Hello!
I recently inherited system administration duties for a SUN v880 box. The system has 6 physical hard disks.. In doing some basic maintenance, I found they're configured for mirroring. I ran the metastat and metadb commands, and many of the mirrors are showing they are in need of... (5 Replies)
Hi, I have a AIX 4.3 box here with problems cause of a disk in below VG.
volume group: workvg
lspv
hdisk4 000166789869ab2d workvg
hdisk5 000166789869b96b workvg
now hdisk4 disk has failed and cause the quorum was set, workvg became varied off.
I have to replace the... (2 Replies)
Hello,
I am trying to do mirror in solaris 9. I have total 0-7 disks
4 5 6 7
0 1 2 3
Drive 0 and Drive 4 = Boot Drives
Need to Mirror following drives.
Drive 1 and Drive 5 = Need to mirror
Drive 1 was mounted on: /prod1, /prod2, /prod3, /prod4, /prod5.
Then i... (3 Replies)
hi guys,
I've got a strange issue, may be one of you has experienced this.
SunOS 5.10 Generic_118833-33 sun4u sparc SUNW,Sun-Fire-V440
everything is mirrored.
My issue is that I have a umpty directory but seems to have data on. Let me show you
# df -h /data
Filesystem size used... (10 Replies)
We have a filesystem which contains 8 hard disks but i am facing disk I/O issue becuase data is not spreading across all the disks.Is there any way i can check how data is spreading and any parameter we need to change to spread ata across all disks.
OS--AIX 5.3 (3 Replies)
Need a procedure document to do "root disk mirroring in solaris volume manager for solaris 10". I hope some one will help me asap. I need to do it production environment.
Let me know if you need any deatils on this.
Thanks,
Rama (1 Reply)
Hi all,
I guess most of you have seen this error message while installing Solaris 10 on an x86 platform. I got the error message while installing from DVD ISO on my home VMWare ESXi server.
It took me a long time to figure the exact issue and a subsequent solution. the solution is very... (1 Reply)
I have a solaris 10 system configured using NetApp as its storage, and the file systems are already configured as you can see from the example below:
root@moneta # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 9.8G 513M 9.3G 6% /
... (0 Replies)
I have a solaris 10 system configured using NetApp as its storage, and the file systems are already configured as you can see from the example below:
root@moneta # df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d0 9.8G 513M 9.3G 6% /... (4 Replies)
Hello all,
Our Solaris 9? Sun Fire 480R backup server(in another city) is throwing disk errors such as these repeatedly.
WARNING: vxvm:vxio: Subdisk rootdisk-02 block 24037056: Uncorrectable read error
WARNING: vxvm:vxio: Subdisk rootdisk-02 block 7767072: Uncorrectable write error
... (18 Replies)
Discussion started by: RyanV
18 Replies
LEARN ABOUT OSF1
mlabel
mlabel(1) General Commands Manual mlabel(1)NAME
mlabel - mtools utility to label a DOS volume
SYNOPSIS
mlabel [-v] drive:
OPTIONS
Displays the new volume label if the label supplied is invalid.
DESCRIPTION
The mlabel command displays the current volume label, if present, and prompts the user for a new volume label. To delete an existing vol-
ume label, press the Return Key at the prompt.
Reasonable care is taken to create a valid DOS volume label. If an invalid label is specified, the mlabel command changes the label and
displays the new label if the -v option is specified.
EXIT STATUS
The following exit values are returned: Success. Failure.
ENVIRONMENT VARIABLES
The following environment variables affect the execution of mlabel: If set, this variable names the file that contains the name of the cur-
rent mtools working directory as established by the mcd command. If this variable is not set, the file $HOME/.mcwd is used.
FILES
Contains the name of the current mtools working directory as established by the mcd command. If this file does not exist, the default
mtools working directory is A:. Executable file
SEE ALSO
Commands: mformat(1), mtools(1)mlabel(1)