Hi.
i was wondering if anyone can show me or direct me on setting up a ntp server under redhat.. Is there any howtos so i can get familar to it "any good sites" (3 Replies)
All,
How do you set a Solaris 9 server which received ntp updates from a ntp server to broadcast them on a local subnet. I have created a /etc/inet/ntp.conf file to receive the updates from a server on network and need to make this server become like a ntp relay from the main server.
Any... (1 Reply)
Hi All....
I need to configure NTP server in my network, which is heterogeneous, containing Linux as well as windows systems. I'm planning to configure it on RHEL 5.0. What are the prerequisites for this and do I need to register this server?
Can anyone give me as many information as... (1 Reply)
All here, thank you for listening. Now I've set up a Linux NTP server by adding a external windows NTP server in /etc/ntp.conf. Then I start the ntpd daemon. But how often does the Linux NTP server update its time with the external NTP server? I've looked up everywhere but found no information... (1 Reply)
hello Guys,
I have an NTP problem on my SUN N240 server. External NTP server is being used for this box and when i run 'ntpq -p' i get connection refused message;
ntpq -p
ntpq: read: Connection refused
Here this is the ntp.conf file:
cat /etc/ntp.conf
# BEGIN NTP SERVERS
server... (6 Replies)
Hi,
I have two ntp servers in my cluster and I want all the nodes in my cluster to sync with either of the ntp servers or just one. Unfortunately it keep rotating the sync, between my ntp server 1, ntp server 2 and local. Is there anyway I can change the sync to avoid local?
# ntpq -p
... (3 Replies)
HI Admin,
We are facing a weird issue with NTP. A physical server RHEL 5.11 is migrated as P2V. NTP was running & clocks are in sync on source server before migration.
After the SVMotion, On the target Linux guest, the ntpd is not able to sync with any of the clocks except local. Forcefully... (1 Reply)
Hi All
Appreciate your help.
Here is the scenario:
1. Five months back we configured md5 authentication with network devices and NTP server and it worked fine.
2.Last week all of a sudden the network devices are out of sync.
3.We changed the md5 key and it started working.
... (0 Replies)
Hello
I need to create NTP server for all my devices, What is the best OS for NTP Server? "CentOS, Redhat, Ubuntu "
I tried before Ubuntu but some of device not detect the server
Need your recommendation
Thank you (2 Replies)
Discussion started by: moudmm
2 Replies
LEARN ABOUT OSX
localemanager
localemanager(8) BSD System Manager's Manual localemanager(8)NAME
localemanager -- Configure OpenDirectory Server Locales
SYNOPSIS
localemanager operation [-l localename] [-subnet 1.2.3.4/5] [-server servername] [-i IP address]
DESCRIPTION
localemanager creates, destroys, and edits OpenDirectory Server Locale information. Locales are collections of OpenDirectory servers to
assist clients in locating the nearest OpenDirectory Server.
To use OpenDirectory Server Locales, simply create a locale on an OD server with the createLocale operation. Then add servers and subnets to
the locale. All localemanager operations are performed on the local OpenDirectory node.
The first time a locale is created, a DefaultLocale will automatically be created as well. The DefaultLocale will be used for any clients
that don't match a subnet in any other locale.
Before a locale can be configured, the server must already be an OpenDirectory server.
Locales can be defined on each of the OD servers or on a single OD server in the group of OD master/replicas. For the latter, the locale
information will get replicated to all of the other servers but locales will need to be "enabled" on the other servers by running the command
localemanager enableLocales.
Commands:
help Displays the commands and options.
createLocale Creates a new locale on the local OD server. This command requires the -l option.
deleteLocale Deletes a locale from the local OD server. This command requires the -l option.
showLocale Displays the current locale(s). The -l option can be used to display a specific locale. If -l is not specified, all locales
are displayed.
enableLocales
Enables the use of locales on an OD server. This command is automatically run the first time any localemanager command is run
on an OD server. Therefore this command only needs to be run if no other localemanager commands have been (or will be) run on
this server.
addSubnet Adds a new subnet to the specified locale. This command requires the -l -subnet options.
removeSubnet Removes a subnet from the specified locale. This command requires -l -subnet options.
addServer Adds a server to the specified locale. This command requires the -l -server options. If the -i option is specified, that IP
address will be used by locale clients. This may be useful for multi-homed servers to restrict locale clients to a specific
network interface. If the -i option is not specified the IP address(es) will be looked up.
removeServer Removes a server from the specified locale. This command requires -l -server options. If the -i option is specified, only
that IP address will be removed from the locale. If the -i option is no specified, all of the server's IP addresses will be
removed from the locale.
Options:
-l locale Locale name.
-subnet 192.168.0.0/16
Subnet specified in CIDR notation.
-server server.example.com
Server fully-qualified domain name.
-i 192.168.1.1
Use this IP address for the server. Typically used to limit locale clients to a specific interface on a multi-homed server.
FILES
/var/log/localemanager.log localemanager log file.
SEE ALSO slapconfig(8)HISTORY
First introduced in Mac OS X 10.7
Darwin June 2, 2019 Darwin