12-11-2013
SCO 6.0.0 hangsat install cdrom verify
Installing SCO 6.0.0 on a Supermico server. Has an LSI 9240-8i MegaRaid SAS controller using the megasas drivers. Created a driver diskette and it loads the drivers in first part of install OK. When all drivers are loaded it starts the installation process and it hangs with the "... verify (cdrom)" message. I'm stuck. I have used a SATA DVD drive and I'm now using a USB DVD drive. Both stop at same point. Anyone have an idea?
10 More Discussions You Might Find Interesting
1. SCO
Hello!!!! Salut!!!!
I m looking for sco openserver 5.0.2 package to install it on my compaq server prosignia 200. I don't fount it on our local market.
Is it possible to me to download it from the net???
Je suis à la recherche de SCO OPENSERVER 5.0.2 pour son installation (requise) sur mon... (2 Replies)
Discussion started by: azeklousaid
2 Replies
2. SCO
I've installed a CD-RW rom using SCO OSR 5.0.7, but I cannot open the dev to perform backup (6 Replies)
Discussion started by: tsc_hk
6 Replies
3. Solaris
Hi all,
I've this problem:
I want to install Solaris 10 on Sun Enterprise 450 but when I type "boot cdrom - install" command from OK PROMPT I read this message.
"Can't open input device". I attempt to change "cdrom" with its "alias", after to have typing "devalias" command, but nothing!
... (6 Replies)
Discussion started by: Sunb3
6 Replies
4. SCO
Hi,
I am after using TAR to backup to tape in SCO 5 but i want to produce a log that tells me that the backup has been successful.
Any Suggestions (1 Reply)
Discussion started by: jfd7000
1 Replies
5. Solaris
Hi,
I have a DVD burned iso image of Solaris 10 for x86 and trying to install it on an PowerSpec PC with 2 - DVD drives. The DVD image won't boot from the top DVD drive so I put it in the second one and it boots. The installation gets to the following prompt:
"You may need to manually eject the... (2 Replies)
Discussion started by: rpollard001
2 Replies
6. Solaris
Hi community,
Does anyone can tell me the difference between "boot cdrom" and "boot cdrom - install" ?
Thank you very much:D (3 Replies)
Discussion started by: Sunb3
3 Replies
7. Linux
Hello to everyone,
I am new to linux and I want to move to this system after bad experiences with windows.
I have also a particular problem. An old laptop is probably able to handle just linux at this point of its life.
The cdrom is gone, the bios doesn't have usb boot support, there is no... (6 Replies)
Discussion started by: highkftj
6 Replies
8. SCO
Hi all
Can anybody offer any help with installing Openserver 6 on a Supermicro server?
I am familiar with installing OS5, but this is my first time with v6.
The PC is fitted with Supermicro X8DTL-I Dual Xeon motherboard and 2 Xeon E5620 processors, and 16Gb Ram, LSI MegaRaid SAS8708 8 port... (11 Replies)
Discussion started by: millosman
11 Replies
9. SCO
Installing SCO UNIX 507 on Dell Poweredge T610. It has no floppy so I downloaded the BTLD onto CD from SCO site to load without floppy drive. BTLD loads ok. when i get to the Media to be used, no matter what option i chose i get the error: No controller for device you have chosen. During bootup you... (9 Replies)
Discussion started by: romanglad112
9 Replies
10. Solaris
Hi all,
I need to do installation via console , a image is stored in cdrom.
The OS is Sun Solaris ,
Please tell me how to go about it.
I just need to know the first command and thereafter.
Please advise.
Thanks Manali (5 Replies)
Discussion started by: manalisharmabe
5 Replies
TWS(4) BSD Kernel Interfaces Manual TWS(4)
NAME
tws -- 3ware 9750 SATA+SAS 6Gb/s RAID controller card driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device scbus
device tws
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
tws_load="YES"
DESCRIPTION
The tws driver provides support for LSI's 3ware 9750 SATA+SAS 6Gb/s RAID controller cards.
These controllers feature the LSISAS2108 6Gb/s SAS RAID-on-Chip (ROC) and are available in 4- and 8-port configurations, supports RAID levels
0, 1, 5, 6, 10, 50 and single disk, with 96 SATA and/or SAS hard drives and SSDs.
For further hardware information, see http://www.lsi.com/.
HARDWARE
The tws driver supports the following SATA/SAS RAID controller:
o LSI's 3ware SAS 9750 series
LOADER TUNABLES
Tunables can be set at the loader(8) prompt before booting the kernel or stored in loader.conf(5).
hw.tws.cam_depth The maximum queued CAM SIM requests for one controller. The default value is 256.
hw.tws.enable_msi This tunable enables MSI support on the controller if set to a non-zero value. The default value is 0.
hw.tws.queue_depth The maximum queued requests for one controller.
hw.tws.use_32bit_sgls Limit the driver to use only 32-bit SG elements regardless whether the operating system is running in 64-bit mode.
The default value is 0.
FILES
/dev/da? array/logical disk interface
/dev/tws? management interface
DIAGNOSTICS
Whenever the driver encounters a command failure, it prints out an error code in the format: "ERROR: (<error source>: <error code>):", fol-
lowed by a text description of the error. There are other error messages and warnings that the driver prints out, depending on the kinds of
errors that it encounters. If the driver is compiled with TWS_DEBUG defined, it prints out a whole bunch of debug messages.
SEE ALSO
da(4), scsi(4)
AUTHORS
The tws driver was written by Manjunath Ranganathaiah for LSI and this manual page was written by Xin LI <delphij@FreeBSD.org> for iXsystems,
Inc.
BSD
October 4, 2011 BSD