I can't boot my AIX, it hangs and stops at the code error: 0518
After searching google, I knew the problem is due to problems in File Systems.
So the solution is booting from any bootable media, then run these commands in maintenance mode:
All of them is done successfully except two, which is:
It gives me this error:
What is the solution!?
Waiting our experts or anyone who know the solution, many thanks.
Last edited by Scott; 10-31-2013 at 10:39 AM..
Reason: Please use code tags
Hi, Anyone can help
My solaris 8 system has the following
/dev/null , /dev/tty and /dev/console
All permission are lrwxrwxrwx
Can this be change to a non-world write ??
any impact ?? (12 Replies)
Hello,
i am using finch (unix commandline instant messaging client using libgnt) which is running connected to /dev/pts/1
Now I would like to "remote control" the program by sending the key combinations normally typed on the keyboard from a programm in another shell. So I tried:... (0 Replies)
So, we removed a LUN from the SAN and the system is refusing to remove the references to it in the /dev folder. I've done the following:
devfsadm -Cv
powermt -q
luxadm -e offline <drive path>
luxadm probe
All those commands failed to remove the path. The drive stills shows up as <drive... (13 Replies)
Hi,
How can i check that i am using RAW devices for storage in my AIX machine...
Also after adding a LUN from storage to a aix host, when i check /dev in the host, i can see both rhdisk and hdisk with same number
eg:
dcback1(root):/dev>ls -lrt | grep disk12
crw------- 1 root ... (4 Replies)
Objective: To recreate the partitioning setup of /dev/sda on /dev/sdc
How would I parse the below information and initialize variables
(an array?) that can be used to build sgdisk commands in a script, regardless of the number of partitions?
Something along the lines of:
sgdisk -n... (12 Replies)
Hi,
In our HP-UX B.11.11. I could not find dev/urandom and dev/random
Are all pseudo-devices implemented as device drivers, or in need to run /configure some package to install the package to have dev/urandom.
Please help (4 Replies)
Discussion started by: rashi
4 Replies
LEARN ABOUT OPENDARWIN
in.rarpd
in.rarpd(1M) System Administration Commands in.rarpd(1M)NAME
in.rarpd, rarpd - DARPA Reverse Address Resolution Protocol server
SYNOPSIS
/usr/sbin/in.rarpd [-d] -a
/usr/sbin/in.rarpd [-d] device unit
DESCRIPTION
in.rarpd starts a daemon that responds to Reverse Address Resolution Protocol (RARP) requests. The daemon forks a copy of itself that runs
in background. It must be run as root.
RARP is used by machines at boot time to discover their Internet Protocol (IP) address. The booting machine provides its Ethernet address
in a RARP request message. Using the ethers and hosts databases, in.rarpd maps this Ethernet address into the corresponding IP address
which it returns to the booting machine in an RARP reply message. The booting machine must be listed in both databases for in.rarpd to
locate its IP address. in.rarpd issues no reply when it fails to locate an IP address.
in.rarpd uses the STREAMS-based Data Link Provider Interface (DLPI) message set to communicate directly with the datalink device driver.
OPTIONS
The following options are supported:
-a Get the list of available network interfaces from IP using the SIOCGIFADDR ioctl and start a RARP daemon process on each interface
returned.
-d Print assorted debugging messages while executing.
EXAMPLES
Example 1: Starting An in.rarpd Daemon For Each Network Interface Name Returned From /dev/ip:
The following command starts an in.rarpd for each network interface name returned from /dev/ip:
example# /usr/sbin/in.rarpd -a
Example 2: Starting An in.rarpd Daemon On The Device /dev/le With The Device Instance Number 0
The following command starts one in.rarpd on the device /dev/le with the device instance number 0.
example# /usr/sbin/in.rarpd le 0
FILES
/etc/ethers File or other source, as specified by nsswitch.conf(4).
/etc/hosts File or other source, as specified by nsswitch.conf(4).
/tftpboot
/dev/ip
/dev/arp
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWbsu |
+-----------------------------+-----------------------------+
SEE ALSO svcs(1), boot(1M), ifconfig(1M), svcadm(1M), ethers(4), hosts(4), netconfig(4), nsswitch.conf(4),attributes(5), smf(5), dlpi(7P)
Finlayson, R., Mann, T., Mogul, J., and Theimer, M., RFC 903, A Reverse Address Resolution Protocol, Network Information Center, SRI Inter-
national, June 1984.
NOTES
The in.rarpd service is managed by the service management facility, smf(5), under the service identifier:
svc:/network/rarp
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The ser-
vice's status can be queried using the svcs(1) command.
SunOS 5.10 20 Aug 2004 in.rarpd(1M)