Hi I was trying to mount my USB flashdrive on solaris 10 and I am getting the message saying that (I have already gone through the previous blogs in the forum)
mount: Block device required.
I have tried most of the possible ways.
#rmformat(gives me the necessary information about my flash... (1 Reply)
Hi all
A couple of new M5000 servers will be arriving soon and I need to work out how to configure the underlying domains.
It will come with 4 x CPUS, 32 Gb of memory, 4 x HD, 2 x IOtrays.
Reading the XSCF manual, I can configure the item into 2 domains, something about uni / quad xsb.... (9 Replies)
My previous post seems to be erased and I didn't get any help. I'm logged as root now but no mounting command seems to work, I've tried:
Mount -t vfat /dev/sdc1 /mnt/USB
Changing "sdc1" for hda1-7, and sdc1-7, and still nothing. Sometimes i get:
"special device not found" and others "device... (4 Replies)
I am very new to Solaris.
The machine I am working with is running Solaris 10.
I have a 1.5 TB hard drive plugged into a USB dock plugged into the Solaris machine. I ran 'cfgadm -al' and can see that the usb0/1 is usb-storage that was not there before.
How do i mount this drive and format... (3 Replies)
Hi, I've got an issue here: After I logon to the xscf prompt of this Sun M5000 and did 'XSCF> version -c xcp', the xscf prompt disappeared. I can't get it back and can't log out.
exit
rebootxscf
logout
#.
#>
#>
~#
~#
exit
sendbreak
exit
I tried to set the Mode Switch to the service... (3 Replies)
Hi,
I've configured this Sun M5000 to use two system domains (added a second domain to it). The following is the info about the settings. The showdevices command can't show devices on domain 1 because Solaris is not loaded on it yet.
My question: How can I confirm the hardware devices such as... (5 Replies)
Hi,
I would appreciate some help.
I remotely access, across a VPN, an M5000 and when I connect to the XSCF I can then access the OS using console -d0 and then I can get to the console.
The problem I have is that I need to run something which will take many hours and I can't run it in the... (6 Replies)
Hi all,
I'm developing a short program to look-up for all devices connected to the computer. Using udev and libusb libraries I achieved some progress but I can not find the way to find the mount point.
For instance, given a device that I can retrieve using libusb, I would like to know... (4 Replies)
Hi,
I'm planning to upgrade the XSCF firmware on an M5000, and have a question regarding the OBP part of the upgrade. At the moment, the system looks like this:
XCP0 (Current): 1100
OpenBoot PROM : 02.18.0000
XSCF : 01.10.0000
root@server01 # /usr/sbin/prtconf -V
OBP 4.24.15... (3 Replies)
I took over an M5000 and have a jumper server with a nic to connect to the console IP of an M5000. access via ssh user@ip.
it was working fine, another person can connect remotely on the subnet, but when I ssh,it just hangs and then times out.
so my question is,
any ideas of what I might... (4 Replies)
Discussion started by: rrodgers
4 Replies
LEARN ABOUT FREEBSD
urtwnfw
URTWNFW(4) BSD Kernel Interfaces Manual URTWNFW(4)NAME
urtwnfw -- Firmware Module for Realtek Wireless driver
SYNOPSIS
To compile this module into the kernel, place the following line in your kernel configuration file:
device urtwnfw
This will include three firmware images inside the kernel. If you want to pick only the firmware image for your network adapter choose one
of the following:
device urtwn-rtl8192cfwT
device urtwn-rtl8192cfwU
device urtwn-rtl8188eufw
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
urtwn-rtl8192cfwT_load="YES"
urtwn-rtl8192cfwU_load="YES"
urtwn-rtl8188eufw_load="YES"
DESCRIPTION
This module provides access to firmware sets for the Realtek RTL8188CUS, RTL8188CE-VAU, RTL8188EUS, RTL8188RU and RTL8192CU chip based USB
WiFi adapters. It may be statically linked into the kernel, or loaded as a module.
For the loaded firmware to be enabled for use the license at /usr/share/doc/legal/realtek must be agreed to by adding the following line to
loader.conf(5):
legal.realtek.license_ack=1
FILES
/usr/share/doc/legal/realtek urtwnfw firmware license
SEE ALSO urtwn(4), firmware(9)BSD April 25, 2014 BSD