Solved: Disk Unable to Boot Post: 302869561

Sponsored Content

Operating Systems Solaris Solved: Disk Unable to Boot Post 302869561 by br1an on Wednesday 30th of October 2013 02:30:33 PM

10-30-2013

Registered User

Hopefully this says something now,

Code:

Boot device: disk0  File and args:
SunOS Release 5.9 Version Generic_118558-34 64-bit
Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Hardware watchdog enabled
RealSecure Packet Capture Driver Version 1.8
Built at 14:38:42 on 09/13/10
NOTICE: VxVM not started
configuring IPv4 interfaces: bge0.
Hostname:XXXXXXX.XXXX
VxVM  NOTICE V-5-2-3347 Volume Manager not started
The / file system (/dev/rdsk/c1t0d0s0) is being checked.
fsck: could not stat /dev/rdsk/c1t0d0s0: No such file or directory
WARNING - Unable to repair the / filesystem. 
Run fsck manually (fsck -F ufs /dev/rdsk/c1t0d0s0). 
Exit the shell when done to continue the boot process.
Type control-d to proceed with normal startup,(or give root password for system maintenance):

System does not respond after this, I had to reset the system from the ALOM.

Code:

{1} ok boot cdrom -s
Boot device: /pci@1e,600000/ide@d/cdrom@0,0:f  File and args: -s
SunOS Release 5.9 Version Generic_118558-11 64-bit
Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Hardware watchdog enabled
Configuring /dev and /devices
Using RPC Bootparams for network configuration information.
Skipping interface bge3
Skipping interface bge2
Skipping interface bge1
Skipping interface bge0
\
INIT: SINGLE USER MODE
# 
# ls
a            dev          kernel       opt          reconfigure  usr
bin          devices      lib          platform     sbin         var
cdrom        etc          mnt          proc         tmp          webstart
# mount -F UFS /dev/dsk/c1t0d0s0 /a
mount: operation not applicable to FSType UFS
# mount /dev/dsk/c1t0d0s0 /a
# df -h
Filesystem             size   used  avail capacity  Mounted on
/pci@1e,600000/ide@d/cdrom@0,0:b
                       270M   253M     0K   100%    /
swap                   7.6G   424K   7.6G     1%    /tmp
proc                     0K     0K     0K     0%    /proc
mnttab                   0K     0K     0K     0%    /etc/mnttab
/tmp/devices           7.6G   424K   7.6G     1%    /devices
/tmp/dev               7.6G   424K   7.6G     1%    /dev
/devices/pci@1e,600000/ide@d/sd@0,0:a
                       305M   305M     0K   100%    /cdrom
fd                       0K     0K     0K     0%    /dev/fd
/dev/dsk/c1t0d0s0      9.4G   3.9G   5.4G    42%    /a

br1an

View Public Profile for br1an

Find all posts by br1an

9 More Discussions You Might Find Interesting

1. Solaris

unable to boot from disk1

I had installed solaris 10 on 440 on disk 0. I had done ufsrestore on disk1 from tape and then rebooted Rebooting with command: boot disk1 Boot device: /pci@1f,700000/scsi@2/disk@1,0 File and args: SunOS Release 5.10 Version Generic_118833-24 64-bit Copyright 1983-2006 Sun Microsystems,...

2. Solaris

vxvm root disk booting problem - solved with boot -a. How?

Hi All, We had a Sun Netra T1 go down the other day, the root disk was mirrored using vxvm. Upon boot from either disk, we had the following error appear: WARNING: Error writing ufs log state WARNING: ufs log for / changed state to Error WARNING: Please umount(1M) / and run...

3. Red Hat

Unable to boot Fedora 10

Hello, I have a test PC running Fedora 10. Friday evening it was working fine, I have some perl scripts which are scheduled to run every morning. But when I started work this morning, I found I cannot ping the machine. When I switched on the monitor, I saw the GRUB promt :(. I am not sure...

4. Hardware

[Solved] Boot Lockup After Drive Swap

Hey All, Im using Fedora 2.6 (which is cannot be changed for compatibility reasons). I cloned a drive from a different server and when i added this drive to a new box, during startup it hangs on "Configuring Kernel Parameters:" Is there any way to bypass this process and still boot...

5. Fedora

[Solved] Unable to start Matlab program

hello everyone, I have Matlab installed on Fedora 16. I tried running it by simply typing on terminal: $ matlabBut it returned the follwoing error: --- can anyone suggest a solution? cheers, peter ---------- Post updated at 10:57 PM ---------- Previous update was at 10:54 PM ----------...

6. Solaris

Unable to boot from mirror disk on x86 server configured under VxVM

Hi, Can you help me on booting x86 server configured under VxVM. Server boots fine normally from both the disks but if I try to boot server from mirror disk without starting veritas, then it does not boot. vxplex -g rootdg dis var-02 vxplex -g rootdg dis swapvol-02 vxplex -g rootdg dis...

7. Solaris

How to specify local boot up disk in CD boot Grub?

Hi Solaris 10 Experts, I am wondering what is the correct syntax to edit in Grub when trying to specify the local ZFS boot disk while booting up from a Solaris 10 x86 64bits DVD installation disk. In other word, I try to boot up from local disk without removing the Solaris installation disk...

8. Solaris

Use 'dd' to copy boot disk to larger target disk

Hi, I'm looking to copy a boot disk on an old Solaris 8 system using dd. I'll bring the system down to single user mode and begin from there. I'm copying my source disk to a larger target disk. Do I need to do anything other than the 'dd' command below because the target disk is bigger? ...

9. Red Hat

Unable to boot up after P2V

Hi, I just P2V an old machine running Redhat 5.5 on a physical server. After P2V was completed, when boot up it got an error. Please refer to the attachment for the error. Please assist. Thanks.

LEARN ABOUT MOJAVE

mkdevmaps

mkdevmaps(1M)                                             System Administration Commands                                             mkdevmaps(1M)

NAME

       mkdevmaps - make device_maps entries

SYNOPSIS

       /usr/sbin/mkdevmaps

DESCRIPTION

       The  mkdevmaps  command  writes  to standard out a set of device_maps(4) entries describing the system's frame buffer, audio, and removable
       media devices.

       The mkdevmaps command is used by the init.d(4) scripts to create or update the /etc/security/device_maps file.

       Entries are generated based on the device special files found in /dev. For the different  categories  of  devices,  the  mkdevmaps  command
       checks for the following files under /dev:

       audio           /dev/audio, /dev/audioctl, /dev/sound/...
       tape            /dev/rst*, /dev/nrst*, /dev/rmt/...
       floppy          /dev/diskette, /dev/fd*, /dev/rdiskette, /dev/rfd*
       removable disk  /dev/dsk/c0t?d0s?, /dev/rdsk/c0t?d0s?
       frame buffer    /dev/fb

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE         |      ATTRIBUTE VALUE        |
       +-----------------------------+-----------------------------+
       |Availability                 |SUNWcsu                      |
       +-----------------------------+-----------------------------+
       |Interface Stability          |Obsolete                     |
       +-----------------------------+-----------------------------+

SEE ALSO

       allocate(1), bsmconv(1M), attributes(5)

NOTES

       mkdevmaps might not be supported in a future release of the Solaris operating system.

SunOS 5.10                                                          8 Oct 2003                                                       mkdevmaps(1M)