Sponsored Content
Special Forums Hardware Filesystems, Disks and Memory Ask concept soft partition vs hard partition Post 302871521 by cjcox on Wednesday 6th of November 2013 10:35:35 AM
Old 11-06-2013
You can think of soft partitioning as a logical partition. It's a feature of the volume manager that Solaris provides. A hard partition will usually be "faster", but a lot depends on how you have things configured to begin with.

Soft partitions, because they are more abstract can be viewed as "friendlier" or "more flexible".

IMHO, if performance is a must, then you're likely going to be going SSD, etc...

So personally, I prefer the flexibility that soft partitioning provides. Obviously things that are wanting a true partition (some enterprise software may require it) you'll have no choice.

There's a chicken and egg problem with things under Solaris volume management, so there are still places like early on in the boot where hard partitions are going to be required. Depending on the complexity of your storage, it may also have that kind of requirement. But, after boot, if all visible as disk... I say pool it up and carve it up logically.

Just my two cents.
This User Gave Thanks to cjcox For This Post:
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Partition Hard drive

Hello everyone. I am new to Linux so hope some one could help me here. I have a 30 Gb HD and windows Xp is my O/S, HD is not partitioned,but I want to Partitioned it, so I could Install Knoppix(Linux)on one of the partitioned one, how could I do this? OR should I erase every thing and then... (1 Reply)
Discussion started by: amir
1 Replies

2. UNIX for Dummies Questions & Answers

I've created a partition with GNU Parted, how do I mount the partition?

I've created a partition with GNU Parted, how do I mount the partition? The manual information at http://www.gnu.org/software/parted/manual/parted.html is good, but I am sure about how I mount the partition afterwards. Thanks, --Todd (1 Reply)
Discussion started by: jtp51
1 Replies

3. UNIX for Advanced & Expert Users

Hard-disk partition is Full problem?

HI, Currently I am working in One of the webhosting company and I found on one of my server "/home" partition is getting full say 105% usage... But when I actually check the partition size using "du -h", exact partition utilization is only 60-70%. So... (1 Reply)
Discussion started by: jagdish.machhi@
1 Replies

4. Solaris

Puzzled over over the relationship between the partition and geometry of hard disk.

Not sure why solaris couldn't detect the geometry of a hard disk which has a working OS of winxp pro. Is it due to the different OS that the partition information is stored in different location? When I type '"format" it is shown as below, c3d1 < drive type unknown>... (5 Replies)
Discussion started by: just.srad
5 Replies

5. Solaris

Need advice on soft partition

Hello All, Am trying to expand the soft partition which is in mirror. Am getting following error. Whether is it possible? or i am doing wrongly. Please assist. bash-2.05# metastat d100 d100: Mirror Submirror 0: d102 State: Okay Submirror 1: d105 State: Okay ... (7 Replies)
Discussion started by: gowthamakanthan
7 Replies

6. Solaris

Replacing a hard disk (SVM) with a soft partition?

The following is the summarry:- 1) Four disks in server ie (c1t0d0. c1t1d0, c1t2d0, c1t3d0). c1t2d0 is the disk to be replaced. c1t0d0 and c1t2d0 are mirrors. c1t1d0 and c1t3d0 are mirrors. Metadb to be deleted is in c1t2d0s7 a) Mirror d35 has 2 submirrors d38 and d39 d38 is a stripe... (0 Replies)
Discussion started by: aji1729
0 Replies

7. Solaris

Rename soft partition

Hi folks, is there any possibility how to rename soft partitions?? Here I found that this is not possible (I know that it is) but I need do it in some supported way. http://dlc.sun.com/osol/docs/content/LOGVOLMGRADMIN/tasks-basics-5.html This is production system it is why I need do it... (0 Replies)
Discussion started by: brusell
0 Replies

8. Solaris

Partition overlaps another partition while creating new parition in solaris

hi all while formatting hard disk i am getting following error. Partition 1 ends at 266338338 It must be between 34 and 143374704. label error: EFI Labels do not support overlapping partitions Partition 8 overlaps partition 1. Warning: error writing EFI. Label failed. I have formatted the... (2 Replies)
Discussion started by: nikhil kasar
2 Replies

9. Red Hat

Shrink LVM partition & create new Linux Primary partition

Hello All, I have a Red Hat Linux 5.9 Server installed with one hard disk & 2 Partitions created on it as follows, /boot - Linux Partition & another is LVM - One VG & under that 5-6 Logical volumes(var,opt,home etc). Here my requirement is to take out 1GB of space from LVM ( Any logical... (5 Replies)
Discussion started by: gr8_usk
5 Replies

10. Solaris

Extend a soft partition

Hi, I need to extend a soft partition from 20G to 100G. New disk is already added as a meta device. This soft partition is already assigned to a guest LDOM. Can someone let me know the steps to increase soft partition so guest LDOM can recognize the new space. Thanks (1 Reply)
Discussion started by: Gho
1 Replies
DVHTOOL(8)						      System Manager's Manual							DVHTOOL(8)

NAME
dvhtool - Disk volume header manipulation tool SYNOPSIS
dvhtool --device devicename [ option ] dvhtool -d devicename [ option ] DESCRIPTION
dvhtool is a utility for displaying SGI disk partition and volume header information as well as for copying files to and from the volume header. It is similar to the IRIX(tm) utility of the same name, however the options and usage are quite different. Also, the IRIX utility cannot display partition and boot file information. The disk volume header includes the disk partition table and the volume directory. The volume directory is an index to the files stored in the volume header part of the disk. These files can be anything but are usually standalone programs (like sash, the SGI standalone shell). The space available for files is usually limited to one, two or a few megabytes, this can only be changed by repartitioning the disk with fx, the SGI disk formatting and partitioning tool or fdisk. You must be root to invoke dvhtool. The device name can be /dev/sda for the first disk, /dev/sdb for the second, and so on. dvhtool will also work on a file image of a disk volume header. OPTIONS -d, --device devicename Specify the volume header device name (or file image) --print-volume-header Show volume header data only --print-volume-directory Show volume table of contents --print-partitions Show partition data --print-all Equivalent to all three above options --vh-remove name Remove volhdr file name. --vh-to-unix name file Copy volhdr file name to Unix file file --unix-to-vh file name Copy Unix file file to volhdr as name --help Show usage information SEE ALSO
fdisk(8) IRIX tools: fx(1M), prtvtoc(1M), vh(7M). AUTHORS
dvhtool was written by Ralf Baechle <ralf@oss.sgi.com>, Keith M. Wesolowski <wesolows@foobazco.org>, Tor Arntsen <tor@spacetec.no>, Guido Guenther <agx@debian.org>. 4th Berkeley Distribution July 2000 DVHTOOL(8)
All times are GMT -4. The time now is 02:38 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy