08-29-2013
It is connected via Serial Port. COM 1 on the Dell Poweredge R310 box to the Serial TTYA port on the T5220. Once those are connected I plug in the power cords to the T5220s and wait for it to fully boot up.
---------- Post updated at 03:07 PM ---------- Previous update was at 02:50 PM ----------
Putty is configured at the setting 9600 baud, 8 bits, no parity, 1 stop bit, no handshaking.
10 More Discussions You Might Find Interesting
1. Solaris
Hi!
Does anybody got some experiences with the Sun Server T5210 or T5220?
-> especially in network configuration!
Thanks...
BYE (2 Replies)
Discussion started by: kaufmoa
2 Replies
2. Solaris
Hello, I'm trying to fix this server System Board (CPU/Memory Unit). The error indicates that its missing 3.3VDC. So far all the fuses and caps have been checked. I new at this type of machine, need help for idea on this system. Thank you in advance.
Vu (0 Replies)
Discussion started by: vhtran
0 Replies
3. Solaris
so i've grabbed this sun netra t1 for some small dev work. now obviously i need to install sol10. no problem done it a million times except for the fact that i've never actually done it w/o a term server. so i grab a usb to serial and a serial to rj45 (the one you get in every cisco order.. roll... (24 Replies)
Discussion started by: pupp
24 Replies
4. Solaris
Hi guys. I have an old Netra T1 that I'm hoping to recover here so I can twiddle around with Solaris 10.
It's been unable to power on despite issuing the "poweron" command or hitting the switch at the back of the server for some time. The LOM command "env" reports ALARM3 ON and everything else... (8 Replies)
Discussion started by: detach8
8 Replies
5. Solaris
Hi,
When I am trying to boot my SUN Netra 240 Machine its giving some boot error.
> {1} ok boot -i
> Boot device: /pci@1c,600000/scsi@2/disk@0,0:a File and args: -i
> Boot load failed.
> The file just loaded does not appear to be executable.
> {1} ok
I tried to boot it from cdrom... (9 Replies)
Discussion started by: ppandey21
9 Replies
6. Solaris
I have a new Netra T5220 that came preinstalled OS 10. The purpose is to be a backup server to store images of other Server Blades. There are three systems that will be storing their backups. Per engineering documents and with the vendor system it is determined that we needed somewhere around 300... (3 Replies)
Discussion started by: udubya
3 Replies
7. Hardware
Hello all,
I've been researching this to no avail, I have a T5220 running firmware 7.2.2.e (139442-06)
However, the issue I have is that I want to update the firmware yet Oracle maintains 3 different sets of firmware for the T5220:
7.2.x = (139442-14) Being the latest at 7.2.11.a;... (4 Replies)
Discussion started by: seckure
4 Replies
8. Hardware
As the title suggests, I'm trying to install a second drive (really want an OS mirror) on a Sun Netra X1.
I've taken the spacer out, and had a go at with the drill-press so now I have a nice HDD tray. Have installed an IDE drive in the tray, plugged in the power and data cables that were... (0 Replies)
Discussion started by: Smiling Dragon
0 Replies
9. Solaris
Hi Guys,
Could someone please share the dvd/cd that came with server Netra x4200 M2 since it is not more available in Oracle site? Or do you know where I can get that?
Thanks! (4 Replies)
Discussion started by: CristianS
4 Replies
10. Solaris
hi:)
i can't boot my sun server by iso solaris 10 sparc dvd that i did download from oracle site.
my hardware is sun T5220.
i receive these after running boot cdrom -s :
can't read disk lable
can't open disk lable package
ERROR: boot-read fail
whould u help me?
Please use CODE... (1 Reply)
Discussion started by: Arefdel
1 Replies
LEARN ABOUT OSF1
pset_assign_pid
pset_assign_pid(1) General Commands Manual pset_assign_pid(1)
NAME
pset_assign_pid - Assigns a process ID to a processor set
SYNOPSIS
/usr/sbin/pset_assign_pid [-x] pset_id pid [pid...]
OPTIONS
Assigns exclusive use of the target processor set to each specified process identification number.
DESCRIPTION
The pset_assign_pid command assigns one or more process identification numbers to an existing processor set. The pset_id variable is a
unique integer that identifies the processor set and is returned by the pset_create command. The pid variable is the process identification
number, which is a unique integer that identifies the process. Each process identification number that is assigned is removed from its cur-
rent processor set.
Use the -x option to assign exclusive use of the processor set. If the processor set is already in use, a message is displayed, and the
command terminates without performing the assignment. If the exclusive assignment succeeds, new requests by other processes for assign-
ments to the specified processor set (pset_id) are denied.
SEE ALSO
Commands: pset_destroy(1), pset_create(1), pset_assign_cpu(1), pset_info(1)
Files: processor_sets(4)
pset_assign_pid(1)