Execution of local commands for remote site. Post: 302877771

10 More Discussions You Might Find Interesting

1. Windows & DOS: Issues & Discussions

mapping FTP site as local drive

I have a small problem, there is one Win98 PC on our network, and I would like to map the FTP server that we have as one of the Win98's machine's local drives. I am by no means a Windows expert, instead my area is *NIX. The webserver is just a regualar webserver, within the LAN. I tried...

2. SCO

Openserver 5.0.4 can't be ping or telnet into from a remote site

Hi, Can anybody help me out why l can't not ping my server with Openserver 5.0.4 with my windows machine from a remote site. The machine could see the local LAN with the Router however, i can't ping or telnet unto the server from another site on the WAN. The default gateway was configure on the...

3. UNIX for Advanced & Expert Users

Commands to copy a tar.gz file from a Remote Unix Server to Local Desktop.

Hi, Just wanted to know, how can I ftp/transfer/copy a (design.tar.gz) archive from a Unix Server (sdmc222.sdmc.cp-srv.com) which is at a remote location, to my Windows Desktop. Obviously, it is not possible at cmd prompt on my Windows using the following commands :- ftp...

4. Shell Programming and Scripting

Can BASH execute commands on a remote server when the commands are embedded in shell

I want to log into a remote server transfer over a new config and then backup the existing config, replace with the new config. I am not sure if I can do this with BASH scripting. I have set up password less login by adding my public key to authorized_keys file, it works. I am a little...

5. Web Development

Creating a blog site on a local computer

Hello! I would like to create a blog website on a web domain of mine. The blog will be used for publishing economics-lated articles. I tried to use a few open source packages for blog creation (WorldPress, b2evolution, Movable type) which I wanted to test on a local computer before arranging...

6. HP-UX

configuring site-local IPv6 address

How do I configure site-local IPv6 address in HP-UX box? I can get link local IPv6 address automatically when I put IPv6 up. aps39-88-root# ifconfig lan0 inet6 up

7. Solaris

Remote execution of a local script on multiple servers

So I have a scriptlet called solaris_command: for i in \ server1 server2 server3 do echo $i ssh $i $1 echo "" done I then use that as a command in multiple scripts to allow for data gathering for all virtual hosts in the environment thusly: solaris_command "cat...

8. Shell Programming and Scripting

To run a local shell script in a remote machine by passing arguments to the local shell script

I need to run a local shell script on a remote machine. I am able to achieve that by executing the command > ssh -qtt user@host < test.sh However, when I try to pass arguments to test.sh it fails. Any pointers would be appreciated.

9. Shell Programming and Scripting

Pause processes in remote host and resume execution in another remote host

Hi, Given addresses of 2 remote machines, using a shell script is it possible to get the state of running processes in "src" stop all the processes in "src" exit out of "src" ssh into "dest" resume the state of executing processes captured in step 1 in "dest" Assumption: "src" is...

10. Shell Programming and Scripting

Copy from local to remote

Hi I need a advice for writing simple bash script, I have a file pod.txt which contains source location and remote location: /mnt/infile/20141103/701_0001.png/remote/tmp/pk21730/p0330223723074.png /mnt/infile/20141103/203_0001.png/remote/tmp/pk21731/p0330223723081.png and I must copy ...

LEARN ABOUT DEBIAN

mkfs.bfs

MKFS.BFS(8)						       System Administration						       MKFS.BFS(8)

NAME

       mkfs.bfs - make an SCO bfs filesystem

SYNOPSIS

       mkfs.bfs [options] device [block-count]

DESCRIPTION

       mkfs.bfs creates an SCO bfs filesystem on a block device (usually a disk partition or a file accessed via the loop device).

       The block-count parameter is the desired size of the filesystem, in blocks.  If nothing is specified, the entire partition will be used.

OPTIONS

       -N, --inodes number
	      Specify  the  desired  number  of  inodes (at most 512).	If nothing is specified, some default number in the range 48-512 is picked
	      depending on the size of the partition.

       -V, --vname label
	      Specify the volume label.  I have no idea if/where this is used.

       -F, --fname name
	      Specify the filesystem name.  I have no idea if/where this is used.

       -v, --verbose
	      Explain what is being done.

       -c     This option is silently ignored.

       -l     This option is silently ignored.

       -h, --help
	      Display help text and exit.

       -V, --version
	      Output version information and exit.  Option -V only works as --version when it is the only option.

EXIT CODES

       The exit code returned by mkfs.bfs is 0 when all went well, and 1 when something went wrong.

SEE ALSO

       mkfs(8).

AVAILABILITY

       The mkfs.bfs command is part of the util-linux package and is available from ftp://ftp.kernel.org/pub/linux/utils/util-linux/.

util-linux							     July 2011							       MKFS.BFS(8)

10 More Discussions You Might Find Interesting

1. Windows & DOS: Issues & Discussions

mapping FTP site as local drive

Discussion started by: cerberusofhate

2. SCO

Openserver 5.0.4 can't be ping or telnet into from a remote site

Discussion started by: kayode

3. UNIX for Advanced & Expert Users

Commands to copy a tar.gz file from a Remote Unix Server to Local Desktop.

Discussion started by: marconi

4. Shell Programming and Scripting

Can BASH execute commands on a remote server when the commands are embedded in shell

Discussion started by: bash_in_my_head