Sponsored Content
Operating Systems AIX Nim client with different subnet to Master Post 302872483 by ibmtech on Friday 8th of November 2013 12:24:47 PM
Old 11-08-2013
Ok, first of all I need to know the 'IP, gateway address & subnet mask of NIM and client (of 193 network).

If you are restoring mksysb on new client using NIM, you use SMS menu to configure the IP's

Giving an example of my environment
Code:
Under the Main menu, 
select option no 2. Setup remote IPL (Initial program Load)
Select the network adapter
Select IPv4, then BOOTP, then IP Parameters
IP Parameters
Interpartition Logical LAN: U9117.MMD.104F3F7-V15-C4-T1
 1.   Client IP Address                    [10.10.170.250]    --> My client IP
 2.   Server IP Address                    [10.10.4.140]    --> My NIM IP
 3.   Gateway IP Address                   [10.10.170.1]    --> Client Default G/W
 4.   Subnet Mask                          [255.255.255.0]   --> Client Subnet mask
 press esc (escape), and select option 3. Ping test

The ping test should be successful.

The above is for new clients

If you are saying you already have some client existing on 193 network, then you gotta define the network on NIM server 1st, and on client run the below
Code:
niminit -a master=<nimserver name> -a name=<clientname>
then run 
smitty nim_config_services  --> Communication Protocol used by client --> nimsh

Hit enter and try to connect from NIM, it should work.


Hope this helps.

Last edited by ibmtech; 11-08-2013 at 01:27 PM.. Reason: Example
 

10 More Discussions You Might Find Interesting

1. AIX

Nim Master Problem

All, I'm testing NIM on a 7026-m80 machine. But everytime i want to setup the master, i get this error message... Anyone who knows how to solve this issue? google doesn't seem to know much about it # nim_master_setup ############################## NIM master setup... (1 Reply)
Discussion started by: kvanelshocht
1 Replies

2. AIX

nim master

Hi, I want to know what are steps required to create nim master in aix? Regards, Manoj (1 Reply)
Discussion started by: manoj.solaris
1 Replies

3. AIX

nim master

Hi, I want to know how to create nim master in AIX 5.3. Regards, Manoj (0 Replies)
Discussion started by: manoj.solaris
0 Replies

4. AIX

NIM master-client connectivity issue

Hello All, I believe my NIM master is fine. lsnim and cat /etc/niminfo gives me the right output. While doing "lsnim" on a client machine, I get ksh:lsnim:"not found". Please someone be nice enough to explain what are the steps to verify the master and client connectivity to do all the NIM... (3 Replies)
Discussion started by: solaix14
3 Replies

5. AIX

Back up a client NIM from nim master

Hello everyone Im trying to backup a nim client from nim master but I got this message COMMAND STATUS Command: failed stdout: yes stderr: no Before command completion, additional instructions may appear below. 0042-001 nim:... (2 Replies)
Discussion started by: lo-lp-kl
2 Replies

6. AIX

Changing subnet mask for a NIM Network.

I am new to this forum so please bare with me. I did search for this answer prior to posting but no luck. Running an AIX NIM Master at 5.3TL9SP4, with about 100 clients. The subnet of one of the networks defined in the NIM env has changed. When I go to Manage Networks, Change/Show... (0 Replies)
Discussion started by: juredd1
0 Replies

7. AIX

NIM : remove nim client info from the client

Hi. I change my client's IP and hostname but I forgot to change anything on the master. How can I redefine or modify my client's resource from my master, or with using smit niminit from my client ? Tks (2 Replies)
Discussion started by: stephnane
2 Replies

8. AIX

NIM Master hostname

hi Admins, How can I check the NIM master hostname/IP name from NIM client ? I don't see any option that I can try with nimclient command. Let me know.. Thanks, (5 Replies)
Discussion started by: snchaudhari2
5 Replies

