GPR(1)							      General Commands Manual							    GPR(1)

NAME

       gpr - a graphical frontend for lpr.

SYNOPSIS

       gpr [-h] [--help] [-P <printer>]  [-J <job name>] [-r] [-n] [-p <flag>]	[filename]...

DESCRIPTION

       gpr  is	a  graphical  interface  to lpr that provides for easy configuration of printer-specific options. gpr interfaces with a PostScript
       printer's PPD file to create a user-interface of configurable options. Based upon user choice, the  device-specific  option  code  is  then
       inserted  into the PostScript job and sent to the printer.  This can be used to tell the printer to duplex or staple the print job, or tell
       it what paper tray to draw paper from.  NOTE: gpr will detect if the file to be print is postscript, and, if not, it will call a2ps to pre-
       process it before sending it to ppdfilt and to lpr.

OPTIONS

       gpr accepts the following options:

       -h, --help
	      Show summary of options.

       -P     Specify a destination printer

       -d     Enable debugging output

       -J     lpr option: Job name to print on burst page

       -r     lpr option: Remove the files upon completion of spooling

       -n     gpr option: Print the command line rather than executing the command

       -p

	      gpr option: Use ppdfilt: 0 = Never, 1 = Always, 2 = with non-default PPD

OTHER INFO

       The webpage for the GNULpr suite is at http://lpr.sf.org.

SEE ALSO

       lpr(1),

																	    GPR(1)