Sponsored Content
Operating Systems SCO SCO 6.0.0 hangsat install cdrom verify Post 302879309 by jgt on Wednesday 11th of December 2013 06:44:11 PM
Old 12-11-2013
You will probably have better luck with the SATA cd-rom. There is an issue with USB devices if there is more than 4gb of memory in the system
Have you set the SATA ports as IDE, or AHCI.
Is the cdrom attached to the RAID controller, or the typical ide sata port?
 

10 More Discussions You Might Find Interesting

1. SCO

sco openserver 5.0.2 cdrom

Hello!!!! Salut!!!! I m looking for sco openserver 5.0.2 package to install it on my compaq server prosignia 200. I don't fount it on our local market. Is it possible to me to download it from the net??? Je suis à la recherche de SCO OPENSERVER 5.0.2 pour son installation (requise) sur mon... (2 Replies)
Discussion started by: azeklousaid
2 Replies

2. SCO

sco backup using CDROM

I've installed a CD-RW rom using SCO OSR 5.0.7, but I cannot open the dev to perform backup (6 Replies)
Discussion started by: tsc_hk
6 Replies

3. Solaris

"boot cdrom - install" is not possible

Hi all, I've this problem: I want to install Solaris 10 on Sun Enterprise 450 but when I type "boot cdrom - install" command from OK PROMPT I read this message. "Can't open input device". I attempt to change "cdrom" with its "alias", after to have typing "devalias" command, but nothing! ... (6 Replies)
Discussion started by: Sunb3
6 Replies

4. SCO

SCO Backups and Verify Log

Hi, I am after using TAR to backup to tape in SCO 5 but i want to produce a log that tells me that the backup has been successful. Any Suggestions (1 Reply)
Discussion started by: jfd7000
1 Replies

5. Solaris

x86 Install stops with a /cdrom error

Hi, I have a DVD burned iso image of Solaris 10 for x86 and trying to install it on an PowerSpec PC with 2 - DVD drives. The DVD image won't boot from the top DVD drive so I put it in the second one and it boots. The installation gets to the following prompt: "You may need to manually eject the... (2 Replies)
Discussion started by: rpollard001
2 Replies

6. Solaris

Boot cdrom - install

Hi community, Does anyone can tell me the difference between "boot cdrom" and "boot cdrom - install" ? Thank you very much:D (3 Replies)
Discussion started by: Sunb3
3 Replies

7. Linux

How to install linux in a system without cdrom, usb boot, floppy, other OS?

Hello to everyone, I am new to linux and I want to move to this system after bad experiences with windows. I have also a particular problem. An old laptop is probably able to handle just linux at this point of its life. The cdrom is gone, the bios doesn't have usb boot support, there is no... (6 Replies)
Discussion started by: highkftj
6 Replies

8. SCO

Install Hang OpenServer 6 - SATA CDROM

Hi all Can anybody offer any help with installing Openserver 6 on a Supermicro server? I am familiar with installing OS5, but this is my first time with v6. The PC is fitted with Supermicro X8DTL-I Dual Xeon motherboard and 2 Xeon E5620 processors, and 16Gb Ram, LSI MegaRaid SAS8708 8 port... (11 Replies)
Discussion started by: millosman
11 Replies

9. SCO

Getting error sco unix 507 from cdrom:no controller for device you chosen

Installing SCO UNIX 507 on Dell Poweredge T610. It has no floppy so I downloaded the BTLD onto CD from SCO site to load without floppy drive. BTLD loads ok. when i get to the Media to be used, no matter what option i chose i get the error: No controller for device you have chosen. During bootup you... (9 Replies)
Discussion started by: romanglad112
9 Replies

10. Solaris

HOW TO INSTALL os from cdrom from console?

Hi all, I need to do installation via console , a image is stored in cdrom. The OS is Sun Solaris , Please tell me how to go about it. I just need to know the first command and thereafter. Please advise. Thanks Manali (5 Replies)
Discussion started by: manalisharmabe
5 Replies
MPT(4)							   BSD Kernel Interfaces Manual 						    MPT(4)

NAME
mpt -- LSI Fusion-MPT SCSI/Fibre Channel driver SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file: device scbus device mpt Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): mpt_load="YES" DESCRIPTION
The mpt driver provides support for the LSI Logic Fusion-MPT family of SCSI, Fibre Channel and SAS controllers. HARDWARE
The following controllers are supported by the mpt driver: o LSI Logic 53c1030, LSI Logic LSI2x320-X (Single and Dual Ultra320 SCSI) o LSI Logic AS1064, LSI Logic AS1068 (SAS/SATA) o LSI Logic FC909 (1Gb/s Fibre Channel) o LSI Logic FC909A (Dual 1Gb/s Fibre Channel) o LSI Logic FC919, LSI Logic 7102XP-LC (Single 2Gb/s Fibre Channel) o LSI Logic FC929, LSI Logic FC929X, LSI Logic 7202XP-LC (Dual 2Gb/s Fibre Channel) o LSI Logic FC949X (Dual 4Gb/s Fibre Channel) o LSI Logic FC949E, LSI Logic FC949ES (Dual 4Gb/s Fibre Channel PCI-Express) The Ultra 320 SCSI controller chips supported by the mpt driver can be found onboard on many systems including: o Dell PowerEdge 1750 thru 2850 o IBM eServer xSeries 335 These systems also contain Integrated Raid Mirroring and Integrated Raid Mirroring Enhanced which this driver also supports. The SAS controller chips are also present on many new AMD/Opteron based systems, like the Sun 4100. Note that this controller can drive both SAS and SATA drives or a mix of them at the same time. The Integrated Raid Mirroring available for these controllers is poorly supported at best. The Fibre Channel controller chipset are supported by a broad variety of speeds and systems. The Apple Fibre Channel HBA is in fact the FC949ES card. This driver also supports target mode for Fibre Channel cards. This support may be enabled by setting the desired role of the core via the LSI Logic firmware utility that establishes what roles the card can take on - no separate compilation is required. SEE ALSO
cd(4), ch(4), da(4), pci(4), sa(4), scsi(4), targ(4), mptutil(8), gmultipath(8) LSI Logic Website, http://www.lsilogic.com/. HISTORY
The mpt driver first appeared in FreeBSD 4.6. AUTHORS
The mpt driver was originally written for FreeBSD by Greg Ansley and marginally improved upon by Matt Jacob <mjacob@FreeBSD.org>. Justin Gibbs <gibbs@FreeBSD.org> and Scott Long <scottl@FreeBSD.org> have made more substantial improvements. BUGS
BSD
May 13, 2010 BSD
All times are GMT -4. The time now is 10:20 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy