The following was obtained by the "save" command in "format" on a Blade 1500.
If you append it to /etc/format.dat then "format" should offer the "DEFAULT" in the "type" command. Then you can write the Sun disk label with the "label" command.
The OS then will see a 127.5 GB disk.
This User Gave Thanks to MadeInGermany For This Post:
Hi,
I am attempting to configure my ethernet interface on a Sun Blade 1500. I am testing out my network interface my connecting a crossover cable from my blade to a windows box. I would like to assign an ip address of 10.0.0.2 to "bge0" and netmask of "255.0.0.0". I have typed the following:
... (1 Reply)
I'm not familiar with this particular machine and it's baffling me. For those that are familar with the workstation, allow me to paint a picture. If you were looking down on the machine (open) you would see the main board and then a riser board. On the left side of the riser board are jacks... (1 Reply)
Hi
I'm completely new in solaris,and don't know many about it.
I was installed solaris 10 on sun blade 1500,and also I need to install oracle on it.
Now I stuck on some thing and i'm sure that you help me.
When i started Oracle installation system told me that I don't have enogh swap space.... (1 Reply)
Hello,
I'm trying to compile PHP 5.3.6 with Apache2 and MySql 5.5.12. I hit a problem that I can't seem to resolve by myself and I could not find a solution on the web.
It looks like Apache and MySql installed ok, I can start/stop them with no problem.
When I try to compile PHP the... (4 Replies)
Hello,
I need to copy 1500+ files (total of 170mb) from our /tmp/directory to a different directory /application/program/files
I issue the command:
user@host> cp * /application/program/files
I am getting the follwing error:
ksh: /usr/bin/cp: arg list too long
being new to aix, I... (6 Replies)
Good afternoon all,
First, sorry for my English, this is not my first language but I try my best :).
So, here we go.
A friend of mine gave me an old Sun Blade 1500 he wasn't using. He said it was working fine except for the missing hard drive.
I had in my IT personnal box an old IDE... (33 Replies)
HI,
How do we figure out if the server is half blade server or full blade server?
Anything we need to look at to know on this?
thanks in advance (9 Replies)
Discussion started by: snchaudhari2
9 Replies
LEARN ABOUT OPENSOLARIS
bscv
bscv(7D) Devices bscv(7D)NAME
bscv, bscbus, i2bsc - Blade support chip interface driver
DESCRIPTION
The bscv, bscbus and i2bsc drivers interface with the Blade support chip used on Sun Microsystem's Blade server products. These drivers
provide a conduit for passing control, environmental, cpu signature and event information between Solaris and the Blade support chip.
These drivers do not export public interfaces. Instead they make information available via picl, prtdiag, prtfru and related tools. In
addition, these drivers log Blade support chip environmental event information into system logs.
FILES
/platform/sun4u/kernel/drv/sparcv9/bscbus
64-bit ELF kernel driver
/platform/sun4u/kernel/drv/sparcv9/bscv
64-bit ELF kernel driver
/platform/sun4u/kernel/drv/sparcv9/i2bsc
64-bit ELF kernel driver
/platform/i86pc/kernel/drv/bscbus
32-bit ELF kernel file (x86 only)
/platform/i86pc/kernel/drv/bscv
32-bit ELF kernel file (x86 only)
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
|ATTRIBUTE TYPE |ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |Limited to systems with |
| |Blade Support Chip |
+-----------------------------+-----------------------------+
|Availability |SUNWcar.u, SUNWcar.i |
+-----------------------------+-----------------------------+
SunOS 5.11 22 August 2003 bscv(7D)