... and then pulled it, then hdisk1 is empty if the reducevg completes.
It seems counter intuitive, but assuming that the two disks were completely mirrored and bootable, you would have been safer to shutdown, pull the disk, boot. That way, if you need to, you could have forced the boot via SMS to start from the disk you pulled out.
If hd5 is not on hdisk0, this would suggest that it was only on hdisk1. The unmirror will not move LVs that are not mirrored. This would mean that you could not take hdisk1 out the VG of course, so that would suggest that something was wrong at that point.
Before we panic too much. Are you happy that you have recent mksysb media to recover with?
Hi guys
I have joined a new department and one of my tasks is to investigate the feasibility of upgrading our current AIX v 4.3 to V5.3.
I do not know anything about AIX and any actual work will be done by an outside consultant until such time as I have built up my own knowledge.
The system we... (3 Replies)
Hello everyone, I have to do a ML upgrade on AIX 5.2 from 01 to 09
this is the first time iam going to do it.
are there any command i have to keep in mind??
thanks! (1 Reply)
I am having a strange problem with the poll() routine. I compiled a module under AIX 5.2 using the poll routine, it worked fine. When the OS was upgraded to AIX 5.3 the poll routine return an error code.
Here is a summary of the code:
#define MAX_EVENTS 300
long eventCount;... (0 Replies)
Hi Guys,
i'm having trouble changing the path-priority. Now both priorities are 1 as you can see in the lspath-output.
Any ideas why the chpath command fails?
# chpath -l hdisk3 -p fscsi1 -a priority=10
Method error (/etc/methods/chgdisk):
0514-080 Invalid routine argument... (4 Replies)
While executing tcpdump , i am getting following error.
tcpdump: BIOCSETIF: en0: Do not specify an existing file.
I checked with truss , and i able to see kioctl system is failed with "EEXIST"
==============================================
Message from truss output... (2 Replies)
Hello Folks,
i am facing some weired issues.
case is like this :-
initially i was on AIX 5.3
i have installed filesets related to my application and those were in APPLY state.(COMMIT is set as NO)
Then i have taken lslpp -l| grep -i <apps name>
in that i confirmed whether the filesets are... (1 Reply)
Hi,
I currently have one BE and would like to create an ABE.
# lustatus
BE_name Complete Active ActiveOnReboot CopyStatus
------------------------------------------------------------------------
coolthreads yes yes yes - But... (3 Replies)
i upgrade aix ml 5.3.2.1 to 5.3.2.2 but when running commnd #oslevel -r
shows out put, again 5.3.2.1-- where should i chek???
2-can any one tell me when mknfs command run which files get updated?? (2 Replies)
Discussion started by: nayyer
2 Replies
LEARN ABOUT DEBIAN
sbuild-update
SBUILD-UPDATE(1) Debian sbuild SBUILD-UPDATE(1)NAME
sbuild-update - update, upgrade, and clean an sbuild chroot with apt-get
SYNOPSIS
sbuild-update [-h|--help] [-V|--version] [--arch=architecture] [-u|--update] [-g|--upgrade] [-d|--dist-upgrade] [-c|--clean] [-a|--auto-
clean] [-r|--autoremove] CHROOT1 [CHROOT2 [CHROOTn...]]
sbuild-update -k|--keygen
(DEPRECATED) sbuild-upgrade [-h|--help] [-V|--version] CHROOT1 [CHROOT2 [CHROOTn...]]
(DEPRECATED) sbuild-distupgrade [-h|--help] [-V|--version] CHROOT1 [CHROOT2 [CHROOTn...]]
(DEPRECATED) sbuild-clean [-h|--help] [-V|--version] [-c|--clean] [-a|--autoclean] [-r|--autoremove] CHROOT1 [CHROOT2 [CHROOTn...]]
DESCRIPTION
sbuild-update runs apt-get inside the specified chroot performing update, upgrade, dist-upgrade, clean, autoclean, and/or autoremove
depending on the options specified on the command line.
sbuild-upgrade, sbuild-distupgrade, and sbuild-clean, are deprecated. They now simply run sbuild-update with the appropriate options
(--upgrade or --dist-upgrade for sbuild-upgrade or sbuild-distupgrade respectively) along with whatever arguments were passed in the
scripts.
OPTIONS
Actions
-h, --help
Display this manual.
-V, --version
Print version information.
--arch=architecture
Update chroot for the architecture specified.
-u, --update
Perform an apt-get update.
-g, --upgrade
Perform an apt-get upgrade.
-d, --dist-upgrade
Perform an apt-get dist-upgrade.
-c, --clean
Perform an apt-get clean.
-a, --autoclean
Perform an apt-get autoclean.
-r, --autoremove
Perform an apt-get autoremove.
-k, --keygen
Generate a GPG public/private key pair for self-signing local apt archives, used for installation of dependency packages. Note that
this requires a significant amount of entropy (randomness) and may hang on systems with poor entropy sources, such as headless sys-
tems without direct user input. In this situation, it is advisable to create the key on a trusted local system, and copy the files
to the build system by hand from /var/lib/sbuild/apt-keys/.
Chroot selection
CHROOT The chroot to use. Note that 'o', 's', 't', 'u' and 'e' may be used as abbreviations for 'oldstable', 'stable', 'testing', 'unsta-
ble' and 'experimental', respectively.
EXAMPLES
To update the unstable chroot:
% sbuild-update --update unstable
To upgrade the unstable chroot:
% sbuild-update --upgrade unstable
To clean the unstable chroot:
% sbuild-update --clean unstable
To perform an update, dist-upgrade, clean, autoclean, and autoremove for the unstable chroot:
% sbuild-update -udcar unstable
AUTHORS
Roger Leigh.
Andres Mejia.
COPYRIGHT
Copyright (C) 2006-2009 Roger Leigh <rleigh@debian.org>.
Copyright (C) 2010 Andres Mejia <mcitadel@gmail.com>.
SEE ALSO sbuild(1), sbuild-apt(1),
Version 0.63.2 18 Aug 2012 SBUILD-UPDATE(1)