Port used by lp printer Post: 302827895

8 More Discussions You Might Find Interesting

1. HP-UX

add printer on serial port

I want to add printer on a serial port can I get full details of all parameters like baudrate, parity,flow control, ... Thanks

2. IP Networking

Does anybody know how to add a printer from network in Solaris 10 using IP settings? according to our IT support, in order to add this printer in Windows XP we introduce it as a local printer which is connected to a port with an IP address, like 128.79.44.110. Anyway I don't know how it can be done...

3. SCO

Printer port

I installed an old laser printer using a print server. I can use from windows but not from unix. I set up the printer in unix as a remote printer and can ping the print server from a unix promt. I am thinking that I must open a port to the print server. Any suggestions?

4. AIX

Check printer queue on Windows printer server

Hello Let me first give a small overview of the setup. All printers are connected to Windows 2000 servers. There are a lot of UNIX (AIX & HP-UX) servers as well which have SAP running. I'm working on a script to add printers to a specified SAP instance. I want to verify the user input (to...

5. OS X (Apple)

Accessing printer through serial port

Hey, im new to processing so any help you could give me would be much appreciated. I am trying to get control of the rollers on my 9 pin dot matrix printer (epson LX 300+). Initially I was going to do this through arduino but hope to do it through processing using the serialwrite programme. ...

6. SCO

additional printer port configuration in winxware 7

Dear Sir, How can install additional pci lpt card (parallel port) I want to install second dmp printer in unixware 7 server thanks n regards

7. IP Networking

Creating a printer emulator to capture PDL/PCL data coming in on port 9100.

I have a number of Windows CE operator terminals. They have facility to print alarms/messages to ... aser or Inkjet (so they're using PCL). USB or IP. IP connection takes just the IP address. Question How could I create a service or daemon on a server to capture all this data?...

8. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

LEARN ABOUT HPUX

tsm.lpadmin

tsm.lpadmin(1M) 														   tsm.lpadmin(1M)

NAME

       tsm.lpadmin - add or remove a printer for use with tsm(1)

SYNOPSIS

       printer model

       printer

DESCRIPTION

       is  used  to add (or remove) a printer to the LP spooling system when the printer is connected to the system through a terminal running the
       Terminal Session Manager (see tsm(1)).  is a shell script that uses in the normal way but also creates a named pipe to which LP	output	is
       directed (see lpadmin(1)).  This named pipe is opened by TSM and data flowing from it is sent to the printer through the terminal.

   Options
       recognizes the following options:

	      Names a printer to be created with an associated pipe.
			     If is used, must also be specified.

	      Selects a model interface program for
			     printer.	model is one of the model interface names supplied with the LP software (see the Models topic in the lpad-
			     min(1)) manual entry.  If is used, must also be specified.

	      Removes	     printer from the LP system.  No other options are allowed with

   Restrictions
       To use you must be user or

AUTHOR

       was developed by HP.

FILES

SEE ALSO

       lpadmin(1M), tsm(1).

																   tsm.lpadmin(1M)

8 More Discussions You Might Find Interesting

1. HP-UX

add printer on serial port

Discussion started by: Hegazy Mahdy

2. IP Networking

printer port setup

Discussion started by: arash05