XMODE2(1)								FSF								 XMODE2(1)

NAME

       mode2, smode2, xmode2 - shows the pulse/space length of infrared signals

SYNOPSIS

       xmode2 [options]

DESCRIPTION

       The  main purpose of these programs is to check operation of your home-brew LIRC receiver hardware and to see the IR waveform of the remote
       controller without an expensive oscilloscope. Very useful for debugging. Of course this program won't work with hardware that  decodes  the
       signals itself like e.g. TV cards or the Irman.

       xmode2  is  based on smode2 by Sinkovics Zoltan. It is just a conversion from svga to X with some basic support for resizing. The only dif-
       ferences are that the --mode option enables an alternative display mode and that xmode2 can read and visualise mode2 output from stdin.

       -h --help
	      display usage summary

       -v --version
	      display version

       -d --device=device
	      read from given device

       -H --driver=driver
	      use given driver

       -g --geometry=geometry window geometry

       -t --timediv=value
	      ms per unit

       -m --mode
	      enable alternative display mode

       -r --raw
	      access device directly

SEE ALSO

       mode2(1), smode2(1), xmode2(1)

       The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.

xmode2 0.8.7pre1						     May 2010								 XMODE2(1)