How to specify a port with curl? Post: 302876078

9 More Discussions You Might Find Interesting

1. Solaris

luxadm -e port shows one port not connected

hi i have a sun machine which has one hba 2ports; out of which one port says it is not connected # luxadm -e port /devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED /devices/pci@1d,700000/SUNW,qlc@1,1/fp@0,0:devctl NOT CONNECTED but both...

2. IP Networking

SSH Port Forwarding - sharing the same port

Hi Linux/Unix Guru, I am setting Linux Hopping Station to another different servers. My current config to connect to another servers is using different port to connect. e.g ssh -D 1080 -p 22 username@server1.com ssh -D 1081 -p 22 username@server2.com Now what I would like to have...

3. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

4. IP Networking

telnet for port 5433 is not working while it works for port 22

Hi, I am trying to set up a dev environment and I have Ubuntu server (10.16.1.92) and a CentOS VM (10.16.3.235) on this. On the CentOS I have a program running on port 5433. Now my problem is that I am unable to telnet this port from another Windows server whereas I can telnet port 22 from...

5. IP Networking

Tcp ip port open but no such process (merged: Release A Port)

i want to kill a tcp connection by killing its pid with netstat -an i got the tcp ip connection on port 5914 but when i type ps -a or ps-e there is not such process running on port 5914 is it possible that because i do not log on with proper user account i can not see that process running?

6. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

7. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

8. Shell Programming and Scripting

Help Generate new port base on the last port but not in used by other application

Hi Expert, Anybody can figure it out on how to generate new port base on my last port let say my last port var1=124 and increment for new port 125,126 but this new two ports need to look at first if this port is not in used by any service, if the port is in used add 1 to new port and if in used...

9. UNIX for Beginners Questions & Answers

Bash script, find the next closed (not in use) port from some port range.

hi, i would like to create a bash script that check which port in my Linux server are closed (not in use) from a specific range, port range (3000-3010). the print output need to be only 1 port, and it will be nice if the output will be saved as a variable or in same file. my code is: ...

LEARN ABOUT DEBIAN

httppower

httppower(8)							     powerman							      httppower(8)

NAME

       httppower - communicate with HTTP based power distribution units

SYNOPSIS

       httppower [--url URL]

DESCRIPTION

       httppower  is  a  helper program for powerman which enables it to communicate with HTTP based power distribution units.	It is run interac-
       tively by the powerman daemon.

OPTIONS

       -u, --url URL
	      Set the base URL.

INTERACTIVE COMMANDS

       The following commands are accepted at the httppower> prompt:

       auth user:pass
	      Authenticate to the base URL with specified user and password, using ``basic'' HTTP authentication which sends the user and password
	      over the network in plain text.

       seturl URL
	      Set the base URL.  Overrides the command line option.

       get [URL-suffix]
	      Send an HTTP GET to the base URL with the optional URL-suffix appended.

       post [URL-suffix] key=val[&key=val]...
	      Send an HTTP POST to the base URL with the optional URL-suffix appended, and key-value pairs as argument.

FILES

       /usr/sbin/httppower
       /etc/powerman/powerman.conf

ORIGIN

       PowerMan was originally developed by Andrew Uselton on LLNL's Linux clusters.  This software is open source and distributed under the terms
       of the GNU GPL.

SEE ALSO

       powerman(1), powermand(8), httppower(8), plmpower(8), vpcd(8), powerman.conf(5), powerman.dev(5), powerman-devices(7).

       http://sourceforge.net/projects/powerman

powerman-2.3.5							    2009-02-09							      httppower(8)