I have a SUN v250 at home that I have to practice Solaris. I currently have Solaris 9 installed and the ALOM Sun(tm) Advanced Lights Out Manager 1.5.2.
From the ALOM I want to access the console.
after that there is no response. Unless and until hit #. to get back to the ALOM.
I did this via serial cable, and by Network Mgnt Port both with the same result.
Any ideas how to get into console from ALOM?
Thank you in advance.
Last edited by Scott; 06-15-2013 at 01:02 PM..
Reason: Code tags not Icode tags
Greetings To All!
I am trying to accomplish the following:
Using a public SNMP string, create a trap which will trap ALOM console messages on a Solaris Sunfire T-1000 ALOM console. The platform is Solaris 10. These newly created traps need to be configured in such a way that they will send... (0 Replies)
Hi,
I connected to ALOM on V240 installed with Solaris 10.
console -f does not give me console on screen.
Sun(tm) Advanced Lights Out Manager 1.6.8
sc> console -f
Enter #. to return to ALOM. ...I pressed ENTER a lot of times but does not give me console.
Another observation in this... (5 Replies)
Hello ,
I am connecting sumfire v245 server to my laptop Through ALOM method.i got the ALOM prompt but after that i am typing sc> console to go to system console but i am not able to,after typing console only this line is coming Type #. to go back to ALOM.
What to do ??
That server having... (5 Replies)
We are using software (Pegasys) which runs on SunOS 5.8 and reads images from a Philips nuclear camera. The software is designed to run from the console. I need to be able to capture the images it produces on the display. The caveat is that I cannot use the X Windows display because the X Server... (3 Replies)
:confused:Hi
This was installed on the Linux box a few weeks back by a guy that no longer works for us. All worked fine until last week. Now when we connect its just a blank screen with no icons.
I get a whole bunch of errors when starting the service too:
Tue Feb 23 14:29:45 2010
... (1 Reply)
Hi guys,
I'm in trouble with a Sunfire T2000.
The OS (Solaris10) is up and running, but I can't log in the sc>I think the terminal server is crashed!
Does anyone know if I can reset the sc> from the OS?
How can I do that?
Thx (6 Replies)
Hi Everyone.
What is the differece b/n ALOM and ALOM CMT Service processor.
I am trying reset ALOM login/passwd using scadm utility on T2000, while I am googling I came cross ALOM CMT doesnt support scadm utility, but ALOM supports.
Not sure how different are these.
Thanks, (0 Replies)
Hi,
How to set ip address on eth0 for access ssh from ALOM? Is it possible? Now i cannot access it because don't have VGA.
I keep try to access using ssh. Please guide me.
Thanks. (16 Replies)
Hi all,
I have some problems with the fan FT0.F0, which looks like has a problem with the PROM/ALOM ( I am nor sure who).....but, in fact, the fan is working properly even in other V440 Sparc Server.
We checked HW comunication between Fan and the MotherBoard, and we think is a problem of... (8 Replies)
Discussion started by: proof_enrique
8 Replies
LEARN ABOUT OSF1
iscc
iscc(7) Miscellaneous Information Manual iscc(7)NAME
iscc - serial communications interface
SYNOPSIS
controller iscc0 at isa0
DESCRIPTION
An onboard Zilog 8530 DUART provides AXPvme-based Single Board Computers with console (CON) and auxiliary (AUX) serial communications
ports. Both serial communications ports can operate at baud rates from B50 to B38400, excluding B134 (see tty(7)).
On AXPvme Single Board Computers configured with a graphics head as the system console, the CON serial communications port (/dev/tty01) is
available for use by application programs as an additional communications port.
In the absence of a graphics head, the CON serial communications port (/dev/console) becomes the system console. When used as the serial
system console, the CON serial communications port always operates at 9600 BPS, 8-bits, and no parity.
Regardless of system console, the AUX serial communications port (/dev/tty00) is always available for use by application programs.
RESTRICTIONS
Data communications equipment attached to the CON serial communications port must be set to 9600 BPS, 8-bits, no parity when configured as
the serial system console. The iscc terminal driver enforces this restriction.
No modem control is supported for either the CON or AUX serial communications ports.
FILES
console terminal local terminal local terminal
RELATED INFORMATION console(7), devio(7), tty(7), MAKEDEV(8) delim off
iscc(7)