11-13-2013
Hi,
You will need the following if you are connecting to the SUN serial/net management port from your laptop.
If you laptop has a serial connection available you will need
A cisco roll over cable.
http://www.cablesandkits.com/cisco-d...FaUWMgodMGQA2w
If you do not have a serial output then you need that cisco rollover cable connected to the serial to usb connector
http://www.newegg.com/Product/Produc...131113204911:s
Connect the serial cables together then plug that USB to your system.
Be aware that each USB port will be labeled as a different COM port.
Just find the com port in your device manager.
Use terminal emulators like putty and connect via "Serial"
Hit "enter" repeatly if you you get no response or "#." to get to ALOM
I hope that answers what you are looking for.
10 More Discussions You Might Find Interesting
1. IP Networking
I tried to telnet to my Sun server (E250) but I received the error message :
"Network error: Connection reset by peer".
I was able to ping my server. And, I had already commented off "CONSOLE=/dev/console" in /etc/default/login.
But, if I rlogin from all other servers, it works.
Is there... (2 Replies)
Discussion started by: dawn_lwf
2 Replies
2. Solaris
Greetings,
I have recently inherited 3 sun servers from a shop that my parent company closed. One of these servers is an old Ultra 1 running SunOS 5.6 that acts as a NIS server for the other two servers. This NIS server seems to boot OK and function properly as a NIS server. However, I can't... (6 Replies)
Discussion started by: SevenFortyOne
6 Replies
3. UNIX for Dummies Questions & Answers
Hi everybody
i am trying to telnet to sun server from win xp machine but getting message "x21 error connection closed by remote user". i had make changes in /etc/default/login & /etc/fuser file still i have not getting telnet access. my win xp machines ip is 10.205.121.177 & sun server ip is... (1 Reply)
Discussion started by: pshelke
1 Replies
4. AIX
Hi,
I have xmanager installed on my windows PC. But I am not able to connect to AIX server.
It's giving the error as follows:
The X11 forwarding request was rejected. Graphics mode is not coming up in AIX server.
Please help as I have to install oracle patchset urgently. (1 Reply)
Discussion started by: dwiravi
1 Replies
5. Shell Programming and Scripting
Dear Friends,
I need to transfer few files from a Windows 2000 server to Sun Solaris system, connected in the same network. This copy should be done as a batch job without asking for password to be entered every time. How to make this possible ???
At present I am using cygwin in my laptop... (4 Replies)
Discussion started by: ks_reddy
4 Replies
6. UNIX for Advanced & Expert Users
Hi,
I have two unix servers A and B. from A i am trying to use the ftp command to connect to B but I am getting the "ftp: connect: A remote host refused an attempted connect operation."
I checked the following things :
1.) Unix Server details for A and B after running the command uname -a... (3 Replies)
Discussion started by: mick_000
3 Replies
7. Red Hat
hi all
i am unable to connect remote server using ssh but i am able to ping the server
ssh service is running. (5 Replies)
Discussion started by: nikhil kasar
5 Replies
8. Linux
Hi,
Could you please help me with the below issue..
I'm running RHEL6 OS on both server (192.168.0.10) and client machines (192.168.0.1).
I'm trying to connect to server from the client machine using ftp service.
I have installed vsftpd daemon on both the machines.
I'm getting... (4 Replies)
Discussion started by: raosr020
4 Replies
9. Red Hat
I have managed to install Broadcom BCM43228 Wireless adapter on a laptop running CentOS 5.9 using instructions at:
wiki.centos.org/HowTos/Laptops/Wireless/Broadcom
I had the problem "Error for wireless request "Set Encode" (8B2A): SET failed on device... mentioned on the same page and solved... (0 Replies)
Discussion started by: cooltoad
0 Replies
10. AIX
After following the instructions given by resident moderator Bakunin over here
https://www.unix.com/aix/279862-installed-memory-32gb-but-shows-only-16gb.html
#1 Connect to ASMI
#2 Configure the deconfigured memory
#3 Start the machine
OK, everything is fine, however now cannot connect to... (5 Replies)
Discussion started by: filosophizer
5 Replies
dc(7) Miscellaneous Information Manual dc(7)
NAME
dc - serial line/mouse/keyboard
SYNOPSIS
controller dc0 at ibus0 slot 0 vector dcintr
DESCRIPTION
The dc serial line controller provides DECstation 2100, DECstation 3100, DECstation 5000, and DECstation 5100 computer systems with key-
board, mouse, and serial communications interfaces. The serial communications interfaces on the DECstation 2100 and DECstation 3100 provide
partial modem control. The serial communications interfaces on the DECstation 5000 provide full modem control. The device special file
/dev/tty01 on a DECstation 5100 provides full modem control, while the remaining ports provide no modem control at all. All serial commu-
nications interfaces operate at baud rates from B50 to B9600, excluding B200.
The dc ports are used as follows: Usage Graphics device keyboard at 4800 BPS Mouse or tablet at 4800 BPS Communications port 1 (w/modem
control)/local terminal Communications port 2 (w/modem control)/local terminal
On all systems except the DECstation 5100, serial port 2 is used for the system console port in server (that is, non-graphics) configura-
tions. On DECstation 5100s, the serial port labeled 3 on the back of the system is always the system console port. The serial system con-
sole port always operates at 9600 BPS, 8-bits, no parity; modem control is not supported.
RESTRICTIONS
Data communications equipment attached to the console serial port in server configurations must be set to 9600 BPS, 8-bits, no parity. The
scc driver enforces this restriction.
FILES
console terminal local terminal local terminal local terminal (DECstation 5100 only)
RELATED INFORMATION
console(7), devio(7), tty(7), MAKEDEV(8) delim off
dc(7)