06-10-2013
Moving hard drive and SCSI adapter to another computer
OK group, it's been 12 years since I worked with SCO. I need some direction here:
SCO Openserver 5.07
I have a server with a bad motherboard. I have moved the SCSI adapter and hard drive to another computer. This new server has different hardware so I must install the chipset drivers for the new motherboard (IDE, network adapter).
The system boots and I can log in, but I cannot yet put it on the network because the new NIC is not installed. I can't install the NIC driver because it does not see the new CDROM. I have not yet tried the floppy drive.
Thanks for any help.
Joe
Last edited by jscholz; 06-10-2013 at 12:16 PM..
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Can anyone out there help me out? I'm trying to install a scsi tape back up on a sys running sco openserver 5.0.4. When I go through the steps for mkdev tape it seems like it works, but when I reboot I still don't see the tape. Also when it boots up I get a scsi bios not installed error. I've... (1 Reply)
Discussion started by: goatboy_tx
1 Replies
2. Solaris
Hi. I need to find a simple SCSI adapter card for a Sun Ultra 5 workstation. I don't need the type w/ ethernet attached (e.g. X1032) as I already have ethernet onboard & they are more spendy.
I know Adaptec is out, but what unit would work? I am attaching an external SCSI tape unit to this... (4 Replies)
Discussion started by: Plain Person
4 Replies
3. Solaris
Okay. I admit I'm sort of a newbie in this regard.
I installed a SCSI adapter on a Sun Ultra 5 workstation. I did the standard STOP-A on the startup and got the OK prompt. I then tried probe-scsi-all. It dumps me back @ the OK prompt w/ no message whatsoever. I tried probe-scsi, nothing.
... (3 Replies)
Discussion started by: Plain Person
3 Replies
4. UNIX for Dummies Questions & Answers
I am interested in booting up my unix computer by connecting an external SCSI drive( intergraph) to it. The unix box is also an intergraph computer. Whenever I boot it, it gives me an error that says Drive not ready, Insert Boot Diskette in A. What am I doing wrong?
Any input would be... (3 Replies)
Discussion started by: teruotor
3 Replies
5. Filesystems, Disks and Memory
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies
6. UNIX for Dummies Questions & Answers
Someone gave me a small external SCSI hard drive for my SunOS 5.8 test system. How do I make Unix see the hard drive? (2 Replies)
Discussion started by: FredSmith
2 Replies
7. SCO
Situation - i have an IDE hard drive from server apparently running SCO last used in 2003. No access to computer it was formerly in. I need to access the drive to pull off data files from a billing/scheduling program. I have no SCO machine or access to one atm. Have some limited Linux... (3 Replies)
Discussion started by: lordlars1
3 Replies
8. Solaris
Guys,
I have googled and checked this forum in detail and couldn't find any satisfactory answers for my problem.
I am trying to connect a external SCSI hard Drive(Sea Gate) to a Ultra 80.
I connected it powered it up and at OK prompt did : boot -r
system comes up and complains about not... (6 Replies)
Discussion started by: ajnabi
6 Replies
9. Hardware
I need to connect 80pin SCA Ultra320 SCSI hdd to 68pin.
There are rumors that some bad "passive" adapters with problematic termination can fry the HDD. The adapter we got is Assmann ABSCA-2. Hard drive is 'Fujitsu MAW3073NC'
Do we need to set any jumpers before turning it on?
We already had... (0 Replies)
Discussion started by: orange47
0 Replies
10. Solaris
To Solaris 8 Experts,
Please let me know what's the best method / procedure as well as the Solaris 8 commands for accomplishing the following tasks on a production Sun Enterprise 250 Server running Sun Solaris 8 Operating System:
1. Make an exact image/copy of the SCSI Hard Drive in the... (3 Replies)
Discussion started by: ssabet
3 Replies
LEARN ABOUT OSF1
atapi_ide
atapi_ide(7) Miscellaneous Information Manual atapi_ide(7)
NAME
atapi_ide - Interface for ATAPI or IDE (PC) devices
SYNOPSIS
PCI bus CMD/Acer ATAPI/IDE adapter:
bus pci0 at *
bus ata0 at *
controller scsi0 at ata0 slot 0
controller scsi1 at ata0 slot 1
PCI bus Cypress ATAPI/IDE adapter:
bus pci0 at *
bus ata0 at *
bus ata1 at *
controller scsi0 at ata0 slot 0
controller scsi1 at ata1 slot 0
PCMCIA bus ATA/IDE disk card:
bus pcmcia0 at *
bus ata0 at pcmcia?
controller scsi0 at ata0
DESCRIPTION
Devices commonly known for their use on PC devices as ATA or IDE devices are supported using the SCSI CAM device driver. The ATA standard
has also been expanded to include what are known as ATAPI devices. The SCSI CAM device driver is also used for those disks and CD-ROM
devices. These devices may also be known under the names EIDE, ATA-2, Fast-ATA, or Ultra-ATA.
Beacuse the ATA/IDE standard was not developed until after many of the devices that used this standard were produced, there are many
devices which do not strictly comply with the standard. While it is possible some industry standard devices may appear to work, it is also
possible they will cause hang or data corruption cases when used under more stressful situations. For this reason, it is recommended that
only the supported devices be used. These devices have been tested and are certified for correct operation.
ATAPI/IDE controllers allow the connection of two devices. These two devices are known as the master device and the slave device. If only
one device is connected, that device must be the master (slave-only configurations are not supported). When used by the SCSI CAM device
driver, the IDE master device is assigned SCSI id 0 for that controller. The slave device is assigned SCSI id 1 for that controller. No
other SCSI ids are assigned on that controller. Most ATAPI/IDE adapters contain two channels (known as the primary and secondary). Each
of these channels may contain their own master and slave devices. Therefore, a dual channel ATAPI/IDE controller may contain up to 4
devices (a master and slave pair on each channel). These 4 devices are then accessed as SCSI id 0 and 1 on each channel.
Many SCSI operations translate perfectly for use on IDE. For example, read and write operations are the same. However, many SCSI disk
mode pages are emulated by the IDE device driver. For example, you can display the SCSI inquiry mode pages using the following command: %
scu show inq pages pages are created by the device driver to contain the long (full IDE) form of the device name, serial number, revision,
and the operational modes of the device. Only a shortened version of this information is available with the standard SCSI inquiry command.
Note also that the following command: % scu show pages Shows that the SCSI mode pages contain only partial information. Only that informa-
tion (such as geometry) that the drive reports to the system is able to be reformatted into these emulated SCSI mode pages. Much of the
information (such as RPM) is simply not available from the drive, and therefore not accurately reported.
ATAPI devices are much more closely related to SCSI devices, and as such contain their own mode pages. Therefore, for these devices, the
mode page values reported are those from the device, and no emulation is involved.
ATAPI tape devices are not supported at this time.
FILES
/dev/disk/dsk??? /dev/disk/dsk???
RELATED INFORMATION
SCSI(7), rz(7), and disklabel(8) delim off
atapi_ide(7)