i am receiving output as below :
does that means there is 1 virtual processors and
so number of physical processors available is 1.
and
so this means my soalris machien has one virtual and one physical processsor...please correct me if i am wrong.
Hi,
I have two questions here.
I need to find out the number of physical processors the HP-UX operating system is running in. Here i am referring to the physical processors in a system and not the number of cores.
I can get the number of cores using the command 'ioscan -fnkC processor'.... (7 Replies)
Hello All,
Can anybody please tell me what is the maximum limit of Physical IBM Power Machine which can be handled by single HMC at a single point of time?
Thanks,
Jenish (1 Reply)
Hello,
Firstly, apologies if the theme of this post is discussed elsewhere.
At the moment we have a dual-domain M5000 running. Each domain is running with equal amounts of CPU and memory.
What we'd like to do is move the 2 hosts in question (1 per domain) to a Solaris 10 zone of it's zone.... (2 Replies)
Trying to set or modify the randomly set hostID of a Solaris 10 virtual/guest machine that I installed on a Windows-XP host machine (using Virtual Box 4.1.12).
I was able to set/modify the hostname of the Solaris 10 virtual/guest machine during installation as well as via the Virtual Box... (4 Replies)
My RHEL virtual Machine Does not have Virtual Machine Manager Desktop Tool
Hi,
I don't seem to have the Virtual Machine Manager Desktop tool set up on my RHEL6 Machine. The Linux machine runs off VMWare player and I'm not sure whether it is a VMWare software issue or a problem with the RHEL6... (2 Replies)
Hi,
i am trying to find out hpw many virtual and physical processors does any linux machine has:
output of /proc/cpuinfo is as below :
# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 26
model name : Intel(R) Xeon(R) CPU... (8 Replies)
Hello,
please, can somebody tell me if can i virtualize Solaris 11 SPARC architecture in a x86 PC?
Virtualbox allows doing that? i need to run Solaris 11 SPARC to make a lab, and dont have any SUN machine to do on it.
Thanks in advance! (9 Replies)
I have a physical machine , just use vmware tools migrated data to virtual machine .
how can I check these two servers - old and new server , the data are the same , all files are copy to new server ?
thanks (2 Replies)
Hi All,
.
I am trying to find whether Solaris 11 installed on physical server or on VMware/KVM.
I tried uname -a but it's giving only whether i installed on X86 or sparc machine.
I tried prtdiag command but it's giving below information.
command : prtdiag -v |grep "System... (2 Replies)
Discussion started by: sravani25
2 Replies
LEARN ABOUT LINUX
psrinfo
psrinfo(1M) System Administration Commands psrinfo(1M)NAME
psrinfo - displays information about processors
SYNOPSIS
psrinfo [-p] [-v] [processor_id...]
psrinfo [-p] -s processor_id
DESCRIPTION
psrinfo displays information about processors. Each physical processor may support multiple virtual processors. Each virtual processor is
an entity with its own interrupt ID, capable of executing independent threads.
Without the processor_id operand, psrinfo displays one line for each configured processor, displaying whether it is on-line, non-interrupt-
ible (designated by no-intr), spare, off-line, faulted or powered off, and when that status last changed. Use the processor_id operand to
display information about a specific processor. See OPERANDS.
OPTIONS
The following options are supported:
-s processor_id Silent mode. Displays 1 if the specified processor is fully on-line. Displays 0 if the specified processor is non-inter-
ruptible, spare, off-line, faulted or powered off.
Use silent mode when using psrinfo in shell scripts.
-p Display the number of physical processors in a system.
When combined with the -v option, reports additional information about each physical processor.
-v Verbose mode. Displays additional information about the specified processors, including: processor type, floating point
unit type and clock speed. If any of this information cannot be determined, psrinfo displays unknown.
When combined with the -p option, reports additional information about each physical processor.
OPERANDS
The following operands are supported:
processor_id The processor ID of the processor about which information is to be displayed.
Specify processor_id as an individual processor number (for example, 3), multiple processor numbers separated by spaces
(for example, 1 2 3), or a range of processor numbers (for example, 1-4). It is also possible to combine ranges and (indi-
vidual or multiple) processor_ids (for example, 1-3 5 7-8 9).
EXAMPLES
Example 1: Displaying Information About All Configured Processors in Verbose Mode
The following example displays information about all configured processors in verbose mode.
psrinfo -v
Example 2: Determining If a Processor is On-line
The following example uses psrinfo in a shell script to determine if a processor is on-line.
if [ "`psrinfo -s 3 2> /dev/null`" -eq 1 ]
then
echo "processor 3 is up"
fi
Example 3: Displaying Information About the Physical Processors in the System
With no additional arguments, the -p option displays a single integer: the number of physical processors in the system:
> psrinfo -p
8
psrinfo also accepts command line arguments (processor IDs):
> psrinfo -p 0 512 # IDs 0 and 512 exist on the
1 # same physical processor
> psrinfo -p 0 1 # IDs 0 and 1 exist on different
2 # physical processors
In this example, virtual processors 0 and 512 exist on the same physical processor. Virtual processors 0 and 1 do not. This is specific to
this example and is and not a general rule.
EXIT STATUS
The following exit values are returned:
0 Successful completion.
>0 An error occurred.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO psradm(1M), p_online(2), processor_info(2), attributes(5)DIAGNOSTICS
psrinfo: processor 9: Invalid argument
The specified processor does not exist.
SunOS 5.10 21 Feb 2004 psrinfo(1M)