Printing lines with specific strings at specific columns Post: 302850437

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Printing lines with specific awk NF

I have this files: ./frm/lf_mt1_cd.Ic_cell_template.attr ./die/addgen_tb_pumd.Ic_cell_template.attr ./min_m1_n.Ic_cell_template.attr When I use: awk -F\/ '{print NF}' Would result to: 3 3 2 I would like to list the files with 3 fields on it. Any Suggestions?

2. Shell Programming and Scripting

Selecting specific 'id's from lines and columns using 'SED' or 'AWK'

Hello experts, I am new to this group and to 'SED' and 'AWK'. I have data (text file) with 5 columns (C_1-5) and 100s of lines (only 10 lines are shown below as an example). I have to find or select only the id numbers (C-1) of specific lines with '90' in the same line (of C_3) AND with '20' in...

3. Shell Programming and Scripting

Printing several lines of a file after a specific expression

Hello, I want to print a number of lines of a file after a specific expression of a line. I have this sed command but it prints only 1 line after the expression. How could I adapt it to print for instance 10 lines after or 15 lines after ? sed -n '/regexp/{n;p;}' Thx & Regs, Rany.

4. Shell Programming and Scripting

Printing all lines before a specific string and a custom message 2 lines after

Hello all, I need to print all the lines before a specific string and print a custom message 2 lines after that. So far I have managed to print everything up the string, inclusively, but I can't figure out how to print the 2 lines after that and the custom message. My code thus far is:...

5. UNIX for Dummies Questions & Answers

sort comma separated lines by specific columns

Hello, I have a file which lines' words are comma separated: aa, bb, cc, uu b, ee, ff bb, cc, zz, ee, ss, kk oo, bb, hh, uu a, xx, ww tt, aa, dd, yy aa, gg I want to sort first by second column and in case of tie by fourth column with sort command. So the output would be: ...

6. Shell Programming and Scripting

Can't figure out how to find specific characters in specific columns

I am trying to find a specific set of characters in a long file. I only want to find the characters in column 265 for 4 bytes. Is there a search for that? I tried cut but couldn't get it to work. Ex. I want to find '9999' in column 265 for 4 bytes. If it is in there, I want it to print...

7. Shell Programming and Scripting

Printing next two lines from a file after grepping a specific pattern

Hi I have a file like # vi require.txt 1,BANK,Read blocks that cycle. yellow Read blocks. 2,ACCOUNT,Finished Red Finished . 3,LOAN, pipe white pipe 4,PROFIT,Resolve. black Resolve Am using like cat require.txt | grep -w ACCOUNTThe output I get is

8. UNIX for Dummies Questions & Answers

Quick UNIX command to display specific lines in the middle of a file from/to specific word

This could be a really dummy question. I have a log text file. What unix command to extract line from specific string to another specific string. Is it something similar to?: more +/"string" file_name Thanks

9. UNIX for Dummies Questions & Answers

Cutting specific columns from lines

I am trying to remove columns 81-97 from a line that can be as long as 114 characters. Because a number of lines might not have under 80 characters, using the cut command following by paste could be a problem. While sed might work, is there some other utility that could do this more easily? ...

10. Shell Programming and Scripting

Printing multiple lines on the same line between specific text

This is an extract from a large file. The lines that start with fc are ports on a fabric switch. In between each fc port there is information about the port. fc2/12 is up Port description is SEIEDISCOVER-3 Speed is 4 Gbps fc2/13 is down (Administratively down) fc2/14 is up Port...

LEARN ABOUT SUSE

irsend

IRSEND(1)								FSF								 IRSEND(1)

NAME

       irsend - basic LIRC program to send infra-red commands

SYNOPSIS

       irsend [options] DIRECTIVE REMOTE CODE [CODE...]

DESCRIPTION

       Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
       as TV boxes, HiFi sets, etc.

       DIRECTIVE can be:
	  SEND_ONCE	    - send CODE [CODE ...] once
	  SEND_START	    - start repeating CODE
	  SEND_STOP	    - stop repeating CODE
	  LIST		    - list configured remote items
	  SET_TRANSMITTERS  - set transmitters NUM [NUM ...]
	  SIMULATE	    - simulate IR event

       REMOTE is the name of a remote, as described in the lircd configuration file.

       CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.

       NUM is the transmitter number of the hardware device.

       For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:

	  LIST	 ""    ""   - list all configured remote names
	  LIST REMOTE  ""   - list all codes of REMOTE
	  LIST REMOTE CODE  - list only CODE of REMOTE

       The SIMULATE command only works if it has been explicitly enabled in lircd.

       -h --help
	      display usage summary

       -v --version
	      display version

       -d --device
	      use given lircd socket [/var/run/lirc/lircd]

       -a --address=host[:port]
	      connect to lircd at this address

       -# --count=n
	      send command n times

EXAMPLES

	  irsend LIST DenonTuner ""
	  irsend SEND_ONCE  DenonTuner PROG-SCAN
	  irsend SEND_ONCE  OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
	  irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
	  irsend SEND_STOP  OnkyoAmpli VOL-DOWN
	  irsend SET_TRANSMITTERS 1
	  irsend SET_TRANSMITTERS 1 3 4
	  irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"

FILES

       /etc/lirc/lircd.conf
	      Default lircd configuration file.  It should contain all the remotes, their infra-red codes and the corresponding timing	and  wave-
	      form details.

DIAGNOSTICS

       If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
       "irsend: could not connect to socket"
       "irsend: Connection refused" (or "Permission denied").

SEE ALSO

       The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.

       lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.

irsend 0.8.7pre1						     May 2010								 IRSEND(1)

10 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

Printing lines with specific awk NF

Discussion started by: jehrome_rando

2. Shell Programming and Scripting

Selecting specific 'id's from lines and columns using 'SED' or 'AWK'

Discussion started by: kamskamu

3. Shell Programming and Scripting

Printing several lines of a file after a specific expression

Discussion started by: rany1

4. Shell Programming and Scripting

Printing all lines before a specific string and a custom message 2 lines after

Discussion started by: SEinT