Sponsored Content
Operating Systems Solaris Server M4000 server lost connectivity to storagetek 2540 Post 302865353 by hicksd8 on Friday 18th of October 2013 08:04:05 AM
Old 10-18-2013
The first thing to try is to re-seat the Fibre Channel cables between the StorageTek and the Sun.

Next, can you connect to the StorageTek console to check that it's alive?
 

10 More Discussions You Might Find Interesting

1. Solaris

Sun Sparc T2000 + StorageTek 2540 - Help, I'm lost

I have a Sun Sparc T2000 (Solaris 10 05-08) and have installed a PCI-X 4GB Single Port HBA card in it. I have one StorageTek 2540 array that I would like to connect to the T2000. For the moment it would be a single path connection, but I've ordered a 2nd HBA, so eventually it would be... (4 Replies)
Discussion started by: soliberus
4 Replies

2. Solaris

One StorageTek 6140 vs Two (2) 2540 's?

We're moving our production 3510FC to development, so we need to replace the production 3510FC. The 6140 is nice, but pricey. Here's the question: Would two 2540's (RAID 10) be 'faster' than one 3510? (RAID 10) and faster than one 6140 (RAID 10)? One StoregeTek 6140 (16x72GB 15k rpm fc-al... (12 Replies)
Discussion started by: buddhavelvet
12 Replies

3. UNIX for Dummies Questions & Answers

Help with restarting SUN m4000 server

I'm trying to power on our SUN m4000 server after a recent shutdown. When I try to connect to the xscf console I'm getting prompted for a password. The system is not asking for a login just a password. Below is the output from the xscf console. Anyone know how I can safely get back to the... (0 Replies)
Discussion started by: orahi001
0 Replies

4. Solaris

Sun StorageTek 2540 - shutdown matrix

Hi, I have a simple question on how to correctly disable the matrix? Looking for the Common Array Manager and I do not see this option... Thank for help (3 Replies)
Discussion started by: bieszczaders
3 Replies

5. Solaris

Storagetek 2540

Hi peeps, Was wondering if anyone can help me, got a couple of storagetek 2540's that I need to configure. Trouble is I think they were brought as second user as all that came with them was cables. Does anyone know how to configure them (i.e. create raid sets and map to Luns and present... (1 Reply)
Discussion started by: callmebob
1 Replies

6. Hardware

Storagetek 2540

Hello all ! I am a beginner about system and networking , and after some research on internet , i didn't find any relevant information , so i post here , if someone have an experience with this kind of material or if some documentation about how to connect my storage device on my server. I... (2 Replies)
Discussion started by: acorradi
2 Replies

7. Solaris

M4000 Server Issue

Dear Team, This time i am facing some problems in Sun SPARC M4000 server. I have a doubt, when we are upgrading the firmware if XSCF , the OBP is also upgraded. What about server OBP, Is that upgardation need to be done separately ? what about DVD-ROM, HARD DISK firmware.... (3 Replies)
Discussion started by: sudhansu
3 Replies

8. Hardware

StorageTek 2540 battery failed

Hi all, My Sun StorageTek 2540 have redundant batteries, but a battery was failed. # /opt/SUNWstkcam/bin/sscs list -d MyStorage1 fru Name FRU Alarm State Status Revision Unique Id -------------------------- ----------- --------... (2 Replies)
Discussion started by: buyantugs
2 Replies

9. Hardware

Storagetek 2540

Hi Guys and Gals, Wionder if you could help me, got a problem with a controller on a storagetek 2540, dead when fully powered up but if you reboot, it is ok for a couple of seconds (and you can ping it). Then once the array is fully up, it goes faulty and is un-pingable. Had anyone... (4 Replies)
Discussion started by: callmebob
4 Replies

10. Solaris

StorageTek 2540 SAN array

Bought a Sun StorageTek 2540 SAN array a few years ago from a company that was going out of business. When we first set it up, we were able to get all the software (Common Array Manager) and firmware directly from Sun. We just upgraded the drives, but the array is too large for the firmware. Now... (6 Replies)
Discussion started by: edison303
6 Replies
network-test(1) 						  ifupdown-extra						   network-test(1)

NAME
network-test - check the network and test if everything is fine SYNOPSIS
network-test DESCRIPTION
The network-test program will test your system's network configuration using basic tests and providing both information (INFO), warnings (WARN) and possible errors (ERR) based on the results of these tests. It will check and report on: * Status of the network interfaces of the system including: link status, IP addressing and number of transmitted packets and error rates. * Accessibility to configured routes to external networks, including the default network route, checking the routers configured to give access to the network * Proper host resolution, testing DNS resolution against a known host. * Proper network connectivity, testing reachability of remote hosts using ICMP and simulating a web connections to a remote web server (the web server used for the tests can be configured through the environment, see below) The program does not need special privileges to run as it does not do any system change. However, the behaviour of the program when running as an unprivileged user is not the same as running as system administrator (i.e. root). If the program is run as system administrator it will try to run some tools that are only available to it to speed up some of the tests. The program relies on the use of ip, netstat, ifconfig, arp and (when running as root) ethtool or mii-tool, to obtain information about the system's networking configuration (status of available interfaces and configured network routes). It also uses ping, host and nc (netcat) to do tests of the network connectivity and ensure that the host can connect to the Internet. ENVIRONMENT
The program will, by default, check www.debian.org and its associated web server. If you want to use a different check host you can setup the environment as follows: CHECK_HOST The name of a host to use when testing DNS resolution. CHECK_IP_ADRESS The IP address of the host defined in CHECK_HOST CHECK_WEB_HOST The web server to use for testing purposes when testing network connectivity. CHECK_WEB_PORT The web server port of server CHECK_WEB_HOST that will be used for testing. EXIT STATUS
The program will exit with error (1) if any of the network checks fail. BUGS
This program does not have super cow powers so it is unable to fix the errors by itself. It is also unable to detect if the network is failing due to a local firewall policy been in place so make sure you check your system logs with dmesg (1) to detect if some of the active tests are being dropped due to your local firewall. Other known issues that might make the program not work reliable are: * IPv6: The program does not yet explicitly handle IPv6 only hosts, some of the tests might be biased towards IPv4 and might fail in IPv6 environments. * Proxies: The program does not check network connectivity for hosts that connect through the Internet using a proxy gateway for services. The program might report issues in hosts using proxies even when these might connect to the Internet properly through proxied services. * Firewall environments: some of the tests rely on direct connectivity to external hosts, which are tested using ICMP queries (through the use of ping. These tests might fail in hosts installed in networking environments with firewalls that block outbound ICMP communication. SEE ALSO
ip (8), netstat (8), ifconfig (8), ethtool (8), mii-tool (8), ping (8), nc (1) and host (1). AUTHOR
network-test was written by Javier Fernandez-Sanguino for the Debian GNU/Linux distribution. COPYRIGHT AND LICENCE
Copyright (C) 2005-2011 Javier Fernandez-Sanguino <jfs@debian.org>. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. On Debian systems, a copy of the GNU General Public License may be found in /usr/share/common-licenses/GPL. ifupdown-extra August 23 2011 network-test(1)
All times are GMT -4. The time now is 01:45 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy