Network issue in SLES11.2 Post: 302828439

10 More Discussions You Might Find Interesting

1. Ubuntu

Network issue

I have a Ubuntu linux (Ubuntu 6.06) at home. I have a ADSL modem (eth0) connected to it for my Broadband connection. It all works fine when the system gets started. But, when I receive a call, the link goes off. And then I lose my internet connection. I tried ifup/ifdown to bring the connection...

2. Solaris

Network interface issue

Hi All, I want to configure network into my system. i tried following in to configure the interface to find the name of interface #prtdiag |grep net i got following 0 PCI-1 33 1 network-SUNW, hme then i tried following #prtconf -v |grep net network, instance #0

3. SuSE

SLES11 - RAID6 all disks marked as Spare

Hello, After a replacement of the motherboard of my server, all disks belonging to a raid6 are now marked as spare. Is there any way to mark those disks as active and restore the raid6? $ cat /proc/mdstat Personalities : md1 : inactive sda1(S) sdk1(S) sdj1(S) sdi1(S) sdh1(S)...

4. Solaris

Zone network issue

Hi guys, I got a global zone with with two zones runnig. After a patch upgrade (July 2010) one of them stop to working fine: basically I can't ping it ( I mean I can ping from the other zone, but actually the ping pass across the global zone..) and I can't access it in ssh or telnet...(actually...

5. SuSE

XEN and SLES11

Good morning, Server:HP ProLiant DL165 G7 diskless with Disc on Storage OS:SLES11 SP1 and xen-3.3.1_18546_12-3.1 iSCSI:INTEL Gigabit ET Dual Port Server Adapter 825768 When I start SLES11 with Xen in boot-loader menu, then the boot will stop because linux could'nt find the iscsi interface...

6. Red Hat

VM network issue

Hi, I'm trying to create a lab environment in my personal laptop. I have created a virtualbox RHEL6.1 and I want to make another copy out of it to make it 4 instances by simply copying the whole folder and changing their name and then changing their IP addresses. is this OK? please advice. for...

7. Linux

Apache2-mpm-itk installation SLES11

Hi, do anyone know how to apply the corresponding apache2-mpm-itk patches to an already installed apache2 on a SLES11 machine? This is the link to the module: apache2-mpm-itk And this is the link to the patches: Index of /apache2.2-mpm-itk-2.2.17-01 Thanks

8. Solaris

Network Printing issue

I have network printer registerd in solaris environment. When I issue print, it prints banner page. The issue printer is registerd in Print server which is running on Linux environment. So when I issue print in Print server, it doesn't print banner page as banner settings are made to turn off It...

9. Red Hat

Network Bonding Issue

I have one production system where my customized application runs.The applications require seamless network connectivity with different machines connected in LAN and WAN. As these applications are very critical, it is very much required to have a seamless network activity.The applications are...

10. Red Hat

Network issue in same vlan

We have two hosts in same vlan with same route rules. One of them is not able to connect to an outside IP while in another I get "failed: Connection timed out" while testing the connectivity through netcat. I have tried mtr /traceroute and it gives me the same results. Is there a netcat...

LEARN ABOUT DEBIAN

gnome-network-preferences

gnome-network-preferences(1)					   User Commands				      gnome-network-preferences(1)

NAME

       gnome-network-preferences - configure network proxy

SYNOPSIS

       gnome-network-preferences [gnome-std-options]

DESCRIPTION

       The  Network  Proxy preference tool enables you to configure how your system connects to networks. You can configure the desktop to connect
       to a proxy server, and specify the details of the proxy server. A proxy server is a server that intercepts requests to another server,  and
       fulfills the request itself, if it can. You can enter the Domain Name Service (DNS) name or the Internet Protocol (IP) address of the proxy
       server.

OPTIONS

       The following options are supported:

       gnome-std-optionStandard options available for use with most GNOME applications. See gnome-std-options(5).

EXAMPLES

       Example 1: Launching the Network Proxy preference tool

       example% gnome-network-preferences

EXIT STATUS

       The following exit values are returned:

       0	Application exited successfully

       >0	Application exited with failure

FILES

       The following files are used by this application:

       /usr/bin/gnome-network-pExecutable for Network Proxy preferences tool

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+------------------------------+
       |      ATTRIBUTE TYPE	     |	     ATTRIBUTE VALUE	    |
       +-----------------------------+------------------------------+
       |Availability		     |SUNWgnome-desktop-preferences |
       +-----------------------------+------------------------------+
       |Interface stability	     |External			    |
       +-----------------------------+------------------------------+

SEE ALSO

       Preference Tools Manual

       Latest version of the GNOME Desktop User Guide for your platform.

       gnome-std-options(5)

NOTES

       Written by Glynn Foster, Sun Microsystems  Inc., 2003.

SunOS 5.10							    2 Oct 2003					      gnome-network-preferences(1)

10 More Discussions You Might Find Interesting

1. Ubuntu

Network issue

Discussion started by: ranj@chn

2. Solaris

Network interface issue

Discussion started by: kumarmani

3. SuSE

SLES11 - RAID6 all disks marked as Spare

Discussion started by: xavix

4. Solaris

Zone network issue

Discussion started by: cecco16