12-10-2013
How do you access the console output? You might have a "lock" on the console from another terminal... If you are on the ALOM try to start the console with console -f and hit enter after the output stops.
I do not agree with hicksd8 that the output you see is (mainly) from the ALOM... So if you connecting to the console over serial port, you might want to try the ALOM and vice versa.
9 More Discussions You Might Find Interesting
1. Solaris
We had to replace a hard drive in one of our Sun Blade 150s, but now it hangs during the Jumpstart. It will show 1 or 2 Timeout for ARP/RARP messages and then start the spinning numbers. It always stops at 2ae00 and just hangs there.
We have 1 combined jumpstart server and it is also our NIS+... (5 Replies)
Discussion started by: stottsja
5 Replies
2. Solaris
Hi,
I have a brand new SUN T5140 machine. I am trying to install Solaris 10 on the box. When I go to the machine using a KVM session I can see a blank screen , how can I get to the OK prompt to start the installation.
Thanks,
Suresh (10 Replies)
Discussion started by: gunnervarma
10 Replies
3. Solaris
Hi all,
I have just replaced the HDD on a Ultra 5 Spark machine, now I need to reinstall Solaris 9.
The problem is: how do I get to the OK prompt without a Sun keyboard in order to boot from CD?
At moment when I power on the machine I get the following error:
Timeout Waiting for ARP/RARP... (13 Replies)
Discussion started by: sspirito
13 Replies
4. Solaris
Hi, I've got an issue here: After I logon to the xscf prompt of this Sun M5000 and did 'XSCF> version -c xcp', the xscf prompt disappeared. I can't get it back and can't log out.
exit
rebootxscf
logout
#.
#>
#>
~#
~#
exit
sendbreak
exit
I tried to set the Mode Switch to the service... (3 Replies)
Discussion started by: aixlover
3 Replies
5. Solaris
This is what is displayed on the screen as the system tries to boot and then hangs:
0>Test CPU(s)....Done
0>Interrupt Crosscall....|
SC Alert: DHCP negotiation failed, perhaps misconfigured or no DHCP server avail
able
Done
0>Init Memory....|
SC Alert: Host System has Reset
'Done
0>PLL... (2 Replies)
Discussion started by: kenosongo
2 Replies
6. Solaris
Hi Guys,
I have a small problem with a v445 which I have been informed will only boot with the reconfigure option enabled.
It is attached to HP SAN storage using qla2300 FCA's with a Veritas encapsulated rootvoldg (No Laughing here please) when I try a reboot I get the following error.
... (5 Replies)
Discussion started by: gull04
5 Replies
7. Solaris
Hi,
on sunfire v890 unable to move from rsc prompt to ok prompt, i have executed the command break. (9 Replies)
Discussion started by: manoj.solaris
9 Replies
8. Solaris
Hello,
I'm quite new to Unix but I've got an old Sun v445 server that was previously used as a backup database server, these have since been moved to new hardware. The old admin who configured the box has since retired and left no notes about it, so i have no idea what the root password is and... (2 Replies)
Discussion started by: dbajtr
2 Replies
9. Solaris
I have a SunFire V445 running Solaris 10 and am adding a Sun DLT tape drive. From the OK prompt the probe-scsi-all does see the drive and it is the proper target of 4. When I do the boot -- -r it does build the /dev/rmt directories correctly and the links to /devices appear correct as well. When I... (8 Replies)
Discussion started by: chastings
8 Replies
LEARN ABOUT OPENDARWIN
sysmsg
sysmsg(7D) Devices sysmsg(7D)
NAME
sysmsg - system message routing to console devices
SYNOPSIS
/dev/sysmsg
DESCRIPTION
The file /dev/sysmsg routes output to a variable set of console devices. Writes to /dev/sysmsg are always directed to the system console
/dev/console, and are in addition directed to a set of auxiliary console devices managed by consadm(1M).
Only root has permission to write to this device.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsr |
+-----------------------------+-----------------------------+
|Interface Stability |Stable |
+-----------------------------+-----------------------------+
SEE ALSO
consadm(1M), syslogd(1M) , attributes(5), console(7D)
SunOS 5.10 13 Oct 1998 sysmsg(7D)