gnutv(1)						      General Commands Manual							  gnutv(1)

NAME

       gnutv - a digital tv utility.

SYNOPSIS

       gnutv [options]<channelname>

DESCRIPTION

       This manual page documents briefly the gnutv commands.

       gnutv is a digital tv utility.

OPTIONS

       -adapter <id>
	      adapter to use (default 0)

       -frontend <id>
	      frontend to use (default 0)

       -demux <id>
	      demux to use (default 0)

       -caslotnum <id>
	      ca slot number to use (default 0)

       -channels <filename>
	      channels.conf file

       -secfile <filename>
	      Optional sec.conf file

       -secid <secid>
	      ID  of  the SEC configuration to use, one of:	 * UNIVERSAL (default) - Europe, 10800 to 11800 MHz and 11600 to 12700 Mhz,   Dual
	      LO, loband 9750, hiband 10600 MHz      * DBS - Expressvu, North America, 12200 to 12700 MHz, Single LO, 11250 MHz      * STANDARD  -
	      10945  to 11450 Mhz, Single LO, 10000 Mhz      * ENHANCED - Astra, 10700 to 11700 MHz, Single LO, 9750 MHz      * C-BAND - Big Dish,
	      3700 to 4200 MHz, Single LO, 5150 Mhz	 * C-MULTI - Big Dish - Multipoint LNBf, 3700 to 4200 MHz, Dual LO,  H:5150MHz,  V:5750MHz
		   * One of the sec definitions from the secfile if supplied

       -out decoder
	      Output to hardware decoder (default)

       -out decoderabypass
	      Output to hardware decoder using audio bypass -out dvr Output stream to dvr device -out null Do not output anything -out stdout Out-
	      put to stdout -out file <filename> Output stream to file -out udp <address> <port> Output stream	to  address:port  using  udp  -out
	      udpif <address> <port> <interface> Output stream to address:port using udp forcing the specified interface -out rtp <address> <port>
	      Output stream to address:port using udp-rtp -out rtpif <address> <port> <interface> Output  stream  to  address:port  using  udp-rtp
	      forcing the specified interface

       -timeout <secs>
	      Number of seconds to output channel for (0=>exit immediately after successful tuning, default is to output forever)

       -cammenu
	      Show the CAM menu

       -nomoveca
	      Do not attempt to move CA descriptors from stream to programme level -h print this help text

       This manual page was written by Uwe Bugla <uwe.bugla@gmx.de>.

								 February 14, 2010							  gnutv(1)