Install the ldm tools and check the asked command.
D'oh! Thanks....
So, I really just need a simple, bare metal OS install. No ldoms needed.
---------- Post updated at 08:19 AM ---------- Previous update was at 08:12 AM ----------
Just a quick note, I successfully ran the following command
ldm list output now shows 15g ram available to the primary. I'd still like to revert to a simple install. Did I use the wrong installation media?
Hi,
I have t5120 sparc and I have 2 146 G drives in the system. I will be installing solaris 10 and also want the system mirrored using Hardware RAID "1"
The System did come preinstalled as it comes from sun. I did not do much on it.
I booted system using boot cdrom -s
gave format... (6 Replies)
Hi,
I am using 3 t5120 sparc systems, OS solaris 10.
I am confused by update manager behaviour and sun support.
Sun support guy, tells me install patch : 136932-09 (#136932-09: Hardware/PROM: SPARC Enterprise T5120 & T5220 Sun System Firmware with LDOMS support)
When I checked... (4 Replies)
Hi,
I have problem creating hardware raid on T5120 with 4 disks. After the hardware raid 1 created, then I used the raidctl -l c1t0d0 and raidctl -l c1t2d0
the output of volume c1t0d0 contain disk 0.0.0 0.1.0, also the volume c1t2d0 contain disk 0.0.0 0.1.0 and should be 0.2.0 0.3.0
so I... (15 Replies)
Good Day,
We have bought Sun Sparc Enterprise T5120 with pre-installed Solaris 10 Sparc
But i need on this server Solaris 9. I have inserted in to DVD-rom (USB DVD-rom) with Solaris 9 for Sparc.
Then log into shell and type: reboot -- cdrom.
System rebooted and i have this message:
... (3 Replies)
hi all, i have a problem with a sun server, since a while the root password has been lost and now that we need to give maintenance to the services hosted in it, we cant access it, i tried a method to change it by booting from cd but i cant direct the server to boot from the cd. (The server is on... (3 Replies)
greetings.
im a very new user to solaris (and to servers for that matter) and i need to conect to a t5120 sun server, i tried using the SER-MGT port on the back of the server, then to a rj-45/db-9 adaptor, and to a serial-usb adaptor (my laptop doesn't have a com port).
when i try to conect with... (2 Replies)
Hi everyone
I've just purchased a Sun T5120 server with 2 internal disks. I've configured hardware RAID (mirror) and as a result the device tree in Solaris only contains 1 hard drive.
My question is, how would I know when one of the drives become faulty?
Thanks (2 Replies)
I have a T5120 server and we found out on a security scan that the web interface for the ILOM is enabled. I have been trying to find this information in the wonderful documentation but have not been successful.
Does anyone know if you need the http/https enabled on the ILOM for the serial... (4 Replies)
I have 2machines, 1 T5120 and 1 T5240. Just wandering everytime we have powershutdown, I need to connect thru SP console to boot the T5120. The other machine T5240 is ok and can boot normally after I press the power button. On T5120, no matter how I press the power button, it just stays there,... (3 Replies)
Discussion started by: lhareigh890
3 Replies
LEARN ABOUT SUNOS
install-solaris
install-solaris(1M)install-solaris(1M)NAME
install-solaris - install the Solaris operating system
SYNOPSIS
install-solaris
install-solaris invokes the Solaris Install program. Depending on graphical capability and available memory at the time of invocation,
install-solaris invokes either a text-based installer or a graphical installer.
The following minimum requirements for physical memory dictate which features are available during installation:
For SPARC machines:
128 MB
Minimum physical memory for all installation types
128 MB
Minimum physical memory required for windowing system
384 MB
Minimum physical memory required for graphical-based installation
For x86 machines:
256 MB
Minimum physical memory for all installation types
256 MB
Minimum physical memory required for windowing system
512 MB
Minimum physical memory required for graphical-based installation
In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number of fea-
tures available.
install-solaris exists only on the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the for more
details.
install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
installation media. Refer to the for disk space requirements.
Refer to the for more information on the various menus and selections.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcdrom (Solaris instal- |
| |lation media) |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
pkginfo(1), install(1M), pkgadd(1M), attributes(5)
It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.
23 Sep 2005 install-solaris(1M)