I have a SUN v250 at home that I have to practice Solaris. I currently have Solaris 9 installed and the ALOM Sun(tm) Advanced Lights Out Manager 1.5.2.
From the ALOM I want to access the console.
after that there is no response. Unless and until hit #. to get back to the ALOM.
I did this via serial cable, and by Network Mgnt Port both with the same result.
Any ideas how to get into console from ALOM?
Thank you in advance.
Last edited by Scott; 06-15-2013 at 01:02 PM..
Reason: Code tags not Icode tags
Greetings To All!
I am trying to accomplish the following:
Using a public SNMP string, create a trap which will trap ALOM console messages on a Solaris Sunfire T-1000 ALOM console. The platform is Solaris 10. These newly created traps need to be configured in such a way that they will send... (0 Replies)
Hi,
I connected to ALOM on V240 installed with Solaris 10.
console -f does not give me console on screen.
Sun(tm) Advanced Lights Out Manager 1.6.8
sc> console -f
Enter #. to return to ALOM. ...I pressed ENTER a lot of times but does not give me console.
Another observation in this... (5 Replies)
Hello ,
I am connecting sumfire v245 server to my laptop Through ALOM method.i got the ALOM prompt but after that i am typing sc> console to go to system console but i am not able to,after typing console only this line is coming Type #. to go back to ALOM.
What to do ??
That server having... (5 Replies)
We are using software (Pegasys) which runs on SunOS 5.8 and reads images from a Philips nuclear camera. The software is designed to run from the console. I need to be able to capture the images it produces on the display. The caveat is that I cannot use the X Windows display because the X Server... (3 Replies)
:confused:Hi
This was installed on the Linux box a few weeks back by a guy that no longer works for us. All worked fine until last week. Now when we connect its just a blank screen with no icons.
I get a whole bunch of errors when starting the service too:
Tue Feb 23 14:29:45 2010
... (1 Reply)
Hi guys,
I'm in trouble with a Sunfire T2000.
The OS (Solaris10) is up and running, but I can't log in the sc>I think the terminal server is crashed!
Does anyone know if I can reset the sc> from the OS?
How can I do that?
Thx (6 Replies)
Hi Everyone.
What is the differece b/n ALOM and ALOM CMT Service processor.
I am trying reset ALOM login/passwd using scadm utility on T2000, while I am googling I came cross ALOM CMT doesnt support scadm utility, but ALOM supports.
Not sure how different are these.
Thanks, (0 Replies)
Hi,
How to set ip address on eth0 for access ssh from ALOM? Is it possible? Now i cannot access it because don't have VGA.
I keep try to access using ssh. Please guide me.
Thanks. (16 Replies)
Hi all,
I have some problems with the fan FT0.F0, which looks like has a problem with the PROM/ALOM ( I am nor sure who).....but, in fact, the fan is working properly even in other V440 Sparc Server.
We checked HW comunication between Fan and the MotherBoard, and we think is a problem of... (8 Replies)
Discussion started by: proof_enrique
8 Replies
LEARN ABOUT FREEBSD
conscontrol
CONSCONTROL(8) BSD System Manager's Manual CONSCONTROL(8)NAME
conscontrol -- control physical console devices
SYNOPSIS
conscontrol [list]
conscontrol mute on | off
conscontrol add | delete console
conscontrol set | unset console
DESCRIPTION
The conscontrol utility is used to examine and modify the physical devices which back the virtual console devices. If no arguments (or only
the list command) are specified, the current console settings are shown.
There are two types of logical consoles; a high level console which is represented by /dev/console, and a low level console. The low level
console is used for kernel printf(9) and ddb(4) debugger support, while the high level console is used by user programs like syslogd(8).
Multiple device support is implemented only for the low level console; the high level console is set to the first device in the console list.
Multiple console support may be invoked by passing the kernel the -D flag from the boot loader, or by using conscontrol to change the list of
console devices after the system has booted.
The following options are available:
add | delete console
Add or delete a physical device from the logical console. The device must support low-level console operations. Adding a device
will place it at the front of the list of console devices; the first device is used for the high level console.
The console argument is the name of a console device in /dev; the name of the directory may be omitted.
mute on | off
Change the state of console muting. All console output is suppressed when console muting is on.
set | unset console
Set or unset the virtual console. When unset, output from the system, such as the kernel printf(9), always goes out to the real main
console. When set, it goes to another. This is an interface to the tty ioctl TIOCCONS.
SEE ALSO sio(4), syscons(4), tty(4), vt(4), boot(8), loader(8)HISTORY
The conscontrol utility first appeared in FreeBSD 5.0.
AUTHORS
Jonathan Lemon
BSD April 14, 2011 BSD