance.
Mario (4 Replies)
Dear Guys ..
I'm going to Upgrade one of the servers AIX 6.1
I want to stop rootvg mirror to save the mirror then upgrade to AIX 6.1 this is to help me in rollback if something goes wrong but ..
can anyone help me how to make sure that system is relay mirrored and how to know that second... (10 Replies)
Discussion started by: top.level
10 Replies
LEARN ABOUT CENTOS
redhat-upgrade-tool-cli
REDHAT-UPGRADE-TOOL(8) redhat-upgrade-tool User Manual REDHAT-UPGRADE-TOOL(8)NAME
redhat-upgrade-tool - Red Hat Upgrade tool
SYNOPSIS
redhat-upgrade-tool [OPTIONS] SOURCE
DESCRIPTION
redhat-upgrade-tool is the Red Hat Upgrade tool.
The redhat-upgrade-tool client runs on the system to be upgraded. It determines what packages are needed for upgrade and gathers them from
the source(s) given. It also fetches and sets up the boot images needed to run the upgrade and sets up the system to perform the upgrade at
next boot.
The actual upgrade takes place when the system is rebooted, using the boot images set up by redhat-upgrade-tool. The upgrade initrd starts
the existing system (mostly) as normal, lets it mount all the local filesystems, then starts the upgrade.
When the upgrade finishes, it reboots the system into the newly-upgraded OS.
OPTIONS
Optional arguments
-h, --help
Show a help message and exit.
-v, --verbose
Print more info.
-d, --debug
Print lots of debugging info.
--debuglog DEBUGLOG
Write debugging output to the given file. Defaults to /var/log/redhat-upgrade-tool.log.
--reboot
Automatically reboot to start the upgrade when ready.
SOURCE
These options tell redhat-upgrade-tool where to look for the packages and boot images needed to run the upgrade. At least one of these
options is required.
--device [DEV]
Device or mountpoint of mounted install media. If DEV is omitted, redhat-upgrade-tool will scan all currently-mounted removable devices
(USB disks, optical media, etc.)
--iso ISO
Installation image file.
--network VERSION
Online repos matching VERSION (a number or "rawhide")
Multiple sources may be used, if desired.
Additional options for --network
--enablerepo REPOID
Enable one or more repos (wildcards allowed).
--disablerepo REPOID
Disable one or more repos (wildcards allowed).
--addrepo REPOID=[@]URL
Add the repo at URL. Prefix URL with @ to indicate that the URL is a mirrorlist.
--instrepo REPOID
Get upgrader boot images from the repo named REPOID. The repo must contain a valid .treeinfo file which points to the location of
usable kernel and upgrade images.
Cleanup commands
--resetbootloader
Remove any modifications made to bootloader configuration.
--clean
Clean up everything written by redhat-upgrade-tool.
EXAMPLES
redhat-upgrade-tool --network 7.0 --instrepo <repo URL>
Upgrade to RHEL 7.0 by downloading all needed packages and data from the specified repository.
redhat-upgrade-tool --device --network 7.0
Upgrade to RHEL 7.0 using install media mounted somewhere on the system, fetching updates from the network if needed.
EXIT STATUS
0
Success.
1
Cancelled by user, failure writing files to disk, or other unknown error
2
Failed to download/copy files from the given SOURCE
3
RPM upgrade transaction test failed
BUGS
The --iso image must be on a filesystem listed in /etc/fstab.
AUTHORS
Will Woods <wwoods@redhat.com>
redhat-upgrade-tool 11/08/2013 REDHAT-UPGRADE-TOOL(8)