@DukeNuke2............I see your post and I am now somewhat confused!! My understanding is that this is a 250 which has its own idiosyncrasies. Is there more than one 250?? Is a V250 different from a Enterprise 250?
I have attached what I would use as reference material for this. See the RSC guide pages 10-11.
I would now get the OP to double-check the setting by removing all power (including the SC, ie, completely remove power) and then cold boot watching diags (in case there's a hardware fault revealed), then issue a 'poweron', followed by 'console' (needing to check that the SC is, indeed, reset with the new parameter(s) in place.
@br1an....I suggest you wait until we've agreed a course of action.
Greetings To All!
I am trying to accomplish the following:
Using a public SNMP string, create a trap which will trap ALOM console messages on a Solaris Sunfire T-1000 ALOM console. The platform is Solaris 10. These newly created traps need to be configured in such a way that they will send... (0 Replies)
Hi,
I connected to ALOM on V240 installed with Solaris 10.
console -f does not give me console on screen.
Sun(tm) Advanced Lights Out Manager 1.6.8
sc> console -f
Enter #. to return to ALOM. ...I pressed ENTER a lot of times but does not give me console.
Another observation in this... (5 Replies)
Hello ,
I am connecting sumfire v245 server to my laptop Through ALOM method.i got the ALOM prompt but after that i am typing sc> console to go to system console but i am not able to,after typing console only this line is coming Type #. to go back to ALOM.
What to do ??
That server having... (5 Replies)
We are using software (Pegasys) which runs on SunOS 5.8 and reads images from a Philips nuclear camera. The software is designed to run from the console. I need to be able to capture the images it produces on the display. The caveat is that I cannot use the X Windows display because the X Server... (3 Replies)
:confused:Hi
This was installed on the Linux box a few weeks back by a guy that no longer works for us. All worked fine until last week. Now when we connect its just a blank screen with no icons.
I get a whole bunch of errors when starting the service too:
Tue Feb 23 14:29:45 2010
... (1 Reply)
Hi guys,
I'm in trouble with a Sunfire T2000.
The OS (Solaris10) is up and running, but I can't log in the sc>I think the terminal server is crashed!
Does anyone know if I can reset the sc> from the OS?
How can I do that?
Thx (6 Replies)
Hi Everyone.
What is the differece b/n ALOM and ALOM CMT Service processor.
I am trying reset ALOM login/passwd using scadm utility on T2000, while I am googling I came cross ALOM CMT doesnt support scadm utility, but ALOM supports.
Not sure how different are these.
Thanks, (0 Replies)
Hi,
How to set ip address on eth0 for access ssh from ALOM? Is it possible? Now i cannot access it because don't have VGA.
I keep try to access using ssh. Please guide me.
Thanks. (16 Replies)
Hi all,
I have some problems with the fan FT0.F0, which looks like has a problem with the PROM/ALOM ( I am nor sure who).....but, in fact, the fan is working properly even in other V440 Sparc Server.
We checked HW comunication between Fan and the MotherBoard, and we think is a problem of... (8 Replies)
Discussion started by: proof_enrique
8 Replies
LEARN ABOUT DEBIAN
load_dat_font
load_dat_font(3alleg4) Allegro manual load_dat_font(3alleg4)NAME
load_dat_font - Loads a FONT from an Allegro datafile.
SYNOPSIS
#include <allegro.h>
FONT *load_dat_font(const char *filename, RGB *pal, void *param)
DESCRIPTION
Loads a FONT from an Allegro datafile. You can set param parameter to point to an array that holds two strings that identify the font and
the palette in the datafile by name. The first string in this list is the name of the font. You can pass NULL here to just load the first
font found in the datafile. The second string can be used to specify the name of the palette associated with the font. This is only
returned if the pal parameter is not NULL. If you pass NULL for the name of the palette, the last palette found before the font was found
is returned. You can also pass NULL for param, which is treated as if you had passed NULL for both strings separately. In this case, the
function will simply load the first font it finds from the datafile and the palette that precedes it.
For example, suppose you have a datafile named `fonts.dat' with the following contents:
FONT FONT_1_DATA
FONT FONT_2_DATA
FONT FONT_3_DATA
PAL FONT_1_PALETTE
PAL FONT_2_PALETTE
Then the following code will load FONT_1_DATA as a FONT and return FONT_1_PALETTE as the palette:
FONT *f;
PALETTE pal;
char *names[] = { "FONT_1_DATA", "FONT_1_PALETTE" }
f = load_dat_font("fonts.dat", pal, names);
If instead you want to load the second font, FONT_2, from the datafile, you would use:
FONT *f;
PALETTE pal;
char *names[] = { "FONT_2_DATA", "FONT_2_PALETTE" }
f = load_dat_font("fonts.dat", pal, names);
If you want to load the third font, but not bother with a palette, use:
FONT *f;
char *names[] = { "FONT_3_DATA", NULL }
f = load_dat_font("fonts.dat", NULL, names);
RETURN VALUE
Returns a pointer to the font or NULL on error. Remember that you are responsible for destroying the font when you are finished with it to
avoid memory leaks.
SEE ALSO register_font_file_type(3alleg4), load_font(3alleg4)Allegro version 4.4.2 load_dat_font(3alleg4)