Hi All,
:confused:
I had an issue with the USB in Solaris 10 Ultra SParc machine.
I am able to mount the USB in my machine using the mount command.
# mount -F pcfs /dev/dsk/c2t0d0s0:c /mnt
The problem is when i copy a file from my local hard disk to the USB using the " cp -p... (2 Replies)
Hi,
I am trying to mount via nfs4
# mount -t nfs4 10.1.56.16:/Apps /works/apps/xyz
Error:
Warning rpc.idmapd apperas not to be running
all uids will be mapped to the nobody uid
mount to NFS server "10.1.56.16' failed RPC error: program/version mismatched
pls help - this is coming... (1 Reply)
Hi,
I was running short of space on /tmp which was mounted on /. Now I tried to move /tmp to another device unfortunately everything in that particular folder got copied in /tmp so I reverted back by mounting it to /. But now it has started pointing to all folders with /. How do I get out of... (4 Replies)
Hi Friends,
My source server is HP and my destination is linux. I have to mount a dir thru nfs from source to destn. almost 8 servers i did the same thing and it is working fine but on the 9th server i can't able to mount.
Everything i have did for nfs configuration.Even i can able to ping... (1 Reply)
Hi There,
I have following issue:
# df -k
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda1 30470144 4200476 24696908 15% /
/dev/hda6 223461396 82243140 129683992 39% /apps
/dev/hda5 10153988 155100 9474772 2%... (3 Replies)
I format a usb key:
mkfs -t ext4 /dev/sdf1
mkfs -t ext4 /dev/sdf2
(also tried mkfs.ext4 /dev/sdfx and mke2fs -t ext4 /dev/sdfx)
and have the following:
# fdisk -l
Device Boot Start End Blocks Id System
/dev/sdf1 * 64 6097695 3048816 ... (0 Replies)
I have a virtual machine with Redhat installed .
I am trying to link CD/DVD Drive 1 to /media/cdrom1 and CD/DVD Drive 0 to /media/cdrom0
I tried making these changed in /etc/fstab by adding the below line to it
/dev/sr0 /media/cdrom0 iso9660 user,noauto,exec,utf8 0 0... (2 Replies)
we are facing a weird NFS mount issue on one of the linux host , a NFS volume of 2.4TB is mounted in the linux host , but df only reports 131g , which exactly matches rootfilesytem size
nfs mount
filer_filer1:/vol/bug_test/q0
131G 116G 8.5G 94% /nas/bug_test
root... (2 Replies)
Hi all
I have a mount issue, that is as follows:
somebody as mount a certain file system /sim5 on /, so when I do df -h /sim5it returns Filesystem size used avail capacity Mounted on
/dev/md/dsk/d10 9.6G 7.0G 2.6G 74% /, which is the same as df -h /... (25 Replies)
Discussion started by: fretagi
25 Replies
LEARN ABOUT LINUX
hd
HD(4) Linux Programmer's Manual HD(4)NAME
hd - MFM/IDE hard disk devices
DESCRIPTION
The hd* devices are block devices to access MFM/IDE hard disk drives in raw mode. The master drive on the primary IDE controller (major
device number 3) is hda; the slave drive is hdb. The master drive of the second controller (major device number 22) is hdc and the slave
hdd.
General IDE block device names have the form hdX, or hdXP, where X is a letter denoting the physical drive, and P is a number denoting the
partition on that physical drive. The first form, hdX, is used to address the whole drive. Partition numbers are assigned in the order
the partitions are discovered, and only nonempty, nonextended partitions get a number. However, partition numbers 1-4 are given to the
four partitions described in the MBR (the "primary" partitions), regardless of whether they are unused or extended. Thus, the first logi-
cal partition will be hdX5. Both DOS-type partitioning and BSD-disklabel partitioning are supported. You can have at most 63 partitions
on an IDE disk.
For example, /dev/hda refers to all of the first IDE drive in the system; and /dev/hdb3 refers to the third DOS "primary" partition on the
second one.
They are typically created by:
mknod -m 660 /dev/hda b 3 0
mknod -m 660 /dev/hda1 b 3 1
mknod -m 660 /dev/hda2 b 3 2
...
mknod -m 660 /dev/hda8 b 3 8
mknod -m 660 /dev/hdb b 3 64
mknod -m 660 /dev/hdb1 b 3 65
mknod -m 660 /dev/hdb2 b 3 66
...
mknod -m 660 /dev/hdb8 b 3 72
chown root:disk /dev/hd*
FILES
/dev/hd*
SEE ALSO chown(1), mknod(1), sd(4), mount(8)COLOPHON
This page is part of release 3.27 of the Linux man-pages project. A description of the project, and information about reporting bugs, can
be found at http://www.kernel.org/doc/man-pages/.
Linux 1992-12-17 HD(4)