Hello forum,
I have a Solaris 9 Sun Fire v240 server and Sun Fire v440
Recently we made changes and installed a new switch which both of them are connected to it. Cisco Catalyst 3750.
Now the Sun Server v240 is having problems with the network. It was supposed to run at 1000mbs speed.
I tried changing the settings by the following,
After that the link goes down.
HTML Code:
ndd -get /dev/bge0 link_status
0
The switches are configured at gigabit speeds.
Now I am confused as to why this is happening. The v440 is running at 1000 speed and it is connected to the same switch as the v240.
I was wondering if any of you have faced this similar problem before.
Could it be the problem with the Ethernet cable? But we are using the same cable that was used on the old switch and it was running at 1000 speeds before.
Thank you very much for your inputs!
Last edited by br1an; 07-04-2013 at 04:46 AM..
Reason: interface is bge0 not ce0
I am trying to set an interface to 100/Full, but the command I use are getting rejected. I think it is the last argument, but I don't know how to find the correct values.
I am trying to use the following script, but change hme to le .
echo "Setting hme interface 1: 100mb/full-duplex..."
... (2 Replies)
Hi Guys,
I need help with ndd.
I was going through network FAQ but i have more questions then answers regarding ndd.
#ndd -set /dev/hme instance 0
#ndd -set /dev/hme adv_100fdx_cap 1
#ndd -set /dev/hme adv_100hdx_cap 0
#ndd -set /dev/hme adv_10fdx_cap 0
#ndd -set /dev/hme adv_10hdx_cap 0... (2 Replies)
Hello Gurus
I would like to know more about ndd commands related to ethernet(NIC) like how to set link_status, link_speed & link_mode as I know how to check these value. And I also would like to know how to make these setting permanents after reboot as I know that these setting will vanish... (5 Replies)
Hi,
I would like to know whether there is any config file that i can refer to for the result of 'ndd -get /dev/tcp tcp_time_wait_interval'?
When i man 'ndd', there is one statement which is -> Each driver chooses which parameters to make visible using ndd. Does it answering my question above... (3 Replies)
Solaris 10 server (SunOS 5.10 Generic_137137_09)
I have a services file configured in /etc in there windows clients connect to my server on port 6034-6037
when I do the following
netstat | grep TestServices
it pulls all the connections active for those ports
so right now I have 10 clients... (3 Replies)
Following command was set up in startup script on Solaris 8 servers - improved network transfers of files from one server to the another (doubled transfer speed).
ndd -set /dev/tcp tcp_host_param '10.140.20.10 sendspace 279600 recvspace 279600 timestamp 1'
Now they are getting a new server... (15 Replies)
Hello,
I recently upgraded our system from Solaris 8 to 10. It seems couple of binaries crashed in the new server Solaris 10. Before digging too much on it , from theory it sounds like any binary that is built on Solaris 8 (using gmake) is supposed to be compatible with Solaris 10 , right ?
... (1 Reply)
Hi,
I'm having issues with sendmail when I try to send host to host mail. I've had to change the "my official domain name" line to mycompany.com to get the mails through the external spam filter, when a mail was sent with hostname.mycompany.com it was blocked. I had to change the Dj macro... (0 Replies)
Hi,
Recently, I had to disable autoneg in one of my servers having ixgbe1 interface. While using below command I got "Permission denied" error:
ndd -set /dev/ixgbe1 adv_autoneg_cap 0
On investigating further I found that adv_autoneg_cap is showing as read-only parameter. Although it is... (1 Reply)