Can't boot from CD. Post: 302846611

9 More Discussions You Might Find Interesting

1. Red Hat

linux will not boot, boot to grub prompt

my redhat 9 will not boot. We had a power failure and when the power came back, my redhat linux will not boot. The machine come up to grub prompt. I tried the following from grub prompt root (hd0, then press tab key partition num:0 filesystem type unknown, partition type 0x83...

2. UNIX for Advanced & Expert Users

Cannot boot - Boot : Panic : File size out of range (EWS-UX/V unix)

Hey ! I am running EWS-UX/V (Rel 4.2) on NEC EWS/4800/330 station and I am having problems rebooting my station : I am getting the following message on display : BOOT : PANIC : File size out of range. According to user guide, this error is occuring when a file exceeding the limit and/or...

3. Solaris

solaris boot problem boot error loading interpreter(misc/krtld)

When I installed the SOLARIS 10 OS first time, the desktop would not start up, this was because of network setup. Reinstalled worked. After a week due to some problem I had to reinstall OS, installation went fine and but when i reboot I get this error. cannot find mis/krtld boot error loading...

4. Solaris

cannot find boot device and won't boot off cdrom

I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me...

5. SCO

stage 1 boot failure: error loading hd (40)/boot

hi SCO Unix 5.0.6 doesn't boot due to this problem: not a directory boot not found cannot open stage 1 boot failure: error loading hd (40)/boot Knows someone howto solve it?

6. Boot Loaders

Reboot and Select Proper Boot device or insert Boot media in select Boot device and press a key

Hello, I have kubuntu on my laptop and now I decided to switch to Windows 7. I made the bios settings properly (first choice is boot from cd\vd) but I see the error " reboot and select proper Boot device or insert Boot media in select Boot device and press a key " I have tried CD and...

7. Solaris

Solaris x86 installation using jumpstart does not local boot ( boot from hdd)

I am trying to install Solaris x86 using the Jumpstart server. I run the add_install_client command with appropriate options, and reboot my x86 Target box. The installation starts fine and unattended. After the installation completes and the target goes for a re-boot, it does not boot from the HDD...

8. Solaris

How to specify local boot up disk in CD boot Grub?

Hi Solaris 10 Experts, I am wondering what is the correct syntax to edit in Grub when trying to specify the local ZFS boot disk while booting up from a Solaris 10 x86 64bits DVD installation disk. In other word, I try to boot up from local disk without removing the Solaris installation disk...

9. Solaris

Solaris stuck during boot after reconfigure boot

Hello, I have a problem with my machine that won't boot properly. The story is that I installed a software called apcupsd, which is a control application for my APC battery UPS. I have used version 3.14.10 earlier, but as part of restoring my previously crashed os harddrive I wanted to...

LEARN ABOUT SUNOS

installboot

installboot(1M) 														   installboot(1M)

NAME

       installboot - install bootblocks in a disk partition

SYNOPSIS

       installboot bootblk raw-disk-device

       The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.

       The  ufs  boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
       found using the -i option of uname(1).

       The installboot utility is a SPARC only program. It is not supported on the  architecture.  users should use installgrub(1M) instead.

       bootblk	       The name of the bootblock code.

       raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is  read-
		       able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.

       Example 1: Installing UFS Boot Block

       To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:

	      example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk 
		   /dev/rdsk/c1t0d0s0

       /usr/platform/platform-name/lib/fs/ufs

	   directory where ufs boot objects reside.

       /platform/platform-name/ufsboot

	   second level program to boot from a disk or CD

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+

       od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)

WARNINGS

       The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.

								    11 Apr 2005 						   installboot(1M)