Yes indeed, you are correct.
But, again there are few things you have to consider before creating SEA, you mentioned that these are Blade Servers, so how are you viewing them, through HMC or IVM? How many VIOS you have on each Blade?
If you have only one VIO on each blade, then SEA holds no good, coz it won't failover. If you have two VIOS, then only you are good to go for SEA.
Now, considering you have two VIOS, we have to figure out which virtual adapter (out of the 4) is your primary adapter and which is control channel adapter. You can check the profile (of virtual adapter) if a adapter has been check as access external network, and given a trunking priority then it is your primary adapter, for control channel adapter you WONT select access external network, and most shops give it a vlan no of 99 (purely environment based, so such standard), so as to distinguish control channel adapter from others.
You cannot use smitty (in rksh), you have to use mkdev command to create SEA.
$ mkvdev -sea "real adapt" -vadapter "primary virt adapt" -default "primary virt adapt" -defaultid "PVID" -attr ha_mode=auto ctrl_chan="control channel adapt"
Hope this helps.
Yes this is IBM Blades.
- I am using IVM.
- Just one VIO is installed.
So in that case having just one VIOs which is the option for high availability when one physical NIC fails?
Hello,
When I try to upgrade AIX from 5.1 to 5.3 I get this error message
20EE0008 : No adapters found Adapter, Riser, System Bd.
Anyone know anything about it ? (1 Reply)
Hi,
I want to know wheather partition size for installation of vio client can be specified on vio server
example
If I am installing vio server on blade with 2*300gb hard disk,after that I want to create 2 vio client (AIX Operating system) wheather I can specify hard disk size while... (1 Reply)
Hi
I have 4 NIC's connected to my RHEL 5.3 server. Two on one subnet creating bond0, and two on a second subnet which create bond1. Both bonds are set to use DHCP to obtain IP addresses. Here is the config file for ifcfg-bond0:
DHCP_HOSTNAME=rrnltshckvmx001
DEVICE=bond0
BOOTPROTO=dhcp... (2 Replies)
Hi all,
I set up the following configuration on my system:
- An LPar with a virtual adapter, first one with a vlan id=703 and id port=13.
- The first adapter have to connect to a VIOS in which i configured an SEA.
So, the VA is set up on interface ent2, SEA on ent29 (by linking a... (0 Replies)
Hi
In the vio server when I do # lsattr -El hdisk*, I get a PVID. The same PVID is also seen when I put the lspv command on the vio client partition. This way Im able to confirm the lun using the PVID.
Similarly how does the vio client partition gets the virtual ethernet scsi client adapter... (1 Reply)
I am trying to get my boss' ipad to print on our local printers, and rapidly coming to loathe the product.
After several false starts I'm attempting to use the free WePrint application, running on a Windows machine, to "forward" our printers from it to the ipad over the local network. I've hit... (2 Replies)
Hi guys,
I've been trying to tackle this issue for days and I'm stumped. Hopefully someone can give more light on what else I can do.
I have a p7 series box, with dual VIOS and 10 lpars and everything was working fine until I had to move the box to another location in the data centre. Ensured... (16 Replies)
Discussion started by: aixkidbee
16 Replies
LEARN ABOUT DEBIAN
paps
PAPS(1) General Commands Manual PAPS(1)NAME
paps - UTF-8 to PostScript converter using Pango
SYNOPSIS
paps [options] files...
DESCRIPTION
paps reads a UTF-8 encoded file and generates a PostScript language rendering of the file. The rendering is done by creating outline curves
through the pango ft2 backend.
OPTIONS
These programs follow the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is
included below.
--landscape
Landscape output. Default is portrait.
--columns=cl
Number of columns output. Default is 1.
Please notice this option isn't related to the terminal length as in a "80 culums terminal".
--font=desc
Set the font description. Default is Monospace 12.
--rtl Do right to left (RTL) layout.
--paper ps
Choose paper size. Known paper sizes are legal, letter and A4. Default is A4.
Postscript points
Each postscript point equals to 1/72 of an inch. 36 points are 1/2 of an inch.
--bottom-margin=bm
Set bottom margin. Default is 36 postscript points.
--top-margin=tm
Set top margin. Default is 36 postscript points.
--left-margin=lm
Set left margin. Default is 36 postscript points.
--right-margin=rm
Set right margin. Default is 36 postscript points.
--gutter-width=gw
Set gutter width. Default is 40 postscript points.
--help Show summary of options.
--header
Draw page header for each page.
--markup
Interpret the text as pango markup.
--lpi Set the lines per inch. This determines the line spacing.
--cpi Set the characters per inch. This is an alternative method of specifying the font size.
--stretch-chars
Indicates that characters should be stretched in the y-direction to fill up their vertical space. This is similar to the texttops
behaviour.
AUTHOR
paps was written by Dov Grobgeld <dov.grobgeld@gmail.com>.
This manual page was written by Lior Kaplan <kaplan@debian.org>, for the Debian project (but may be used by others).
April 17, 2006 PAPS(1)