Yes, as I said in my previous post, I was able to create the pool again, and it is now online. I can destroy the pool again and then be able to access the disk, but still am stuck at how to partition the disk.
Yes, I used fdisk subcommand, this is the disk after I created a label:
I want to know how can I create a couple partitions.
Last edited by Scott; 06-07-2013 at 06:46 PM..
Reason: Code tags
Hello!
I recently inherited system administration duties for a SUN v880 box. The system has 6 physical hard disks.. In doing some basic maintenance, I found they're configured for mirroring. I ran the metastat and metadb commands, and many of the mirrors are showing they are in need of... (5 Replies)
Hi, I have a AIX 4.3 box here with problems cause of a disk in below VG.
volume group: workvg
lspv
hdisk4 000166789869ab2d workvg
hdisk5 000166789869b96b workvg
now hdisk4 disk has failed and cause the quorum was set, workvg became varied off.
I have to replace the... (2 Replies)
Hello,
I am trying to do mirror in solaris 9. I have total 0-7 disks
4 5 6 7
0 1 2 3
Drive 0 and Drive 4 = Boot Drives
Need to Mirror following drives.
Drive 1 and Drive 5 = Need to mirror
Drive 1 was mounted on: /prod1, /prod2, /prod3, /prod4, /prod5.
Then i... (3 Replies)
hi guys,
I've got a strange issue, may be one of you has experienced this.
SunOS 5.10 Generic_118833-33 sun4u sparc SUNW,Sun-Fire-V440
everything is mirrored.
My issue is that I have a umpty directory but seems to have data on. Let me show you
# df -h /data
Filesystem size used... (10 Replies)
We have a filesystem which contains 8 hard disks but i am facing disk I/O issue becuase data is not spreading across all the disks.Is there any way i can check how data is spreading and any parameter we need to change to spread ata across all disks.
OS--AIX 5.3 (3 Replies)
Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment.
Let me know if you need any deatils on this.
Thanks,
Rama (1 Reply)
Hi all,
I guess most of you have seen this error message while installing Solaris 10 on an x86 platform. I got the error message while installing from DVD ISO on my home VMWare ESXi server.
It took me a long time to figure the exact issue and a subsequent solution. the solution is very... (1 Reply)
I have a solaris 10 system configured using NetApp as its storage, and the file systems are already configured as you can see from the example below:
root@moneta # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 9.8G 513M 9.3G 6% /
... (0 Replies)
I have a solaris 10 system configured using NetApp as its storage, and the file systems are already configured as you can see from the example below:
root@moneta # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 9.8G 513M 9.3G 6% /... (4 Replies)
Hello all,
Our Solaris 9? Sun Fire 480R backup server(in another city) is throwing disk errors such as these repeatedly.
WARNING: vxvm:vxio: Subdisk rootdisk-02 block 24037056: Uncorrectable read error
WARNING: vxvm:vxio: Subdisk rootdisk-02 block 7767072: Uncorrectable write error
... (18 Replies)