Seems like I'm wrong and Solaris 11 has a new way of configuring zone network interfaces.
What hardware is this?
Thank you, I will look through these links.
The hardware is a SPARC T3-1 with one ethernet cable plugged into the back. The global zone is an LDom running on the host machine. My host machine, global zone and local zone all have IPs on the same subnet.
I am seeking help from the gurus in this forum and hope that I can find answers soon. Anyone who provide the answers will be greatly appreciated.
I have a sparc box with Solaris 10 on it. We install Solaris with zone structure. One global zone and two other zone. I installed Oracle DB on global... (6 Replies)
Hi Everyone,
I have installed open solaris 10 on one of the x86 machines available but inspite of configuring the IP i am unable to access the machine through the network.
Can anyone please help me wih the settings required to access the machine across the network.Its really Urg..Any help is... (13 Replies)
Hi
i have created a solaris zone but have not yet connected any network cables for this new zone,
can i set the zone up without running the command 'add net' and not adding an ip or physical interface?
i tried to add dummy internet settings and get this
zonecfg:coddr> add net... (4 Replies)
I am trying to use a serial communications device that is connected to /dev/ttyb on a netra 240 server. This is a solaris zone configuration using solaris 10 0910. I am able to access /dev/ttyb from the global zone but not throught he non-global zone. I have enabled all of the tty devices in my... (0 Replies)
I am trying to create a branded 10 zone on a Solaris 11.1 control domain. I am using a flar image (cpio) from an existing LDOM. Here are the steps taken after flarcreate.
#zonecfg -z <device>
>create -b
>set brand=solaris10
>set zonepath=/zonez/<device>
>set ip-type=exclusive
>add net... (1 Reply)
Dear all,
recently, I migrated a solaris zone from one host to another. The zone was inside of a zpool. The zpool cotains two volumes.
I did the following:
host1:
$ zlogin zone1 shutdown -y -g0 -i0 #Zone status changes from running to installed
$ zpool export zone1
host2:
$ zpool... (2 Replies)
Have 2 nics on physical system
net0 phys 1500 up --
net1 phys 1500 up --
1. I want to create a link aggregation with LACP enabled with above 2 nics
2. Create port-group(Like we create on ESXi) with VLAN-ID 2141
3. And assign this... (0 Replies)
I am planning to do solaris 11 global zone patching having solaris 10 branded zone. I have a doubts on step 8 specially
Can someone clear my step 8 doubts or if anything wrong between step 1 to step 9 please correct that also as I have pretty good idea about Step 10 mean patching in solaris 10... (2 Replies)
Hi,
I have a Solaris 10 zone which I need to configure on a new network. I have configured the new IP on the zone itself and I can ping the interface from a node on the same network, but not from another network. Basically I need to know how to route the traffic from the zone to it's... (3 Replies)
Hi, hoping someone can help, its been a while since I used Solaris.
After creating a NGZ (non global zone), the NGZ can access the GZ (Global Zone) and the GZ can access the NGZ (using ssh, zlogin)
However, the NGZ cannot access any other netwqork devices, it can't even see the default router
... (2 Replies)
Discussion started by: GazinLincoln
2 Replies
LEARN ABOUT OPENSOLARIS
brands
brands(5) Standards, Environments, and Macros brands(5)NAME
brands - alternate operating environments for non-global zones
DESCRIPTION
The branded zone (BrandZ) framework extends the Solaris Zones infrastructure described in zones(5) to include the creation of brands, which
provide non-global zones that contain non-native operating environments.
The term "brand" can refer to a wide range of operating environments. All brand management is performed as extensions to the current zones
structure.
Every zone is configured with an associated brand. The brand type is used to determine which scripts are executed when a zone is installed
and booted. In addition, a zone's brand is used to properly identify the correct application type at application launch time. The default
is the native brand.
A branded zone will support exactly one brand of non-native binary, which means that a branded zone provides a single operating environ-
ment. Once a zone has been assigned a brand, that brand cannot be changed or removed.
BrandZ extends the zones tools in the following ways:
o A brand is an attribute of a zone, set at zone create time.
o The zonecfg tool (see zonecfg(1M)) is used to set a zone's brand type and configure the zone.
o The zoneadm tool (see zoneadm(1M)) is used to report a zone's brand type and administer the zone.
Device Support
The devices supported by each zone are documented in the man pages and other documentation for that brand. The zones infrastructure detects
any attempt to add an unsupported device and issues a warning to the administrator. If the administrator chooses to add an unsupported
device despite that warning, that device might or might not work as expected. The configuration will be untested and unsupported.
ATTRIBUTES
See attributes(5) for a description of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWzoneu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
SEE ALSO mdb(1), zlogin(1), zonename(1), dtrace(1M), in.rlogind(1M), sshd(1M), zoneadm(1M), zonecfg(1M), kill(2), priocntl(2), getzoneid(3C),
ucred_get(3C), getzoneid(3C), proc(4), attributes(5), lx(5), native(5), privileges(5), zones(5), lx_systrace(7D), crgetzoneid(9F)SunOS 5.11 13 Feb 2009 brands(5)