iptables - similar syntax to cisco acl Post: 302869515

5 More Discussions You Might Find Interesting

1. Cybersecurity

ACL

Hi all, I've just been handled the responsibility for a FTP-site. Having no experiens of UNIX at all. And now one of my users needs to have full access to the usr directory and all it's subdirectories, don't know why just trying to do what the boss tells me. The type of UNIX is FreeBSD and the...

2. Cybersecurity

pass syntax iptables to ipfw

Hello, excuse my English. Please could tell me how I can pass this syntax for iptables to ipfw. iptables -A OUTPUT -p tcp --dport 80 -m state --state NEW -m recent --set --name thor --rdest -j ACCEPT iptables -A INPUT -p tcp -m tcp --tcp-flag RST RST -m state --state ESTABLISHED -m recent...

3. IP Networking

iptables: syntax from drop AND log packets

Good afternoon everyone, It's the iptables n00b again. valiantly learning and reading (and asking for occasional help when I hit a wall - which I think I just did) So far I've gotten logging enabled for iptables. Now, I want to drop AND log an IP connection attempt. Could some wise eyes...

4. IP Networking

iptables syntax

Hi, Can someone help to explain what is --to-source in the iptables rule below: iptables -t nat -A POSTROUTING -s 192.168.1.100 -o eth0 \ -j SNAT --to-source 97.158.253.26 especially why the option has double dash (--) is it a comment? Thanks

5. IP Networking

How to stack Cisco 2960-S and Cisco 2960X?

Is there an easy way to stack Cisco 2960-S and Cisco 2960X switches? If you have no idea, follow this: 1. Stacking is not supported on switches running the LAN Lite image. All switches in the stack must be running the LAN Base image. 2. In a mixed stack of Catalyst 2960-X and Catalyst 2960-S...

LEARN ABOUT XFREE86

glusphere

GLUSPHERE(3G)															     GLUSPHERE(3G)

NAME

       gluSphere - draw a sphere

C SPECIFICATION

       void gluSphere( GLUquadric* quad,
		       GLdouble radius,
		       GLint slices,
		       GLint stacks )

PARAMETERS

       quad    Specifies the quadrics object (created with gluNewQuadric).

       radius  Specifies the radius of the sphere.

       slices  Specifies the number of subdivisions around the z axis (similar to lines of longitude).

       stacks  Specifies the number of subdivisions along the z axis (similar to lines of latitude).

DESCRIPTION

       gluSphere  draws  a sphere of the given radius centered around the origin. The sphere is subdivided around the z axis into slices and along
       the z axis into stacks (similar to lines of longitude and latitude).

       If the orientation is set to GLU_OUTSIDE (with gluQuadricOrientation), then any normals generated point away from the center of the sphere.
       Otherwise, they point toward the center of the sphere.

       If texturing is turned on (with gluQuadricTexture), then texture coordinates are generated so that t ranges from 0.0 at z=-radius to 1.0 at
       z=radius (t increases linearly along longitudinal lines), and s ranges from 0.0 at the +y axis, to 0.25 at the +x axis, to 0.5  at  the	-y
       axis, to 0.75 at the -x axis, and back to 1.0 at the +y axis.

SEE ALSO

       gluCylinder(3G), gluDisk(3G), gluNewQuadric(3G), gluPartialDisk(3G), gluQuadricOrientation(3G), gluQuadricTexture(3G)

																     GLUSPHERE(3G)