12-27-2013
Hello Robin,
thanks for the reply. I appreciate it.
The OS is Rhel 6.4
The Hardware is dell poweredge R610
Thank you kindly
Arrey
10 More Discussions You Might Find Interesting
1. HP-UX
In HP-UX 11.00
How can i check if there are disks mirrored (2 Replies)
Discussion started by: cgege
2 Replies
2. AIX
How do I know, which all disks are mirrored? any command?
Bala (7 Replies)
Discussion started by: balaji_prk
7 Replies
3. UNIX for Dummies Questions & Answers
What is the correct mkfs syntax to create mirrored disk files systems? I need to make the file system 20gb. For example:
machine# mkfs -F ufs /dev/md/dsk/d40
size not specified
ufs usage: mkfs special size(sectors) \
-m : dump fs cmd line used to make this partition
-V : print this... (4 Replies)
Discussion started by: GLJ@USC
4 Replies
4. UNIX for Dummies Questions & Answers
Hi all,
I have a V490 running with Solaris 10. The OS disk was mirrored. I wanted to break the mirror, boot with the secondary mirror, and re-mirror the OS with a new disk.
This is what I did,
detached the metadevices of the secondary mirror disk (disk 1)
metaclear-ed the metadevices,... (1 Reply)
Discussion started by: nitinp82
1 Replies
5. Solaris
Hello once again seeking your help,
I have a mirrored disk and need to unmirror it to mount it as a new file system (/export) but could not find the correct steps to do it with out affecting the original disk.
can anybody point me out on how to get this done.
Thanks!! (3 Replies)
Discussion started by: AQG
3 Replies
6. UNIX for Advanced & Expert Users
I have a HP proliant ML 570 G3 with two 146GB disk drives mirrored(RAID1+0)
windows server 2003 was installed on that disk.
I will add a disk.(scsi 300GB)
I will install Linux on that additional disk.
I want to create multiple-boot system.
Is it possible?
I wanna know how to create... (0 Replies)
Discussion started by: lifegeek
0 Replies
7. Solaris
Hi All,
We had a Sun Netra T1 go down the other day, the root disk was mirrored using vxvm. Upon boot from either disk, we had the following error appear:
WARNING: Error writing ufs log state
WARNING: ufs log for / changed state to Error
WARNING: Please umount(1M) / and run... (4 Replies)
Discussion started by: badoshi
4 Replies
8. Solaris
Hey everyone, I currently have a sparcstation 5, and am trying to run some scripts on it without booting off the hard drive.
Currently I am using a Solaris 8 install cd to boot into single user mode. However, the scripts I have are on a different CD.
What I would like to do is to use the... (6 Replies)
Discussion started by: idlechatter
6 Replies
9. Solaris
So I have mirrored disk already set up from c1t0d0 to c1t1d0. Is there some special procedures that I need to do before I do and then try to boot from the mirrored disk? I am using a V490 if that helps... (7 Replies)
Discussion started by: drew_1980
7 Replies
10. Solaris
I have a v480 with a mirrored boot disk c1t0 and c1t1. The drives themselves don't show a failure but the mirror's need maintenance.
This is my plan for replacing the drive. I would love feedback to point out what I"m missing or where my steps are incorrect.
Two things I believe I'm... (3 Replies)
Discussion started by: pcoffey
3 Replies
LEARN ABOUT CENTOS
biosdevname
BIOSDEVNAME(1) General Commands Manual BIOSDEVNAME(1)
NAME
biosdevname - give BIOS-given name of a device
SYNOPSIS
biosdevname [options] [args]...
DESCRIPTION
biosdevname takes a kernel device name as an argument, and returns the BIOS-given name it "should" be.
OPTIONS
-i, --interface
Treat [args] as ethernet devs
-d, --debug
Enable debugging
-p, --policy [physical|all_ethN]
-P, --prefix [string]
string use for embedded NICs in the physical policy (default=em)
-x, --nopirq
Do not use $PIR table for mapping PCI device to slot. Some BIOS have incorrect values.
-s, --smbios [x.y]
Require minimum SMBIOS version x.y
POLICIES
The physical policy is the current default. However, when invoking biosdevname in udev rules, one should always specify the policy you
want, as the default has changed over time.
The physical policy uses the following scheme:
em<port>[_<virtual instance>]
for embedded NICs
p<slot>p<port>[_<virtual instance>]
for cards in PCI slots
The all_ethN policy makes a best guess at what the device order should be, with embedded devices first, PCI cards in ascending slot
order, and ports in ascending PCI bus/device/function order breadth-first. However, this policy does not work if your PCI devices
are hot-plugged or hot-pluggable, including the virtual functions on an SR-IOV device. In a hot-plug scenario, each separate udev
instance will be invoked in parallel, while the device tree is still being populated with new devices. Each udev instance will see
a different PCI tree, and thus cannot provide consistent enumeration. Use of this policy should be limited to only scenarios where
all PCI devices are present at boot (cold-plug).
EXIT CODES
Returns 0 on success, with BIOS-suggested name printed to stdout.
Returns 1 on provided device name lookup failure.
Returns 2 if system BIOS does not provide naming information. biosdevname requires system BIOS to provide naming information, either via
SMBIOS or sysfs files.
Returns 3 if not run as root but requires root privileges.
Returns 4 if running in a virtual machine.
SEE ALSO
http://linux.dell.com/wiki/index.php/Oss/libnetdevname
http://linux.dell.com/files/biosdevname/
git://linux.dell.com/biosdevname.git
RELATED PROGRAMS
The dmidecode package contains two tools useful for debugging BIOS features that biosdevname uses, specifically dmidecode to read the
SMBIOS Type 9 and Type 41 tables, and biosdecode to read the PCI IRQ Routing Table. Please include the output of each of these programs in
any bug reports.
AUTHOR
biosdevname was written by Matt Domsch <Matt_Domsch@dell.com>
This manual page was written by Rudy Gevaert <Rudy.Gevaert@UGent.be>, for the Debian project (but may be used by others).
Nov 28, 2010 BIOSDEVNAME(1)