I installed Openserver 5.0.7 and I cannot telnet to the localhost and I can't telnet from my old SCO 3.2.42 to the new SCO machine but I can ping the new machine and it will telnet to the old machine. (2 Replies)
Hi there,
Anything will help.
I have running server on computer and want to connect from some clients.
Server:
memset(&hints, 0, sizeof(hints));
hints.ai_family = domain;
hints.ai_socktype = SOCK_STREAM;
error = getaddrinfo("localhost", "8300", &hints, &res0);
if (error)
{
... (1 Reply)
Hi Everyone,
Good day.
Scenario:
2 unix servers -- A (SunOS) and B (AIX)
I have an ftp script to sftp 30 files from A to B which happen almost instantaneously i.e 30 sftp's happen at the same time.
Some of these sftp's fail with the following error:
ssh_exchange_identification: Connection... (1 Reply)
OS : Solaris sparc
In c program After socket created when I do Connect() it results "Connection refused", but the system is online and I am able to do telnet, ping everything, but it says connection refused.
What would need to correct ? (6 Replies)
Hi everyone,
I am hoping anyone of you could help me in this weird problem we have in 1 of our Solaris 10 servers. Lately, we have been having some ftp problems in this server. Though it can ping any server within the network, it seems that it can only ftp to a select few. For most servers, the... (4 Replies)
I dont' what happened with my servers (test servers only) but I just noticed that suddenly I cannot up the domain anymore (Sun Java System Application Server 9.1_01).
a. server.log
org.postgresql.util.PSQLException: Connection refused. Check that the hostname and port are correct and that the... (1 Reply)
Hi- While trying ftp from AIX to Windows im getting below error. Can anyone share ur views on this topic.
root@AB101# ftp -n 10.192.168.68
ftp: connect: A remote host refused an attempted connect operation.
ftp>
Thanks. (3 Replies)
I have two computers running Debian 6.0 and one running Solaris 2.6 on a private network. The Debian computers can ftp to the Solaris computer but if a Debian computer is the destination the ftp connection is refused. I assume this is some security feature of Debian. What can I do to allow... (2 Replies)
Hi everybody,
I am running a program on a supercomputer via my personal computer through a ssh connection. My program take more than a day to run, so when I left work with my PC I stop the connection with the supercomputer and the program stop.
I am wondering if someone know how I can manage... (2 Replies)
Discussion started by: TomTomGre
2 Replies
LEARN ABOUT OSF1
ports
ports(7) Miscellaneous Information Manual ports(7)NAME
ports, port_names - Device (tty and lp) names for serial and parallel ports
SYNOPSIS
Default Serial Ports:
/dev/tty00
/dev/tty01 (not present on a single-port system)
Parallel Port:
/dev/lp0
DESCRIPTION
AlphaStation and AlphaServer systems provide one or two 9-pin serial communication ports. These ports are usually labelled 1 (COMM1) and 2
(COMM2), but they may be identified by different icons. Using the appropriate serial cable and terminator, you can connect a serial
printer, external modem, or character-cell terminal to a serial port. Most AlphaStation and AlphaServer systems also provide one parallel
port, for use with a parallel printer.
When you add a device to your system, the installation documentation may instruct you to map the device pathname to the port. These
devices are located in the /dev directory.
For serial-line ports, the two default device pathnames are: This pathname always maps to 1, COMM1, the lowest port number, an icon for a
terminal console, or the only serial port (on a single-port system). This pathname always maps to 2, COMM2, the next numbered port, or (if
one serial port is labeled with an icon for a terminal console) the remaining serial port.
If your system hardware has been extended to include additional serial ports, the pathnames /dev/tty02, /dev/tty03, and so forth, may also
be available to you. However, most systems have only /dev/tty00 and /dev/tty01 as the device pathnames for serial ports.
The one parallel port on an AlphaStation or AlphaServer may be labeled with the word printer or a printer icon. On some systems, the paral-
lel port may not be labeled. The device pathname for the parallel port is /dev/lp0. Currently, Tru64 UNIX does not fully support parallel
printers, so fewer devices are connected to this port as compared to serial ports.
If you are connecting a terminal console to your system, it must be connected to the serial port mapped to /dev/tty00. For other serial
devices, it does not matter which of the serial ports you choose for the connection. For example, suppose you are setting up a system that
has two serial ports, labeled 1 and 2. You intend to use a serial-line terminal rather than a workstation monitor as the system console and
also want to connect a serial-line printer to the system. In this case, you must connect the terminal to the port labeled 1 (with the
device pathname /dev/tty00). Therefore, you must connect the printer to the remaining port labeled 2 (with the device pathname /dev/tty01).
If, for the same type of system, you intend to use a workstation monitor as the system console, it does not matter which serial port you
use for a serial-line printer or modem. In other words, you can connect the printer to either port 1 (with pathname /dev/tty00) or port 2
(with pathname /dev/tty01). When prompted to enter a /dev/tty** pathname by the lprsetup script or the Print configuration tool in the CDE
Application Manager, you would specify /dev/tty00 if you connected the printer to port 1 or /dev/tty01 if you connected the printer to port
2.
See the System Administration manual for more information on setting up consoles (including remote consoles) and printers. See the
modem(7) reference page for more information on setting up modems.
SEE ALSO
Commands: lprsetup(8)
Devices: ace(7), modem(7)
System Administration delim off
ports(7)