11-13-2013
Hi,
You will need the following if you are connecting to the SUN serial/net management port from your laptop.
If you laptop has a serial connection available you will need
A cisco roll over cable.
http://www.cablesandkits.com/cisco-d...FaUWMgodMGQA2w
If you do not have a serial output then you need that cisco rollover cable connected to the serial to usb connector
http://www.newegg.com/Product/Produc...131113204911:s
Connect the serial cables together then plug that USB to your system.
Be aware that each USB port will be labeled as a different COM port.
Just find the com port in your device manager.
Use terminal emulators like putty and connect via "Serial"
Hit "enter" repeatly if you you get no response or "#." to get to ALOM
I hope that answers what you are looking for.
10 More Discussions You Might Find Interesting
1. IP Networking
I tried to telnet to my Sun server (E250) but I received the error message :
"Network error: Connection reset by peer".
I was able to ping my server. And, I had already commented off "CONSOLE=/dev/console" in /etc/default/login.
But, if I rlogin from all other servers, it works.
Is there... (2 Replies)
Discussion started by: dawn_lwf
2 Replies
2. Solaris
Greetings,
I have recently inherited 3 sun servers from a shop that my parent company closed. One of these servers is an old Ultra 1 running SunOS 5.6 that acts as a NIS server for the other two servers. This NIS server seems to boot OK and function properly as a NIS server. However, I can't... (6 Replies)
Discussion started by: SevenFortyOne
6 Replies
3. UNIX for Dummies Questions & Answers
Hi everybody
i am trying to telnet to sun server from win xp machine but getting message "x21 error connection closed by remote user". i had make changes in /etc/default/login & /etc/fuser file still i have not getting telnet access. my win xp machines ip is 10.205.121.177 & sun server ip is... (1 Reply)
Discussion started by: pshelke
1 Replies
4. AIX
Hi,
I have xmanager installed on my windows PC. But I am not able to connect to AIX server.
It's giving the error as follows:
The X11 forwarding request was rejected. Graphics mode is not coming up in AIX server.
Please help as I have to install oracle patchset urgently. (1 Reply)
Discussion started by: dwiravi
1 Replies
5. Shell Programming and Scripting
Dear Friends,
I need to transfer few files from a Windows 2000 server to Sun Solaris system, connected in the same network. This copy should be done as a batch job without asking for password to be entered every time. How to make this possible ???
At present I am using cygwin in my laptop... (4 Replies)
Discussion started by: ks_reddy
4 Replies
6. UNIX for Advanced & Expert Users
Hi,
I have two unix servers A and B. from A i am trying to use the ftp command to connect to B but I am getting the "ftp: connect: A remote host refused an attempted connect operation."
I checked the following things :
1.) Unix Server details for A and B after running the command uname -a... (3 Replies)
Discussion started by: mick_000
3 Replies
7. Red Hat
hi all
i am unable to connect remote server using ssh but i am able to ping the server
ssh service is running. (5 Replies)
Discussion started by: nikhil kasar
5 Replies
8. Linux
Hi,
Could you please help me with the below issue..
I'm running RHEL6 OS on both server (192.168.0.10) and client machines (192.168.0.1).
I'm trying to connect to server from the client machine using ftp service.
I have installed vsftpd daemon on both the machines.
I'm getting... (4 Replies)
Discussion started by: raosr020
4 Replies
9. Red Hat
I have managed to install Broadcom BCM43228 Wireless adapter on a laptop running CentOS 5.9 using instructions at:
wiki.centos.org/HowTos/Laptops/Wireless/Broadcom
I had the problem "Error for wireless request "Set Encode" (8B2A): SET failed on device... mentioned on the same page and solved... (0 Replies)
Discussion started by: cooltoad
0 Replies
10. AIX
After following the instructions given by resident moderator Bakunin over here
https://www.unix.com/aix/279862-installed-memory-32gb-but-shows-only-16gb.html
#1 Connect to ASMI
#2 Configure the deconfigured memory
#3 Start the machine
OK, everything is fine, however now cannot connect to... (5 Replies)
Discussion started by: filosophizer
5 Replies
LEARN ABOUT DEBIAN
auscope
AUSCOPE(1) General Commands Manual AUSCOPE(1)
NAME
auscope - Network Audio System Protocol Filter
SYNOPSIS
auscope [ option ] ...
DESCRIPTION
auscope is an audio protocol filter that can be used to view the network packets being sent between an audio application and an audio
server.
auscope is written in Perl, so you must have Perl installed on your machine in order to run auscope. If your Perl executable is not
installed as /usr/local/bin/perl, you should modify the first line of the auscope script to reflect the Perl executable's location. Or,
you can invoke auscope as
perl auscope [ option ] ...
assuming the Perl executable is in your path.
To operate, auscope must know the port on which it should listen for audio clients, the name of the desktop machine on which the audio
server is running and the port to use to connect to the audio server. Both the output port (server) and input port (client) are automati-
cally biased by 8000. The output port defaults to 0 and the input port defaults to 1.
ARGUMENTS
-i<input-port>
Specify the port that auscope will use to take requests from clients.
-o<output-port>
Determines the port that auscope will use to connect to the audio server.
-h<audio server name>
Determines the desktop machine name that auscope will use to find the audio server.
-v<print-level>
Determines the level of printing which auscope will provide. The print-level can be 0 or 1. The larger numbers provide greater
output detail.
EXAMPLES
In the following example, mcxterm is the name of the desktop machine running the audio server, which is connected to the TCP/IP network
host tcphost. auscope uses the desktop machine with the -h command line option, will listen for client requests on port 8001 and connect
to the audio server on port 8000.
Ports (file descriptors) on the network host are used to read and write the audio protocol. The audio client auplay will connect to the
audio server via the TCP/IP network host tcphost and port 8001:
auscope -i1 -o0 -hmcxterm
auplay -audio tcp/tcphost:8001 dial.snd
In the following example, the auscope verbosity is increased to 1, and the audio client autool will connect to the audio server via the
network host tcphost, while displaying its graphical interface on another server labmcx:
auscope -i1 -o0 -hmcxterm -v1
autool -audio tcp/tcphost:8001 -display labmcx:0.0
SEE ALSO
nas(1), perl(1)
COPYRIGHT
Copyright 1994 Network Computing Devices, Inc.
AUTHOR
Greg Renda, Network Computing Devices, Inc.
1.9.3 AUSCOPE(1)