FATAL: system is not bootable, boot command is disabled
Dear all,
I Need your help,my server v240 with sun solaris 10 can't remote login.I try conncet via rsc and then go to OK prom....and i get the status :
I confuse,what can i do to clear this cases?
thx
FG
Last edited by Scott; 09-23-2013 at 01:02 AM..
Reason: Use code tags, please
Hi all, need your help again :P
I am trying to build a server in work, and it comes up with the OBP (Open Boot Prompt) and when i try and install the cdrom
"boot cdrom -s"
it throws back the following error:
"System is not bootable, boot command is disabled"
This is trying to install... (3 Replies)
In our HP/Unix system, our master scsi drive was bootable and our mirrored drive was non-bootable. Are any of these alternatives possible:
1) Make the non-bootable scsi drive bootable? How?
2) Create a bootable scsi drive, then copy the mirrored data to the newly created scsi drive?
I seek... (1 Reply)
Dear brothers.
i tried so many times to install openssl-0.9.8g in x86 machine. i have done ./config without any error notification. when i execute the make command i am having the same error
fatal error: Command failed for target `build_crypto'.
i installed c compiler the verson of... (1 Reply)
Hi,
I want to know the command for finding out the list of active/disabled users in Linux System.
Model:x86_64. Rev:2.6.9
Thanks in advance for your help
Mike (1 Reply)
Hi
I need to export a directory named /sybase from my solaris machine via NFS. The svcs command shows the state as disabled. Please let me know how to export the directory.
Once the directory is exported from the solaris machine it has to be mounted locally in an aix machine. Can some one... (2 Replies)
I have a few Solaris 10 boxes that when I reboot then cron gets disabled. I can do
svcadm enable cron
and the service start fine and run until I reboot and then it gets disabled.
svc:/system/cron:default (clock daemon (cron))
State: disabled since Thu Dec 01 10:40:48 2011
Reason:... (7 Replies)
Hi,
Firstly, I want to say hello to all of you guys. My first post here... I have issue with CentOS and I hope that there is someone who can help or even explain what could cause this kind of situation.
I have installed CentOS 5.7 x86_64 into Hyper-V (Windows Server 2012 R2) environment. After... (0 Replies)
I'm under huge pressure to recover data from an old server that only gets booted very infrequently. The data on it is urgently required - isn't always??!
..
Server is an HP DL380G5 which is running SCO Unixware 7.11
..
It has 3 partitions in a RAID 5 Configuration: 1 of 10GB (I assume it... (19 Replies)
Today, I noticed some errors in our SSL cert renewal log files, mostly related to domains where the IP address had changed. Concerned about this, rebuilt out SSL cert, which normally goes well without a hiccup.
However, for today, for some reason which I cannot explain, there was a PHP error... (0 Replies)
spawn ssh oracle@$myserver $mycommand
match_max 100000
expect "*?assword:*"
send "$v_password\r"
send "\r"
expect eof
I run this code above and got the error.
spawn: fatal: do not run this command by hand
Thanks (3 Replies)
Discussion started by: zam
3 Replies
LEARN ABOUT HPUX
vxbootsetup
vxbootsetup(1M)vxbootsetup(1M)NAME
vxbootsetup - set up system boot information on a Veritas Volume Manager disk
SYNOPSIS
/etc/vx/bin/vxbootsetup [-g diskgroup] [medianame ... ]
DESCRIPTION
The vxbootsetup utility configures physical disks so that they can be used to boot the system. Before vxbootsetup is called to configure a
disk, the required volumes, standvol, rootvol and swapvol (and optionally, dumpvol) must be created on the disk. All of these volumes must
be contiguous with only one subdisk.
The -g option may be used to specify the boot disk group.
If no medianame arguments are specified, all disks that contain usable mirrors of the root, swap, /usr and /var volumes are configured to
be bootable.
If medianame arguments are given, only the disks that are associated with the specified disk names are configured to be bootable.
vxbootsetup requires that:
o The root volume must be named rootvol and must have a usage type of root.
o The swap volume must be named swapvol and must have a usage type of swap.
o The volumes containing /usr and /var (if any) must be named usr and var, respectively.
See the chapter "Recovery from Boot Disk Failure" in the Veritas Volume Manager Troubleshooting Guide for detailed information on how the
system boots and how VxVM impacts the system boot process. The vxmirror, vxrootmir, and vxresize utilities call vxbootsetup automatically.
If you use vxassist, or vxmake and vxplex to create mirrors of the root volume on a disk, you must run vxbootsetup explicitly to make the
disk bootable.
ARGUMENTS
medianame
Specifies the disk name (disk media name) of a VM disk that is to be configured as bootable.
SEE ALSO disksetup(1M), edvtoc(1M), vxassist(1M), vxevac(1M), vxinstall(1M), vxintro(1M), vxmake(1M), vxmirror(1M), vxplex(1M), vxresize(1M),
vxrootmir(1M)
Veritas Volume Manager Troubleshooting Guide
VxVM 5.0.31.1 24 Mar 2008 vxbootsetup(1M)