Hi,
I'm a new user of this forum and I'm not an expert of linux.
I have a broken old pc with red hat linux, I clone hdd to another pc with different mainboard and it's ok but it has only one problem, the usb ports not work.
In the boot this message appears:
In Internet I found this command but I do not know what it means:
Someone can help me?
Thanks
Hi,
i have to make an excect physical copie of a sun unix station harddisk.
I have to make all partitions the same on about 60 harddisks, and also they should contain the same data/info.
I have hade a look at commands 'DD' and 'UFSDUMP' but both of them are not sufficient enough.
Can... (5 Replies)
Disk cloning
I had an external SCSI master disk that I used to clone to an identical external SCSI disk because the other SCSI disk would become corrupted. My original Master became corrupted so I used one of the other to good disk to copy back to the master. Unfortunately the new master needs... (1 Reply)
I have a Sun Solaris 9 and I would like to clone the Operating System from a sun4u Sun Fire 480R machine to a Sun Fire 280R machine. The disk is the same size, the 480R has no space disk slot to the 280R disk for mirrioring, i have no external disk, I am not allowed to take the machine down.
... (1 Reply)
I've got two drives in the same Sun server and I've been cloning the boot drive to the secondary drive by using both ufsdump/ufsrestore and the dd command sucessfully.
When I try and boot the cloned drive I get the following error:
WARNING - /usr/sbin/fsck not found. Most likely the mount... (10 Replies)
Hello;
Please,I did the clone on virtualBox, but the machines have the same IP address: eth2 Link encap: Ethernet HWaddr 8:00:27: f0: 92:19 inet addr: 192.168.1.4 Bcast: 192.168.1.255 Mask: 255.255.255.0
how to change the address please?
Thank you so much (6 Replies)
the following command will give me software ID from HP machine with hpux10.2:
>uname -a
HP-UX bmd350 B.10.20 D 9000/831 2011043966 64-user license
The string 2011043966 is the actual software ID which is used as number to license software.
Now my machine breaks down and I would like to... (1 Reply)
Hi,
I am having a text file with the following contents
###########
File1
###########
some
page1.txt
text
page.txt
When I sort this file on Red Hat 5, then I get the following output
###########
File1
###########
page1.txt
page.txt
some (3 Replies)
Hello,
Iam trying to clone AS IS two mounts like below
/class_test/sa
/class_dev/fd
from one server onto another.
I want to use tar and gzip to compress. Please let me know the options I have to use.
Also I want to untar it in the destination server, so let me know how to do... (3 Replies)
What is the best method to use to clone a Redhat machine, to ensure all software and config can be easily installed on new hardware?
Thank you! (3 Replies)
Hello all,
I am trying to clone an entire aix 5.3 machine , not sure on the procedure.Can anyone help on what can be done ?Thanks (9 Replies)
Discussion started by: gull05
9 Replies
LEARN ABOUT CENTOS
uftdi
UFTDI(4) BSD Kernel Interfaces Manual UFTDI(4)NAME
uftdi -- USB support for serial adapters based on the FT8U100AX and FT8U232AM chips
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device uftdi
device ucom
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
uftdi_load="YES"
DESCRIPTION
The uftdi driver provides support for various serial adapters based on the FTDI FT2232C, FT8U100AX and FT8U232AM chips.
The device is accessed through the ucom(4) driver which makes it behave like a tty(4).
HARDWARE
The uftdi driver supports the following adapters:
o B&B Electronics USB->RS422/485 adapter
o Elexol USB MOD1 and USB MOD3
o HP USB-Serial adapter shipped with some HP laptops
o Inland UAS111
o QVS USC-1000
o Buffalo PC-OP-RS / Kurouto-shikou KURO-RS universal remote
o Prologix GPIB-USB Controller
SEE ALSO tty(4), ucom(4), usb(4)HISTORY
The uftdi driver appeared in FreeBSD 4.8 from NetBSD 1.5.
BSD November 22, 2006 BSD