I had installed solaris 10 on 440 on disk 0. I had done ufsrestore on disk1 from tape and then rebooted
Rebooting with command: boot disk1
Boot device: /pci@1f,700000/scsi@2/disk@1,0 File and args:
SunOS Release 5.10 Version Generic_118833-24 64-bit
Copyright 1983-2006 Sun Microsystems,... (3 Replies)
Hi All,
We had a Sun Netra T1 go down the other day, the root disk was mirrored using vxvm. Upon boot from either disk, we had the following error appear:
WARNING: Error writing ufs log state
WARNING: ufs log for / changed state to Error
WARNING: Please umount(1M) / and run... (4 Replies)
Hello,
I have a test PC running Fedora 10. Friday evening it was working fine, I have some perl scripts which are scheduled to run every morning.
But when I started work this morning, I found I cannot ping the machine. When I switched on the monitor, I saw the GRUB promt :(. I am not sure... (10 Replies)
Hey All,
Im using Fedora 2.6 (which is cannot be changed for compatibility reasons).
I cloned a drive from a different server and when i added this drive to a new box, during startup it hangs on "Configuring Kernel Parameters:"
Is there any way to bypass this process and still boot... (0 Replies)
hello everyone,
I have Matlab installed on Fedora 16. I tried running it by simply typing on terminal:
$ matlabBut it returned the follwoing error:
--- can anyone suggest a solution?
cheers,
peter
---------- Post updated at 10:57 PM ---------- Previous update was at 10:54 PM ----------... (1 Reply)
Hi,
Can you help me on booting x86 server configured under VxVM. Server boots fine normally from both the disks but if I try to boot server from mirror disk without starting veritas, then it does not boot.
vxplex -g rootdg dis var-02
vxplex -g rootdg dis swapvol-02
vxplex -g rootdg dis... (2 Replies)
Hi Solaris 10 Experts,
I am wondering what is the correct syntax to edit in Grub when trying to specify the local ZFS boot disk while booting up from a Solaris 10 x86 64bits DVD installation disk. In other word, I try to boot up from local disk without removing the Solaris installation disk... (0 Replies)
Hi,
I'm looking to copy a boot disk on an old Solaris 8 system using dd. I'll bring the system down to single user mode and begin from there. I'm copying my source disk to a larger target disk. Do I need to do anything other than the 'dd' command below because the target disk is bigger? ... (2 Replies)
Hi,
I just P2V an old machine running Redhat 5.5 on a physical server. After P2V was completed, when boot up it got an error. Please refer to the attachment for the error. Please assist. Thanks. (2 Replies)
Discussion started by: freshmeat
2 Replies
LEARN ABOUT OPENSOLARIS
pcata
pcata(7D) Devices pcata(7D)NAME
pcata - PCMCIA ATA card device driver
SYNOPSIS
pcata@socket#:a -u
pcata@socket#:a -u,raw
DESCRIPTION
The PCMCIA ATA card device driver supports PCMCIA ATA disk and flash cards that follow the following standards:
o PC card 2.01 compliance (MBR+fdisk table required for all platforms).
o PC card ATA 2.01 compliance.
o PC card services 2.1 compliance.
The driver supports standard PCMCIA ATA cards that contain a Card Information Structure (CIS). For PCMCIA, nodes are created in /devices
that include the socket number as one component of the device name referred to by the node. However, the names in /dev, /dev/dsk, and
/dev/rdsk follow the current conventions for ATA devices, which do not encode the socket number in any part of the name. For example, you
may have the following:
+----------------+-----------------------------------+---------------------+
|Platform | /devices name | /dev/dsk name |
+----------------+-----------------------------------+---------------------+
|x86 | /devices/isa/pcic@1,3e0 /disk@0:a | /dev/dsk/c1d0s0 |
+----------------+-----------------------------------+---------------------+
|SPARC | /devices/iommu@f,e0000000 | /dev/dsk/c1d0s0 |
| | /sbus@f,e0001000 /SUNW, pcm- | |
| | cia@3,0 /disk@0:a | |
+----------------+-----------------------------------+---------------------+
PRECONFIGURATION
If a PC Card ATA device is recognized, the pcata driver is automatically loaded, IRQs allocated, devices nodes created, and special files
created (if they do not already exist).
Known Problems and Limitations
o You need to umount the file system before removing the disk.
o The ufs file systems on removable media (PC Card ATA) should have one of the onerror={panic, lock, umount} mount options set.
CONFIGURATION
Configuration topics include initial installation and configuration, identifying an unrecognized device, special files and hot-plugging.
Initial Installation and Configuration
1. Install the Solaris software.
2. Boot the system.
3. Insert the PC card ATA device.
Identifying an Unrecognized Device
If you insert a PC card ATA device and it is not recognized (no special files created), use the prtconf command to identify the problem.
1. Run the prtconf -D command to see if your pcata card is recognized. (A recognized device will appear at the end of the prtconf
output. For example:
# prtconf -D
. . .
pcic, instance #0 (driver name: pcic)
. . .
disk, instance #0
2. If pcata does not appear in the prtconf output, there is a problem with the PC card adapter configuration or with the hardware.
Check to see whether the problem is with the card or the adapter by trying to use the card on another machine and by seeing if
it works on the same machine using DOS.
Special Files
For PC card devices, nodes are created in /devices that include the socket number as one component of a device name that the node refers
to. However, the /prtc/dev names and the names in /dev/dsk and /dev/rdsk do follow the current convention for ATA devices, which do not
encode the socket number in any part of the name.
Hot-Plugging
o If you want to remove the disk, you must unmount the file system.
o Use the mkfs_pcfs(1M) command to create a pcfs file system:
# mkfs -F pcfs /dev/rdsk/c#d#p0:d
o To mount a pcfs file system, type:
# mount -F pcfs /dev/dsk/c#d#p0:c /mnt
o If you want to create a ufs file system, use the newfs command and type:
# newfs /dev/rdsk/c#d#s#
o To mount a ufs file system, type:
# mount -F ufs /dev/dsk/c#d#s# /mnt
o To create a Solaris partition, run the format command and go to the Partition menu. For more information, see the format(1M) man
page.
FILES
/kernel/drv/pcata pcata driver
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWpsdpr |
+-----------------------------+-----------------------------+
SEE ALSO format(1M), mount(1M), newfs(1M), pcmcia(7D), attributes(5), pcfs(7FS)SunOS 5.11 2 Mar 2007 pcata(7D)