Hello.
System is a HP Visualize C3600 running X11 and after a power failure machine will not boot (see error messages below)
From what I've read, this may be caused by a corrupted etc/inittab file. Solution suggested on other websites is to boot in single user mode and edit file inittab... (2 Replies)
Hi all
I used a dual boot operating system and it works fine for me. Now , i install a Ati radeon 9250 Agp card on my system and this results in boot failure of fedora 6. The graphics card is working fine with windows XP , i.e i have no compatibility issues.The system also refuses to boot when i... (2 Replies)
I installed solaris virtually and tried to format the partitions .. I dont know what went wrong, It got rebooted and hangs in the screen "No partitions" and after pressing Enter button it goes to "INT18 boot failure" and hangs there once again . Could any one of you suggest why this has happened... (3 Replies)
I have installed Solaris 10 OS in Sun Virtual Box that uses x86 32 bit system. After an abnormal shutdown i'm getting the following message on the console when i try to boot.
SunOS Release 5.10 Version Generic_127128_11 32-bit
Copyright 1983-200 Sun Microsystems, Inc. All rights reserrved.
Use... (3 Replies)
hi
SCO Unix 5.0.6 doesn't boot due to this problem:
not a directory
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot
Knows someone howto solve it? (16 Replies)
I'm trying to run clusterKnoppix live cd from a couple machines but it only works from one computer. The other three, my toshiba laptop, emachine, and hp machine can't find the filesystem.. the live cd stops booting and gives me a error saying it couldn't find knoppix filesystem and then gives me a... (0 Replies)
HPUX running in D-Class (L1000), pretty old HPUX version - hpux 11.00
Attempt 1 -- To boot from normal (primary)
Unable to boot - system complains failure
SYSTEM ALERT System Name : uninitialized DATE : 10/22/2011 Time : 03/41:12 Alert Level 15 = Fatal hardware or configuration... (12 Replies)
Hi Guys,
I have a small problem with a v445 which I have been informed will only boot with the reconfigure option enabled.
It is attached to HP SAN storage using qla2300 FCA's with a Veritas encapsulated rootvoldg (No Laughing here please) when I try a reboot I get the following error.
... (5 Replies)
hi power went out. next day unix sco wont boot up error code 303. any help appreciated as we are clueless. (11 Replies)
Discussion started by: fredthayer
11 Replies
LEARN ABOUT FREEBSD
nvmecontrol
NVMECONTROL(8) BSD System Manager's Manual NVMECONTROL(8)NAME
nvmecontrol -- NVM Express control utility
SYNOPSIS
nvmecontrol devlist
nvmecontrol identify [-v] [-x] <device id>
nvmecontrol perftest <-n num_threads> <-o read|write> [-p] <-s size_in_bytes> <-t time_in_sec> <namespace id>
nvmecontrol reset <controller id>
nvmecontrol logpage <-p page_id> [-x] <device id> <namespace id>
nvmecontrol firmware [-s slot] [-f path_to_firmware] [-a] <device id>
DESCRIPTION
NVM Express (NVMe) is a storage protocol standard, for SSDs and other high-speed storage devices over PCI Express.
EXAMPLES
nvmecontrol devlist
Display a list of NVMe controllers and namespaces along with their device nodes.
nvmecontrol identify nvme0
Display a human-readable summary of the nvme0 IDENTIFY_CONTROLLER data.
nvmecontrol identify -x -v nvme0ns1
Display a hexadecimal dump of the nvme0 IDENTIFY_NAMESPACE data for namespace 1.
nvmecontrol perftest -n 32 -o read -s 512 -t 30 nvme0ns1
Run a performance test on nvme0ns1 using 32 kernel threads for 30 seconds. Each thread will issue a single 512 byte read command. Results
are printed to stdout when 30 seconds expires.
nvmecontrol reset nvme0
Perform a controller-level reset of the nvme0 controller.
nvmecontrol logpage -p 1 nvme0
Display a human-readable summary of the nvme0 controller's Error Information Log. Log pages defined by the NVMe specification include Error
Information Log (ID=1), SMART/Health Information Log (ID=2), and Firmware Slot Log (ID=3).
nvmecontrol logpage -p 1 -x nvme0
Display a hexidecimal dump of the nvme0 controller's Error Information Log.
nvmecontrol firmware -s 2 -f /tmp/nvme_firmware nvme0
Download the firmware image contained in "/tmp/nvme_firmware" to slot 2 of the nvme0 controller, but do not activate the image.
nvmecontrol firmware -s 4 -a nvme0
Activate the firmware in slot 4 of the nvme0 controller on the next reset.
nvmecontrol firmware -s 7 -f /tmp/nvme_firmware -a nvme0
Download the firmware image contained in "/tmp/nvme_firmware" to slot 7 of the nvme0 controller and activate it on the next reset.
AUTHORS
nvmecontrol was developed by Intel and originally written by Jim Harris <jimharris@FreeBSD.org>.
This man page was written by Jim Harris <jimharris@FreeBSD.org>.
BSD March 26, 2013 BSD