SHSEIN(l)								 )								 SHSEIN(l)

NAME

       SHSEIN - use inverse iteration to find specified right and/or left eigenvectors of a real upper Hessenberg matrix H

SYNOPSIS

       SUBROUTINE SHSEIN( SIDE, EIGSRC, INITV, SELECT, N, H, LDH, WR, WI, VL, LDVL, VR, LDVR, MM, M, WORK, IFAILL, IFAILR, INFO )

	   CHARACTER	  EIGSRC, INITV, SIDE

	   INTEGER	  INFO, LDH, LDVL, LDVR, M, MM, N

	   LOGICAL	  SELECT( * )

	   INTEGER	  IFAILL( * ), IFAILR( * )

	   REAL 	  H( LDH, * ), VL( LDVL, * ), VR( LDVR, * ), WI( * ), WORK( * ), WR( * )

PURPOSE

       SHSEIN  uses inverse iteration to find specified right and/or left eigenvectors of a real upper Hessenberg matrix H.  The right eigenvector
       x and the left eigenvector y of the matrix H corresponding to an eigenvalue w are defined by:

		    H * x = w * x,     y**h * H = w * y**h

       where y**h denotes the conjugate transpose of the vector y.

ARGUMENTS

       SIDE    (input) CHARACTER*1
	       = 'R': compute right eigenvectors only;
	       = 'L': compute left eigenvectors only;
	       = 'B': compute both right and left eigenvectors.

       EIGSRC  (input) CHARACTER*1
	       Specifies the source of eigenvalues supplied in (WR,WI):
	       = 'Q': the eigenvalues were found using SHSEQR; thus, if H has zero subdiagonal elements, and so is block-triangular, then the j-th
	       eigenvalue  can be assumed to be an eigenvalue of the block containing the j-th row/column.  This property allows SHSEIN to perform
	       inverse iteration on just one diagonal block.  = 'N': no assumptions are made on the correspondence between eigenvalues and  diago-
	       nal blocks.  In this case, SHSEIN must always perform inverse iteration using the whole matrix H.

       INITV   (input) CHARACTER*1
	       = 'N': no initial vectors are supplied;
	       = 'U': user-supplied initial vectors are stored in the arrays VL and/or VR.

       SELECT  (input/output) LOGICAL array, dimension (N)
	       Specifies  the eigenvectors to be computed. To select the real eigenvector corresponding to a real eigenvalue WR(j), SELECT(j) must
	       be set to .TRUE.. To select the complex eigenvector corresponding to a complex eigenvalue  (WR(j),WI(j)),  with	complex  conjugate
	       (WR(j+1),WI(j+1)), either SELECT(j) or SELECT(j+1) or both must be set to

       N       (input) INTEGER
	       The order of the matrix H.  N >= 0.

       H       (input) REAL array, dimension (LDH,N)
	       The upper Hessenberg matrix H.

       LDH     (input) INTEGER
	       The leading dimension of the array H.  LDH >= max(1,N).

       WR      (input/output) REAL array, dimension (N)
	       WI	(input) REAL array, dimension (N) On entry, the real and imaginary parts of the eigenvalues of H; a complex conjugate pair
	       of eigenvalues must be stored in consecutive elements of WR and WI.  On exit, WR may have been altered since close eigenvalues  are
	       perturbed slightly in searching for independent eigenvectors.

       VL      (input/output) REAL array, dimension (LDVL,MM)
	       On  entry,  if INITV = 'U' and SIDE = 'L' or 'B', VL must contain starting vectors for the inverse iteration for the left eigenvec-
	       tors; the starting vector for each eigenvector must be in the same column(s) in which the eigenvector will be stored.  On exit,	if
	       SIDE  =	'L' or 'B', the left eigenvectors specified by SELECT will be stored consecutively in the columns of VL, in the same order
	       as their eigenvalues. A complex eigenvector corresponding to a complex eigenvalue is stored in two consecutive columns,	the  first
	       holding the real part and the second the imaginary part.  If SIDE = 'R', VL is not referenced.

       LDVL    (input) INTEGER
	       The leading dimension of the array VL.  LDVL >= max(1,N) if SIDE = 'L' or 'B'; LDVL >= 1 otherwise.

       VR      (input/output) REAL array, dimension (LDVR,MM)
	       On  entry, if INITV = 'U' and SIDE = 'R' or 'B', VR must contain starting vectors for the inverse iteration for the right eigenvec-
	       tors; the starting vector for each eigenvector must be in the same column(s) in which the eigenvector will be stored.  On exit,	if
	       SIDE  = 'R' or 'B', the right eigenvectors specified by SELECT will be stored consecutively in the columns of VR, in the same order
	       as their eigenvalues. A complex eigenvector corresponding to a complex eigenvalue is stored in two consecutive columns,	the  first
	       holding the real part and the second the imaginary part.  If SIDE = 'L', VR is not referenced.

       LDVR    (input) INTEGER
	       The leading dimension of the array VR.  LDVR >= max(1,N) if SIDE = 'R' or 'B'; LDVR >= 1 otherwise.

       MM      (input) INTEGER
	       The number of columns in the arrays VL and/or VR. MM >= M.

       M       (output) INTEGER
	       The  number  of	columns in the arrays VL and/or VR required to store the eigenvectors; each selected real eigenvector occupies one
	       column and each selected complex eigenvector occupies two columns.

       WORK    (workspace) REAL array, dimension ((N+2)*N)

       IFAILL  (output) INTEGER array, dimension (MM)
	       If SIDE = 'L' or 'B', IFAILL(i) = j > 0 if the left eigenvector in the i-th column of VL (corresponding	to  the  eigenvalue  w(j))
	       failed to converge; IFAILL(i) = 0 if the eigenvector converged satisfactorily. If the i-th and (i+1)th columns of VL hold a complex
	       eigenvector, then IFAILL(i) and IFAILL(i+1) are set to the same value.  If SIDE = 'R', IFAILL is not referenced.

       IFAILR  (output) INTEGER array, dimension (MM)
	       If SIDE = 'R' or 'B', IFAILR(i) = j > 0 if the right eigenvector in the i-th column of VR (corresponding to  the  eigenvalue  w(j))
	       failed to converge; IFAILR(i) = 0 if the eigenvector converged satisfactorily. If the i-th and (i+1)th columns of VR hold a complex
	       eigenvector, then IFAILR(i) and IFAILR(i+1) are set to the same value.  If SIDE = 'L', IFAILR is not referenced.

       INFO    (output) INTEGER
	       = 0:  successful exit
	       < 0:  if INFO = -i, the i-th argument had an illegal value
	       > 0:  if INFO = i, i is the number of eigenvectors which failed to converge; see IFAILL and IFAILR for further details.

FURTHER DETAILS

       Each eigenvector is normalized so that the element of largest magnitude has magnitude 1; here the magnitude of a complex  number  (x,y)	is
       taken to be |x|+|y|.

LAPACK version 3.0						   15 June 2000 							 SHSEIN(l)