Hi folks,
The server time is no tgetiing synched up with the NTP server.
I tried ntpdate -u <ipadress> this is not working. please help out.
regards,
Sag. (7 Replies)
Ok, I have 4 production systems. There is one NTP server for all four systems. In each system there is one Solaris 10 box that points to that NTP server. All of the other machines in the system point to the Solaris 10 machine to get their time sync.
All four Solaris 10 machines have essentially... (2 Replies)
Hi,
My Linux VMs are running on citrix XEN.Somehow the time drift is too high (going very fast). Even if the correct time configured using date -s command, for every 1 hr it is differing almost 5 - 10 mins.
Tried configuring ntpd (local NTP server) and still it is not synchronized.
Machine... (2 Replies)
Hi folks, I have developed a Linux server for my customer. After migrating the server to my customer site, I was trying to sync its time to the NTP time servers at my customer site.
Below is the ntp.conf:
% vi /etc/ntp.conf
# Permit time synchronization with our time source, but do not
# permit... (2 Replies)
Hi All,
I deployed the rhel7 server in the bare metal hardware. I want to configure the rhel7 server to sync time with bios. I tired the below commands. Still it did not sync the time with bios.
Thanks,
Kalai (3 Replies)
Hi
I have a requirement to rsync from remote to local machine via ssh and sync files that are changed in last n hours.
pgrep to check if no other sync is running
pgrep -f rsync.*/opt > /dev/null || rsync --bwlimit=10000 -avz --delete root@X.X.X.X:/var/source/ /opt/dest/ >> /home/log 2>&1... (0 Replies)
Hello,
We have Windows 10 machine connected to Sparc T5440 server via serial cable.
We access the server from the Windows 10 machine using putty via serial connection. This allows us to access ILOM and Unix.
We have recently noticed that whenever we reboot the windows machine (Windows 10),... (11 Replies)
Discussion started by: jasonu
11 Replies
LEARN ABOUT MOJAVE
glwaitsync
GLWAITSYNC(3G) OpenGL 3.3 GLWAITSYNC(3G)NAME
glWaitSync - instruct the GL server to block until the specified sync object becomes signaled
C SPECIFICATION
void glWaitSync(GLsync sync, GLbitfield flags, GLuint64 timeout);
PARAMETERS
sync
Specifies the sync object whose status to wait on.
flags
A bitfield controlling the command flushing behavior. flags may be zero.
timeout
Specifies the timeout that the server should wait before continuing. timeout must be GL_TIMEOUT_IGNORED.
DESCRIPTION
glWaitSync causes the GL server to block and wait until sync becomes signaled. sync is the name of an existing sync object upon which to
wait. flags and timeout are currently not used and must be set to zero and the special value GL_TIMEOUT_IGNORED, respectively[1].
glWaitSync will always wait no longer than an implementation-dependent timeout. The duration of this timeout in nanoseconds may be queried
by calling glGet() with the parameter GL_MAX_SERVER_WAIT_TIMEOUT. There is currently no way to determine whether glWaitSync unblocked
because the timeout expired or because the sync object being waited on was signaled.
If an error occurs, glWaitSync does not cause the GL server to block.
NOTES
glWaitSync is available only if the GL version is 3.2 or higher.
ERRORS
GL_INVALID_OPERATION is generated if sync is not the name of a sync object.
GL_INVALID_VALUE is generated if flags is not zero.
GL_INVALID_VALUE is generated if timeout is not GL_TIMEOUT_IGNORED.
SEE ALSO
glFenceSync(), glClientWaitSync()
COPYRIGHT
Copyright (C) 2010 Khronos Group. This material may be distributed subject to the terms and conditions set forth in the Open Publication
License, v 1.0, 8 June 1999. http://opencontent.org/openpub/.
NOTES
1. flags and timeout are placeholders for anticipated future extensions of sync object capabilities. They must have these reserved values
in order that existing code calling glWaitSync operate properly in the presence of such extensions.
OpenGL 3.3 03/08/2011 GLWAITSYNC(3G)