Hi,
I'm a new user of this forum and I'm not an expert of linux.
I have a broken old pc with red hat linux, I clone hdd to another pc with different mainboard and it's ok but it has only one problem, the usb ports not work.
In the boot this message appears:
In Internet I found this command but I do not know what it means:
Code:
[root@localhost root]# lspci -v | grep HCI
00:1d.0 USB Controller: Intel Corp. 82801EB USB (Hub #1) (rev 02) (prog-if 00 [UHCI])
00:1d.1 USB Controller: Intel Corp. 82801EB USB (Hub #2) (rev 02) (prog-if 00 [UHCI])
00:1d.2 USB Controller: Intel Corp. 82801EB USB (Hub #3) (rev 02) (prog-if 00 [UHCI])
00:1d.3 USB Controller: Intel Corp. 82801EB USB EHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
00:1d.7 USB Controller: Intel Corp. 82801EB USB EHCI Controller (rev 02) (prog-if 20 [EHCI])
Hi,
i have to make an excect physical copie of a sun unix station harddisk.
I have to make all partitions the same on about 60 harddisks, and also they should contain the same data/info.
I have hade a look at commands 'DD' and 'UFSDUMP' but both of them are not sufficient enough.
Can... (5 Replies)
Disk cloning
I had an external SCSI master disk that I used to clone to an identical external SCSI disk because the other SCSI disk would become corrupted. My original Master became corrupted so I used one of the other to good disk to copy back to the master. Unfortunately the new master needs... (1 Reply)
I have a Sun Solaris 9 and I would like to clone the Operating System from a sun4u Sun Fire 480R machine to a Sun Fire 280R machine. The disk is the same size, the 480R has no space disk slot to the 280R disk for mirrioring, i have no external disk, I am not allowed to take the machine down.
... (1 Reply)
I've got two drives in the same Sun server and I've been cloning the boot drive to the secondary drive by using both ufsdump/ufsrestore and the dd command sucessfully.
When I try and boot the cloned drive I get the following error:
WARNING - /usr/sbin/fsck not found. Most likely the mount... (10 Replies)
Hello;
Please,I did the clone on virtualBox, but the machines have the same IP address: eth2 Link encap: Ethernet HWaddr 8:00:27: f0: 92:19 inet addr: 192.168.1.4 Bcast: 192.168.1.255 Mask: 255.255.255.0
how to change the address please?
Thank you so much (6 Replies)
the following command will give me software ID from HP machine with hpux10.2:
>uname -a
HP-UX bmd350 B.10.20 D 9000/831 2011043966 64-user license
The string 2011043966 is the actual software ID which is used as number to license software.
Now my machine breaks down and I would like to... (1 Reply)
Hi,
I am having a text file with the following contents
###########
File1
###########
some
page1.txt
text
page.txt
When I sort this file on Red Hat 5, then I get the following output
###########
File1
###########
page1.txt
page.txt
some (3 Replies)
Hello,
Iam trying to clone AS IS two mounts like below
/class_test/sa
/class_dev/fd
from one server onto another.
I want to use tar and gzip to compress. Please let me know the options I have to use.
Also I want to untar it in the destination server, so let me know how to do... (3 Replies)
What is the best method to use to clone a Redhat machine, to ensure all software and config can be easily installed on new hardware?
Thank you! (3 Replies)
Hello all,
I am trying to clone an entire aix 5.3 machine , not sure on the procedure.Can anyone help on what can be done ?Thanks (9 Replies)
Discussion started by: gull05
9 Replies
LEARN ABOUT DEBIAN
iir
IIR(4) BSD Kernel Interfaces Manual IIR(4)NAME
iir -- Intel Integrated RAID controller and ICP Vortex driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device pci
device scbus
device iir
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
iir_load="YES"
DESCRIPTION
The iir driver claims to interface with the Intel integrated RAID controller cards, and all versions of the ICP Vortex controllers (including
FC).
HARDWARE
Controllers supported by the iir driver include:
o Intel RAID Controller SRCMR
o Intel Server RAID Controller U3-l (SRCU31a)
o Intel Server RAID Controller U3-1L (SRCU31La)
o Intel Server RAID Controller U3-2 (SRCU32)
o All past and future releases of Intel and ICP RAID Controllers.
o Intel RAID Controller SRCU21 (discontinued)
o Intel RAID Controller SRCU31 (older revision, not compatible)
o Intel RAID Controller SRCU31L (older revision, not compatible)
The SRCU31 and SRCU31L can be updated via a firmware update available from Intel.
SEE ALSO cam(4), pass(4), xpt(4), camcontrol(8)AUTHORS
The iir driver is supported and maintained by Achim Leubner <Achim_Leubner@adaptec.com>.
This manual page was written by Tom Rhodes <trhodes@FreeBSD.org> and is based on information supplied by the driver authors and the website
of Mike Smith <msmith@FreeBSD.org>.
BSD August 8, 2004 BSD
12-17-2013
Clone redhat to another PC
