10-25-2013
I've done this quite a few times on UFS and I believe the same general procedure will work for ZFS as well. When you're creating the zpool, use the following paramater 'zpool create your_pool_name /dev/dsk/emcpower29a' and not ''zpool create your_pool_name /dev/dsk/c5t50000975F0002581d20s0'.
Or, if you've already tried that, please post the output you used to create the zpool. That's probably the best place to start.
10 More Discussions You Might Find Interesting
1. Filesystems, Disks and Memory
We currently have a Solaris box connected to a Clariion storage system that is utilising DMP for path failover. I would prefer to use EMC's Powerpath and was wondering if the two can coexist?
Basically, I am struggling to find any documentation on the subject and was wonder if anyone can give me... (2 Replies)
Discussion started by: aaron2k
2 Replies
2. Linux
Hi all,
Currently i am involved in developing a device driver for a custom hardware.
My linux stack already has the sysfs directory structure
/sys/class/hwmon/
My need is that, while loading my device driver i need to create a "xyz" sysfs directory inside hwmon sysfs directory as... (0 Replies)
Discussion started by: cbalu
0 Replies
3. Solaris
Friends,
Could u please clarify how does a Solaris 10 machine recognize a SATA hard disk, SATA CD/DVD drives.
Will it recognize it like a SCSI? eg.c0t0d0 or like ide ? eg.c0d0
thank u. (11 Replies)
Discussion started by: saagar
11 Replies
4. Red Hat
Hi ,
I have a redhat 5.3 server which has 2 vg.. one is rootvg in local harddisk and another one is applicationvg in SAN.. When I reboot the server , EMC powerpath driver is not starting up automatically. Hence applicationvg is not mounting properly. Therefore I need to unmount it manually and... (4 Replies)
Discussion started by: Makri
4 Replies
5. Emergency UNIX and Linux Support
Dear All,
I was having powerpath 5.2 on SUN server with SVM connected to CLARIION box.Please find the following output :
root # powermt display dev=all
Pseudo name=emcpower3a
CLARiiON ID=CK200073400372
Logical device ID=60060160685D1E004DD97FB647BFDC11
state=alive; policy=CLAROpt;... (1 Reply)
Discussion started by: Reboot
1 Replies
6. Solaris
I saved one of my zfs snapshot on the remote machine with following command. And now i want to restore the same snapshot to original server how can i receive it on the original server from backup server.
#zfs send rpool/ROOT/sol10_patched@preConfig | ssh x.x.x.x zfs receive... (1 Reply)
Discussion started by: fugitive
1 Replies
7. AIX
I'm trying to auto-mount EMC Symmetrix BCV device at boot.
but having problem making BCV available.
I put script called mkbcv to the inittab and engineer suggested to add
120 sec sleep between cfgmgr so I did that also.
My mkbcv script seems to be working fine, it says "hdisk4 Available" ... (1 Reply)
Discussion started by: shuhei365
1 Replies
8. Linux
Hello guys, I'm going crazy over here with a problem with a LUN created on a EMC CX3.
I did sucessfully managed to create the LUN on the Storage (the LUN is named DBLNX25EC_TST), after doing the following process:
echo "1" > /sys/class/fc_host/host<n>/issue_lip
and
echo "- - -" >... (10 Replies)
Discussion started by: Zarnick
10 Replies
9. Solaris
It seems like I lost one path on my Solaris-11 box. But I want to make sure before going to Storage team, if issue is from OS side or Storage side. Storage team is able to see that only one wwwn is looged in their switch. I am not at server's physical location. What does below output says ? I... (0 Replies)
Discussion started by: solaris_1977
0 Replies
10. Solaris
Hello All
I’ve made the decision to switch my storage server from FreeNAS to Solaris. I opted to use FreeNAS as it has ZFS and until BTRFS is stable, it’s the best option (IMHO) for backup and network storage.
The switch was facilitated by the USB stick that FreeNAS was on got lost during a... (1 Reply)
Discussion started by: BlueDalek
1 Replies