9. AIX

NIM master with multiple client subnets

Hi Guys, I'm building a new NIM environment with clients on 3 different subnets. I want to get some advise on what is the best approach for this kind of setup. This is the sample network for my new NIM. Master IP: 10.20.1.20 Client IP subnet_1: 10.20.1.21 Client IP subnet_1: 10.30.1.21... (5 Replies)
Discussion started by: kaelu26
5 Replies

10. AIX

Problem in communication nim client with nim master

Hello, I have an AIX6.1 machine which is a nim client to my nim master which is also AIX6.1 machine. I had some problem to perform an installation on my client using smit nim . i removed /etc/niminfo file in order to do the initialization again but when i run the command niminit -a name=client... (0 Replies)
Discussion started by: omonoiatis9
0 Replies
netmasks(4)                                                        File Formats                                                        netmasks(4)

NAME
netmasks - network mask database SYNOPSIS
/etc/inet/netmasks /etc/netmasks DESCRIPTION
The netmasks file contains network masks used to implement IP subnetting. It supports both standard subnetting as specified in RFC-950 and variable length subnetting as specified in RFC-1519. When using standard subnetting there should be a single line for each network that is subnetted in this file with the network number, any number of SPACE or TAB characters, and the network mask to use on that network. Network numbers and masks may be specified in the conventional IP `.' (dot) notation (like IP host addresses, but with zeroes for the host part). For example, 128.32.0.0 255.255.255.0 can be used to specify that the Class B network 128.32.0.0 should have eight bits of subnet field and eight bits of host field, in addition to the standard sixteen bits in the network field. When using variable length subnetting, the format is identical. However, there should be a line for each subnet with the first field being the subnet and the second field being the netmask that applies to that subnet. The users of the database, such as ifconfig(1M), perform a lookup to find the longest possible matching mask. It is possible to combine the RFC-950 and RFC-1519 form of subnet masks in the net- masks file. For example, 128.32.0.0 255.255.255.0 128.32.27.0 255.255.255.240 128.32.27.16 255.255.255.240 128.32.27.32 255.255.255.240 128.32.27.48 255.255.255.240 128.32.27.64 255.255.255.240 128.32.27.80 255.255.255.240 128.32.27.96 255.255.255.240 128.32.27.112 255.255.255.240 128.32.27.128 255.255.255.240 128.32.27.144 255.255.255.240 128.32.27.160 255.255.255.240 128.32.27.176 255.255.255.240 128.32.27.192 255.255.255.240 128.32.27.208 255.255.255.240 128.32.27.224 255.255.255.240 128.32.27.240 255.255.255.240 128.32.64.0 255.255.255.192 can be used to specify different netmasks in different parts of the 128.32.0.0 Class B network number. Addresses 128.32.27.0 through 128.32.27.255 have a subnet mask with 28 bits in the combined network and subnet fields (often referred to as the subnet field) and 4 bits in the host field. Furthermore, addresses 128.32.64.0 through 128.32.64.63 have a 26 bits in the subnet field. Finally, all other addresses in the range 128.32.0.0 through 128.32.255.255 have a 24 bit subnet field. Invalid entries are ignored. SEE ALSO
ifconfig(1M), inet(7P) Postel, Jon, and Mogul, Jeff, Internet Standard Subnetting Procedure, RFC 950, Network Information Center, SRI International, Menlo Park, Calif., August 1985. V. Fuller, T. Li, J. Yu, K. Varadhan, Classless Inter-Domain Routing (CIDR): an Address Assignment and Aggregation Strategy, RFC 1519, Network Information Center, SRI International, Menlo Park, Calif., September 1993. T. Pummill, B. Manning, Variable Length Subnet Table For IPv4, RFC 1878, Network Information Center, SRI International, Menlo Park, Calif., December 1995. NOTES
/etc/inet/netmasks is the official SVr4 name of the netmasks file. The symbolic link /etc/netmasks exists for BSD compatibility. SunOS 5.10 7 Jan 1997 netmasks(4)
All times are GMT -4. The time now is 06:46 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy