Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: IBM AIX - SAN Storage DS4300 issue
Operating Systems AIX IBM AIX - SAN Storage DS4300 issue Post 302849517 by filosophizer on Monday 2nd of September 2013 03:53:49 AM
Old 09-02-2013
okay, few things,

first remember, I was unable to see the HBAs when I connected directly to the SAN Storage.
That is: PORT 0 of DUAL PORT HBA connected to Controller A
PORT 1 of DUAL PORT HBA connected to Controller B
in my DS SAN Storage Client Manager I was unable to see the HBA

What I did was, in my AIX machine
Code:
rmdev -Rdl fcs0
rmdev -Rdl fcs1
cfgmgr -v

Refresh in Storage Client Manager and I was able to see the HBAs

Next thing,
I connected after that I connected my single fiber adapter card which is Dual Port HBA as such
HBA Port 0 ---- Controller A
HBA Port 1 ---- Controller B

Did refresh on the SAN Storage Client Software and I was able to see both Ports
Port 0 : 20:00:00:00:c9:61:2e:fa
Port 1 : 20:00:00:00:c9:61:2e:f9

I tried creating only one zone
Cabling as such:
Port 0 of the Dual Port HBA is connected to SAN Switch Port 0
SAN Switch Port 8 is connected to Controller A of the SAN Storage
Now details about the ports
SAN SWITCH PORT 0: Port WWN 20:00:00:05:1e:34:47:37
HBA Port 0 : Device Port WWN [10:00:00:00:c9:61:2e:f9]
Device Node WWN [20:00:00:00:c9:61:2e:f9]



SAN Switch Port #8: Port WWN 20:08:00:05:1e:34:47:37

Devices
Device Port WWN [20:0a:00:a0:b8:12:3b:3e]
Device Node WWN [20:0a:00:a0:b8:12:3b:3d]

Currently effective configuration on the Fabric: test_zc

Zone DB Max size for the fabric - 1048576 bytes

Zone DB to be committed - 0 bytes

You have defined the following zoning database:

Aliases:
test:
Emulex Corporation 20:00:00:00:c9:61:2e:f9 Symbios Logic Inc. 20:0a:00:a0:b8:12:3b:3d

Zones:
test_z:
test

Configurations:
test_zc:
test_z


The Effective Configuration is: test_zc

The Member(s) of the Effective Configuration is (are):

Zone: test_z 20:00:00:00:c9:61:2e:f9
20:0a:00:a0:b8:12:3b:3d

Code:
# cfgmgr
Method error (/usr/lib/methods/cfgefscsi -l fscsi1 ):
        0514-061 Cannot find a child device.

unable to see the disk added from SAN storage

I am wondering if I have done it properly ?
 

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

AIX 5.2 and DS4300 Storage

Hello, We're setting up a solution for a group of customers with 2 p520 servers and 1 DS4300 unit with 9 disks (at this stage). The meaning is to create two arrays on the DS4300. Both servers will be connected to the DS4300 unit and to both controllers (e.g. Controller 1 connected to server 1... (0 Replies)
Discussion started by: EricBE
0 Replies

2. Filesystems, Disks and Memory

AIX and DS4300 Storage Unit

Hello, We're setting up a solution for a group of customers with 2 p520 servers and 1 DS4300 unit with 9 disks (at this stage). The meaning is to create two arrays on the DS4300. Both servers will be connected to the DS4300 unit and to both controllers (e.g. Controller 1 connected to server 1... (0 Replies)
Discussion started by: EricBE
0 Replies

3. AIX

ibm san cache battery with aix

Hi All, I would like to share this incident that happened the other day. I have a question with this, https://www.unix.com/aix/64921-create-new-vg-san-rename-fs.html And I thought it's related to the above link but the problem was the ibm san 4300 cache battery was dead and I need to click... (2 Replies)
Discussion started by: itik
2 Replies

4. AIX

IBM FastT600 SAN - RAID 5 Storage Manager Client v08.33.G5.03 - Recovery?

To summarize the problem: The "IBM FastT Storage Manager Client v8" shows that our Disk Farm is arranged into 6 logical drives each in a RAID 5 configuration. This software also shows that 5 of the 6 logical drives (from Disk Farm) are in a error state: "Failed Logical Drive - Drive Failure".... (1 Reply)
Discussion started by: aix-olympics
1 Replies

5. AIX

IBM SAN Storage DS4700 - Copy Mirror Flashcopy

Hello, Does anyone know how to copy SAN Storage logical disks from IBM TotalStorage Software. I have a SAN Logical Disk of 200GB mounted on my AIX LPAR_1 via fibre channel fcs0 I would like to make an exact copy of the SAN Logical Disk from IBM totalStorage and mount it on AIX LPAR_2 ... (4 Replies)
Discussion started by: filosophizer
4 Replies

6. AIX

MPIO RDAC IBM SAN STORAGE DS4700 ?

Hello, I have AIX 6.1 with TL 4 and it is connected to IBM SAN STORAGE DS4700 After assigning some disks from SAN to AIX, I can see the disks in my AIX as hdisk2 Available 05-00-02 MPIO Other DS4K Array Disk hdisk3 Available 05-00-02 MPIO Other DS4K Array Disk But it should... (0 Replies)
Discussion started by: filosophizer
0 Replies

7. Solaris

Cannot see the IBM SAN storage

HI all, I had recently change the Server storage from EMC to the IBM SAN. but after the configuration, the IBM success to see the server HBA port and successfully assign a LUN for the server. When i go to the server, and restarted it. i use the "format" command to check, but din see any... (1 Reply)
Discussion started by: SmartAntz
1 Replies

8. AIX

IBM SAN storage -- cache battery

Hello, I have IBM SAN STORAGE DS4100 and one of the cache battery for the controller is dead. Suddenly the performance has been degraded and access to SAN disks ( reading and writing ) became very slow ? My query: Replacing the battery will take 6 days, so in the mean time what are the ways... (1 Reply)
Discussion started by: filosophizer
1 Replies

9. AIX

IBM SAN STORAGE HOT SPARE DISK

Hello, I have DS4000 IBM SAN Storage ( aka FastT Storage ) One of my disks has failed and I had a hot spare disk covering all the arrays. As the disk failed, immediately the hotspare disk took over the failed disk ( see the JPEG in the attachment ) My Question: How can I make the hotspare... (1 Reply)
Discussion started by: filosophizer
1 Replies

LEARN ABOUT SUNOS

fcinfo

fcinfo(1M)																fcinfo(1M)

NAME

       fcinfo - Fibre Channel HBA Port Command Line Interface

SYNOPSIS

       fcinfo hba-port [-l] [HBA_port_WWN...]

       fcinfo  remote-port [-ls] [-p HBA_port_WWN] [REMOTE_port_WWN...]

       fcinfo [-V]

       fcinfo [-?]

       fcinfo  is  a  command  line interface that collects administrative information on fibre channel host bus adapter (HBA) ports on a host. It
       also collects data on any fibre channel targets that may be connected to those ports in a Storage Area Network (SAN).

   SUBCOMMANDS
       The following subcommands are supported:

       hba-port

	   Lists information for the HBA port referenced by the specified HBA_port_WWN. If HBA_port_WWN is not specified, all  fibre  channel  HBA
	   ports on the host will be listed.

       remote-port

	   Lists  the remote-port information for those remote ports that are specified. If no REMOTE_port_WWN is specified, all remote ports that
	   are visible through HBA_port_WWN are listed.

OPTIONS

       The following options are supported:

       -l, --linkstat

	   Lists the link error statistics information for the port referenced by the specified HBA_port_WWN or REMOTE_port_WWN.

       -p HBA_port_WWN, --port HBA_port_WWN

	   Retrieve remote port information from the HBA_port_WWN of the local HBA port on the host. The -p option  can  only  be  used  with  the
	   remote-port subcommand and is a mandatory option.

       -s, --scsi-target

	   Lists  the SCSI target information for all remote ports the user has asked for. The -p, --port option must always be specified and must
	   be a valid HBA port on the host. This HBA port will be used as the initiator for which to retrieve the SCSI level  target  information.
	   Note that this will only function on remote port fibre channel World-Wide Names that support an FC4 type of SCSI.

       -V, --version

	   Prints the version information.

       -?, --help

	   Prints the usage information.

EXAMPLES

       Example 1: Listing all HBA ports

       The following command lists all fibre channel HBA ports on the host:

       # fcinfo hba-port

       HBA Port WWN: 210000e08b074cb5
	       OS Device Name: /dev/cfg/c1
	       Manufacturer: QLogic Corp.
	       Model: 375-3108-xx
	       Type: N-port
	       State: online
	       Supported Speeds: 1Gb 2Gb
	       Current Speed: 2Gb
	       Node WWN: 200000e08b074cb5
       HBA Port WWN: 210100e08b274cb5
	       OS Device Name: /dev/cfg/c2
	       Manufacturer: QLogic Corp.
	       Model: 375-3108-xx
	       Type: N-port
	       State: online
	       Supported Speeds: 1Gb 2Gb
	       Current Speed: 2Gb
	       Node WWN: 200100e08b274cb5
       HBA Port WWN: 210000e08b072ab5
	       OS Device Name: /dev/cfg/c3
	       Manufacturer: QLogic Corp.
	       Model: 375-3108-xx
	       Type: L-port
	       State: online
	       Supported Speeds: 1Gb 2Gb
	       Current Speed: 2Gb
	       Node WWN: 200000e08b072ab5
       HBA Port WWN: 210100e08b272ab5
	       OS Device Name: /dev/cfg/c4
	       Manufacturer: QLogic Corp.
	       Model: 375-3108-xx
	       Type: N-port
	       State: online
	       Supported Speeds: 1Gb 2Gb
	       Current Speed: 2Gb
	       Node WWN: 200100e08b272ab5

       Example 2: Listing HBA ports and link statistics

       The following command lists information for the HBA ports and the link statistics for those ports:

       # fcinfo hba-port -l 210000e08b074cb5 210100e08b274cb5

       HBA Port WWN: 210000e08b074cb5
	       OS Device Name: /dev/cfg/c1
	       Manufacturer: QLogic Corp.
	       Model: 375-3108-xx
	       Type: N-port
	       State: online
	       Supported Speeds: 1Gb 2Gb
	       Current Speed: 2Gb
	       Node WWN: 200000e08b074cb5
	       Link Error Statistics:
		       Link Failure Count: 0
		       Loss of Sync Count: 0
		       Loss of Signal Count: 0
		       Primitive Seq Protocol Error Count: 0
		       Invalid Tx Word Count: 0
		       Invalid CRC Count: 0
       HBA Port WWN: 210100e08b274cb5
	       OS Device Name: /dev/cfg/c2
	       Manufacturer: QLogic Corp.
	       Model: 375-3108-xx
	       Type: N-port
	       State: online
	       Supported Speeds: 1Gb 2Gb
	       Current Speed: 2Gb
	       Node WWN: 200100e08b274cb5
	       Link Error Statistics:
		       Link Failure Count: 0
		       Loss of Sync Count: 0
		       Loss of Signal Count: 0
		       Primitive Seq Protocol Error Count: 0
		       Invalid Tx Word Count: 0
		       Invalid CRC Count: 0

       Example 3: Listing all remote ports

       The following command lists all remote ports that are visible through the given HBA port:

       # fcinfo remote-port -p 210100e08b274cb5

       Remote Port WWN: 50020f230000b4af
	       Active FC4 Types: SCSI
	       SCSI Target: yes
	       Node WWN: 50020f200000b4af
       Remote Port WWN: 210000e08b07daa6
	       Active FC4 Types: SCSI
	       SCSI Target: no
	       Node WWN: 200000e08b07daa6
       Remote Port WWN: 20030003ba27c788
	       Active FC4 Types: SCSI
	       SCSI Target: yes
	       Node WWN: 10000003ba27c788
       Remote Port WWN: 210000e08b096a60
	       Active FC4 Types: SCSI,IP
	       SCSI Target: no
	       Node WWN: 200000e08b096a60

       Example 4: Listing remote ports and link statistics

       The following command lists information for the remote ports and the link statistics for those ports:

       # fcinfo remote-port -l -p 210100e08b272ab5

       Remote Port WWN: 210100e08b296a60
	       Active FC4 Types: SCSI,IP
	       SCSI Target: no
	       Node WWN: 200100e08b296a60
	       Link Error Statistics:
		       Link Failure Count: 0
		       Loss of Sync Count: 0
		       Loss of Signal Count: 0
		       Primitive Seq Protocol Error Count: 0
		       Invalid Tx Word Count: 0
		       Invalid CRC Count: 0
       Remote Port WWN: 20030003ba27d56d
	       Active FC4 Types: SCSI
	       SCSI Target: yes
	       Node WWN: 10000003ba27d56d
	       Link Error Statistics:
		       Link Failure Count: 0
		       Loss of Sync Count: 4765165
		       Loss of Signal Count: 4765165
		       Primitive Seq Protocol Error Count: 0
		       Invalid Tx Word Count: 0
		       Invalid CRC Count: 0
       Remote Port WWN: 210100e08b27f7a6
	       Active FC4 Types: SCSI
	       SCSI Target: no
	       Node WWN: 200100e08b27f7a6
	       Link Error Statistics:
		       Link Failure Count: 0
		       Loss of Sync Count: 0
		       Loss of Signal Count: 0
		       Primitive Seq Protocol Error Count: 0
		       Invalid Tx Word Count: 0
		       Invalid CRC Count: 0
       Remote Port WWN: 50020f230000b897
	       Active FC4 Types: SCSI
	       SCSI Target: yes
	       Node WWN: 50020f200000b897
	       Link Error Statistics:
		       Link Failure Count: 0
		       Loss of Sync Count: 7
		       Loss of Signal Count: 7
		       Primitive Seq Protocol Error Count: 0
		       Invalid Tx Word Count: 0
		       Invalid CRC Count: 0
       Remote Port WWN: 210100e08b27daa6
	       Active FC4 Types: SCSI
	       SCSI Target: no
	       Node WWN: 200100e08b27daa6
	       Link Error Statistics:
		       Link Failure Count: 0
		       Loss of Sync Count: 0
		       Loss of Signal Count: 0
		       Primitive Seq Protocol Error Count: 0
		       Invalid Tx Word Count: 0
		       Invalid CRC Count: 0
       Remote Port WWN: 210000e08b074cb5
	       Active FC4 Types: SCSI,IP
	       SCSI Target: no
	       Node WWN: 200000e08b074cb5
	       Link Error Statistics:
		       Link Failure Count: 0
		       Loss of Sync Count: 0
		       Loss of Signal Count: 0
		       Primitive Seq Protocol Error Count: 0
		       Invalid Tx Word Count: 0
		       Invalid CRC Count: 0
       Remote Port WWN: 210100e08b296060
	       Active FC4 Types: SCSI
	       SCSI Target: no
	       Node WWN: 200100e08b296060
	       Link Error Statistics:
		       Link Failure Count: 0
		       Loss of Sync Count: 0
		       Loss of Signal Count: 0
		       Primitive Seq Protocol Error Count: 0
		       Invalid Tx Word Count: 0
		       Invalid CRC Count: 0

       Example 5: Listing all SCSI targets and link statistics

       The following command lists all remote ports as well as the link statistics and scsi-target information:

       # fcinfo remote-port  -sl -p 210100e08b272ab5

       Remote Port WWN: 210100e08b296a60
	       Active FC4 Types: SCSI,IP
	       SCSI Target: no
	       Node WWN: 200100e08b296a60
	       Link Error Statistics:
		       Link Failure Count: 0
		       Loss of Sync Count: 0
		       Loss of Signal Count: 0
		       Primitive Seq Protocol Error Count: 0
		       Invalid Tx Word Count: 0
		       Invalid CRC Count: 0
       Remote Port WWN: 20030003ba27d56d
	       Active FC4 Types: SCSI
	       SCSI Target: yes
	       Node WWN: 10000003ba27d56d
	       Link Error Statistics:
		       Link Failure Count: 0
		       Loss of Sync Count: 4765165
		       Loss of Signal Count: 4765165
		       Primitive Seq Protocol Error Count: 0
		       Invalid Tx Word Count: 0
		       Invalid CRC Count: 0
	       LUN: 0
		 Vendor: SUN
		 Product: T4
		 OS Device Name: /dev/rdsk/c4t20030003BA27D56Dd0s2
	       LUN: 1
		 Vendor: SUN
		 Product: T4
		 OS Device Name: /dev/rdsk/c4t20030003BA27D56Dd1s2
       Remote Port WWN: 210100e08b27f7a6
	       Active FC4 Types: SCSI
	       SCSI Target: no
	       Node WWN: 200100e08b27f7a6
	       Link Error Statistics:
		       Link Failure Count: 0
		       Loss of Sync Count: 0
		       Loss of Signal Count: 0
		       Primitive Seq Protocol Error Count: 0
		       Invalid Tx Word Count: 0
		       Invalid CRC Count: 0
       Remote Port WWN: 50020f230000b897
	       Active FC4 Types: SCSI
	       SCSI Target: yes
	       Node WWN: 50020f200000b897
	       Link Error Statistics:
		       Link Failure Count: 0
		       Loss of Sync Count: 7
		       Loss of Signal Count: 7
		       Primitive Seq Protocol Error Count: 0
		       Invalid Tx Word Count: 0
		       Invalid CRC Count: 0
	       LUN: 0
		 Vendor: SUN
		 Product: T300
		 OS Device Name: Unknown
	       LUN: 1
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d1s2
	       LUN: 2
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d2s2
	       LUN: 3
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d3s2
	       LUN: 4
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d4s2
	       LUN: 5
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d5s2
	       LUN: 6
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d6s2
	       LUN: 7
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d7s2
	       LUN: 8
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d8s2
	       LUN: 9
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d9s2
	       LUN: 10
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d10s2
	       LUN: 11
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d11s2
	       LUN: 12
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d12s2
	       LUN: 13
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d13s2
	       LUN: 14
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d14s2
	       LUN: 15
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d15s2
       Remote Port WWN: 210100e08b27daa6
	       Active FC4 Types: SCSI
	       SCSI Target: no
	       Node WWN: 200100e08b27daa6
	       Link Error Statistics:
		       Link Failure Count: 0
		       Loss of Sync Count: 0
		       Loss of Signal Count: 0
		       Primitive Seq Protocol Error Count: 0
		       Invalid Tx Word Count: 0
		       Invalid CRC Count: 0
       Remote Port WWN: 210000e08b074cb5
	       Active FC4 Types: SCSI,IP
	       SCSI Target: no
	       Node WWN: 200000e08b074cb5
	       Link Error Statistics:
		       Link Failure Count: 0
		       Loss of Sync Count: 0
		       Loss of Signal Count: 0
		       Primitive Seq Protocol Error Count: 0
		       Invalid Tx Word Count: 0
		       Invalid CRC Count: 0
       Remote Port WWN: 210100e08b296060
	       Active FC4 Types: SCSI
	       SCSI Target: no
	       Node WWN: 200100e08b296060
	       Link Error Statistics:
		       Link Failure Count: 0
		       Loss of Sync Count: 0
		       Loss of Signal Count: 0
		       Primitive Seq Protocol Error Count: 0
		       Invalid Tx Word Count: 0
		       Invalid CRC Count: 0

       Example 6: Listing SCSI target information

       The following command lists all remote ports as well as the scsi-target information:

       # fcinfo remote-port  -s -p 210100e08b272ab5

       Remote Port WWN: 210100e08b296a60
	       Active FC4 Types: SCSI,IP
	       SCSI Target: no
	       Node WWN: 200100e08b296a60
       Remote Port WWN: 20030003ba27d56d
	       Active FC4 Types: SCSI
	       SCSI Target: yes
	       Node WWN: 10000003ba27d56d
	       LUN: 0
		 Vendor: SUN
		 Product: T4
		 OS Device Name: /dev/rdsk/c4t20030003BA27D56Dd0s2
	       LUN: 1
		 Vendor: SUN
		 Product: T4
		 OS Device Name: /dev/rdsk/c4t20030003BA27D56Dd1s2
       Remote Port WWN: 210100e08b27f7a6
	       Active FC4 Types: SCSI
	       SCSI Target: no
	       Node WWN: 200100e08b27f7a6
       Remote Port WWN: 50020f230000b897
	       Active FC4 Types: SCSI
	       SCSI Target: yes
	       Node WWN: 50020f200000b897
	       LUN: 0
		 Vendor: SUN
		 Product: T300
		 OS Device Name: Unknown
	       LUN: 1
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d1s2
	       LUN: 2
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d2s2
	       LUN: 3
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d3s2
	       LUN: 4
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d4s2
	       LUN: 5
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d5s2
	       LUN: 6
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d6s2
	       LUN: 7
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d7s2
	       LUN: 8
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d8s2
	       LUN: 9
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d9s2
	       LUN: 10
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d10s2
	       LUN: 11
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d11s2
	       LUN: 12
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d12s2
	       LUN: 13
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d13s2
	       LUN: 14
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d14s2
	       LUN: 15
		 Vendor: SUN
		 Product: T300
		 OS Device Name: /dev/rdsk/c4t50020F230000B897d15s2
       Remote Port WWN: 210100e08b27daa6
	       Active FC4 Types: SCSI
	       SCSI Target: no
	       Node WWN: 200100e08b27daa6
       Remote Port WWN: 210000e08b074cb5
	       Active FC4 Types: SCSI,IP
	       SCSI Target: no
	       Node WWN: 200000e08b074cb5
       Remote Port WWN: 210100e08b296060
	       Active FC4 Types: SCSI
	       SCSI Target: no
	       Node WWN: 200100e08b296060

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNW			   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+

       attributes(5)

ERROR MESSAGES

       Errors that can occur in addition to the errors normally associated with system administration commands:

       HBA_port_WWN: not found

       REMOTE_port_WWN: not found

								    17 Feb 2005 							fcinfo(1M)
All times are GMT -4. The time now is 02:37 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy